PDF Apple 9L0-003 – Flydumps Study Guide Of Latest 100-101 Guarantee You 100% Pass

Latest 9L0-003 Questions, PDF Apple 9L0-003 – Pass4itsure.com Study Guide Of Latest 100-101 Guarantee You 100% Pass

An eMac (USB 2.0) has a malfunctioning logic board. You replace the logic board. Which of the following diagnostics utilities should you run to verify that the new logical board is functioning properly?
A. MacTest Pro
B. Disk First Air
C. TechTool Deluxe
D. Apple Service Diagnostic

Correct Answer: D QUESTION 2
Which of the following is ALMOST CERTAINLY a hardware-related problem?
A. No video at startup
B. Error beep at startup
C. Distorted video at startup
D. Blinking question mark at startup

Correct Answer: B QUESTION 3
You have just reassembled an iMac (Flat Panel) after replacing its logical board. You start up the iMac and the unit powers on, a startup chime is heard, the hard drive sounds normal, and the unit seems to be booting, but there is only a blank white image displayed on the LCD display. You shut the unit down, connect an external VGA display to the iMac and try again. This time, a normal startup sequence is displayed only on the external VGA display.
What is the most likely cause of this problem among the choices listed?
A. The LCD display is malfunctioning.
B. A faulty replacement logic board was installed.
C. The video cable connector was not reattached to the logic board.
D. The LCD display requires adjustment after logic board replacement.

Correct Answer: C QUESTION 4
To isolate a video problem has hardware or software on an iMac (Plat Panel), which of the following steps should you try first?
A. Connect an external VGA display.
B. Reinstall the appropriate Mac OS.
C. Verify the hard disk with Disk First Aid.
D. Start up from a known-good startup disc.

Correct Answer: D QUESTION 5
Which of the following would be the most appropriate question to ask FIRST, when gathering information from customers about a problem with their Apple product?
A. What is the issue?
B. What operating system are you using?
C. Did you turn off the computer improperly?
D. Is this the first time you have had this problem?

Correct Answer: A
Verifying that a computer functions properly after you repair it ensures that __________. (Choose all that apply)
A. No new issues have arisen.
B. Third-party software is working.
C. The original issue has been resolved.
D. The computer fails under service warranty.
E. System Preference settings are set correctly.

Correct Answer: AC
A customer’s eMac (USB 2.0) if freezing intermittently. Which of the following steps should you try FIRST to identify the problem?
A. Try quick fixes.
B. Repair the eMac.
C. Perform a split-half search
D. Run appropriate diagnostics
E. Escalate the problem to Apple.
F. Gather information about the problem.

Correct Answer: F
Which of the following is the best way to eject a disc when normal methods for ejecting it, such as using the MAC OS Desktop or the keyboard, have not succeeded?
A. Boot into Open Firmware and type ‘reset-nvram’.
B. Restart the computer while holding down the mouse button.
C. Remove and disassemble the optical drive to remove the disc.
D. Remove the computer’s front bezel and manually pry the disc out of the drive.

Correct Answer: B
A customer’s Power G5 fails to power on when connected to a known-good power outlet with a known-good power cord. Which of the following steps should be tried FIRST?
A. Replace the processor(s)
B. Replace the power supply
C. Reset the logic board PMU
D. Run Apple Service Diagnostic

Correct Answer: C
A Power Mac G4 (FW 800) boots but produces no startup chime. You have disconnected external microphones and speakers verified the volume setting and that mutes is not checked. What is the next recommended step to resolve this issue?
A. Reset Parameter RAM.
B. Replace the internal speaker.
C. Replace the main logic board.
D. Update the latest version of Mac OS X.

Correct Answer: A

You may also like