Authentic Microsoft Azure Administrator AZ-104 Dumps New Practice Questions Share

Microsoft Azure Administrator AZ-104 Dumps New Practice Questions

Authentic Microsoft Azure Administrator AZ-104 dumps and new practice questions are the best way to solve the puzzle by passing the Microsoft Azure Administrator exam.

The AZ-104 exam is very content, and there are a lot of fake AZ-104 dumps and practice questions online. Without good learning resources, it is very difficult and time-consuming to understand and gain hands-on experience with so much content. Authentic Microsoft Azure Administrator AZ-104 dumps will help you understand exam questions and how to pass the Microsoft Azure AZ-104 exam.

Download the authentic Microsoft Azure Administrator AZ-104 dumps PDF or VCE mode https://www.pass4itsure.com/az-104.html to get Microsoft Azure certified and start your journey.

First of all, you need to understand the Microsoft AZ-104 exam, for which I have roughly sorted out the key points of the exam:

The AZ-104 exam is divided into six main sections, specifically:

  1. AZ-104: Prerequisites for Azure administrators
  2. AZ-104: Manage identities and governance in Azure
  3. AZ-104: Implement and manage storage in Azure
  4. AZ-104: Deploy and manage Azure compute resources
  5. AZ-104: Configure and manage virtual networks for Azure administrators
  6. AZ-104: Monitor and back up Azure resources

This learning path helps you prepare for Exam AZ-104: Microsoft Azure Administrator. For details, please click here https://learn.microsoft.com/en-us/training/paths/az-104-administrator-prerequisites/

Microsoft Azure Certification-related exams are:

It costs $165 to take the Microsoft Azure Administrator exam, the total number of questions is about 40-60, and you need to reach 700 (in units of 1000) to pass, and the time limit for the exam is 120 minutes, so you need to hurry.

Microsoft Azure Administrator AZ-104 Exam has changed on October 26, 2023, so stay tuned

It is important not to use old resources to prepare for the exam, which will not be useful for the changed AZ-104 exam. You’ll need to learn more about the latest changes.

The AZ-104 update adds the following:

The storage section has been re-documented with a new AZ-104 video on web applications, containers, and Kubernetes.
Updated videos for ACI Container Instances, ARM Templates, Azure AD, Public and Private DNS, Azure Site Recovery, Load Balancer, Application Gateway, Firewall, Storage Access Layer, Lifecycle Management, AD Access Storage, and Virtual WAN.
Added Powershell section of PowerShell 7, virtual machine section, and content on virtual machine encryption

Changelog
https://learn.microsoft.com/en-us/credentials/certifications/resources/study-guides/az-104#change-log (Official Credibility 100)

It’s been a long time coming, and it’s time for the sharing session that interests you the most! Authentic AZ-104 dumps and new practice questions for free!

Share some of the authentic Microsoft Azure Administrator AZ-104 dumps new practice questions for free:

The information is briefly summarized below:

The 15 exam questions shared are from Pass4itSure. This is only a part of the full Microsoft Azure Administrator AZ-104 dumps, all of which have 763 practice questions in the AZ-104 dumps.

Alright, let’s get down to business.

Question 1:

You have a Microsoft 365 tenant and an Azure Active Directory (Azure AD) tenant named contoso.com.

You plan to grant three users named User1, User2, and User3 access to a temporary Microsoft SharePoint document library named Library1.

You need to create groups for the users. The solution must ensure that the groups are deleted automatically after 180 days.

Which two groups should you create? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

A. a Security group that uses the Assigned membership type

B. an Office 365 group that uses the Assigned membership type

C. an Office 365 group that uses the Dynamic User membership type

D. a Security group that uses the Dynamic User membership type

E. a Security group that uses the Dynamic Device membership type

Correct Answer: BC

You can set expiration policy only for Office 365 groups in Azure Active Directory (Azure AD). Note: With the increase in usage of Office 365 Groups, administrators and users need a way to clean up unused groups. Expiration policies can

help remove inactive groups from the system and make things cleaner.

When a group expires, all of its associated services (the mailbox, Planner, SharePoint site, etc.) are also deleted.

You can set up a rule for dynamic membership on security groups or Office 365 groups.

Incorrect Answers:

A, D, E: You can set expiration policy only for Office 365 groups in Azure Active Directory (Azure AD).

References:

https://docs.microsoft.com/en-us/office365/admin/create-groups/office-365-groups-expiration- policy?view=o365-worldwide

Question 2:

You have an Azure Storage account named storage1.

You plan to use AzCopy to copy data to storage1.

You need to identify the storage services in storage1 to which you can copy the data.

What should you identify?

A. blob, file, table, and queue

B. blob and file only

C. file and table only

D. file only

E. blob, table, and queue only

Correct Answer: B

AzCopy is a command-line utility that you can use to copy blobs or files to or from a storage account.

Incorrect Answers:

A, C, E: AzCopy does not support table and queue storage services.

D: AzCopy supports file storage services, as well as blob storage services.

Reference: https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy-v10

Question 3:

HOTSPOT

You have an Azure subscription named Subscription1 that contains the quotas shown in the following table.

Microsoft Azure Administrator AZ-104 q3
Microsoft Azure Administrator AZ-104 q3-2

Hot Area:

Microsoft Azure Administrator AZ-104 q3-3

Correct Answer:

Microsoft Azure Administrator AZ-104 q3-4

Question 4:

You have the Azure virtual network named VNet1 that contains a subnet named Subnet1. Subnet1 contains three Azure virtual machines. Each virtual machine has a public IP address.

The virtual machines host several applications that are accessible over port 443 to users on the Internet.

Your on-premises network has a site-to-site VPN connection to VNet1.

You discover that the virtual machines can be accessed by using the Remote Desktop Protocol (RDP) from the Internet and from the on-premises network.

You need to prevent RDP access to the virtual machines from the Internet, unless the RDP connection is established from the on-premises network. The solution must ensure that all the applications can still be accessed by the Internet users.

What should you do?

A. Modify the address space of the local network gateway.

B. Remove the public IP addresses from the virtual machines.

C. Modify the address space of Subnet1.

D. Create a deny rule in a network security group (NSG) that is linked to Subnet1.

Correct Answer: D

You can filter network traffic to and from Azure resources in an Azure virtual network with a network security group. A network security group contains security rules that allow or deny inbound network traffic to, or outbound network traffic from, several types of Azure resources. You can use a site-to-site VPN to connect your on-premises network to an Azure virtual network. Users on your on-premises network connect by using the RDP or SSH protocol over the site-to-site VPN connection. You don\’t have to allow direct RDP or SSH access over the internet. And this can be achieved by configuring a deny rule in a network security group (NSG) that is linked to Subnet1 for RDP / SSH protocol coming from internet.

Modify the address space of Subnet1 : Incorrect choice Modifying the address space of Subnet1 will have no impact on RDP traffic flow to the virtual network. Modify the address space of the local network gateway : Incorrect choice Modifying the address space of the local network gateway will have no impact on RDP traffic flow to the virtual network. Remove the public IP addresses from the virtual machines : Incorrect choice If you remove the public IP addresses from the virtual machines, none of the applications be accessible publicly by the Internet users.

Reference: https://docs.microsoft.com/en-us/azure/virtual-network/security-overview https://docs.microsoft.com/en-us/azure/security/fundamentals/network-best-practices

Question 5:

You have an Azure subscription.

You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit tab.)

Microsoft Azure Administrator AZ-104 q5

You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.

What should you modify on VM1?

A. Integration Services

B. the network adapters

C. the memory

D. the hard drive

E. the processor

Correct Answer: D

From the exhibit we see that the disk is in the VHDX format. Before you upload a Windows virtual machines (VM) from on-premises to Microsoft Azure, you must prepare the virtual hard disk (VHD or VHDX). Azure supports only generation 1 VMs that are in the VHD file format and have a fixed sized disk. The maximum size allowed for the VHD is 1,023 GB. You can convert a generation 1 VM from the VHDX file system to VHD and from a dynamically expanding disk to fixed-sized. References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/prepare-for-upload-vhd- image?toc=%2fazure%2fvirtual-machines%2fwindows%2ftoc.json

Question 6:

HOTSPOT

You have an Azure subscription named Sub1 that contains the resources shown in the following table.

Microsoft Azure Administrator AZ-104 q6

Sub1 contains the following alert rule:

Name: Alert1 Scope: All resource groups in Sub1

-Include all future resources Condition: All administrative operations Actions: Action1

Sub1 contains the following alert processing rule:

Name: Rule1 Scope: Sub1 Rule type: Suppress notifications Apply the rule: On a specific time

-Start: August 10, 2022

-End: August 13, 2022

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Hot Area:

Microsoft Azure Administrator AZ-104 q6-2

Correct Answer:

Microsoft Azure Administrator AZ-104 q6-3

Explanation:

Box 1: Yes

The alert processing rule Rule1 suppresses notifications between August 10. 2022 and August 13. 2022.

However:

Suppression: This action removes all the action groups from the affected fired alerts. So, the fired alerts won\’t invoke any of their action groups, not even at the end of the maintenance window. Those fired alerts will still be visible when you list

your alerts in the portal, Azure Resource Graph, API, or PowerShell

Note: Alert processing rules allow you to apply processing on fired alerts. Alert processing rules are different from alert rules. Alert rules generate new alerts, while alert processing rules modify the fired alerts as they\’re being fired.

Use case, Suppress notifications during planned maintenance

Many customers set up a planned maintenance time for their resources, either on a one-time basis or on a regular schedule. The planned maintenance might cover a single resource, like a virtual machine, or multiple resources, like all virtual

machines in a resource group. So, you might want to stop receiving alert notifications for those resources during the maintenance window.

Box 2: No

The alert action is suppressed.

Box 3: Yes

No suppression.

Reference:

https://learn.microsoft.com/en-us/azure/azure-monitor/alerts/alerts-processing-rules

Question 7:

HOTSPOT

You deploy an Azure Kubernetes Service (AKS) cluster that has the network profile shown in the following exhibit.

Microsoft Azure Administrator AZ-104 q7

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.

Hot Area:

Microsoft Azure Administrator AZ-104 q7-2

Correct Answer:

Microsoft Azure Administrator AZ-104 q7-3

Box 1: 10.244.0.0/16

The Pod CIDR.

Note: The –pod-cidr should be a large address space that isn\’t in use elsewhere in your network environment. This range includes any on-premises network ranges if you connect, or plan to connect, your Azure virtual networks using Express

Route or a Site-to-Site VPN connection.

This address range must be large enough to accommodate the number of nodes that you expect to scale up to. You can\’t change this address range once the cluster is deployed if you need more addresses for additional nodes.

Box 2: 10.0.0.0/16

The –service-cidr is used to assign internal services in the AKS cluster an IP address.

Reference:

https://docs.microsoft.com/en-us/azure/aks/configure-kubenet

Question 8:

You have an Azure subscription named Subscription1 that is used be several departments at your company. Subscription1 contains the resources in the following table:

Microsoft Azure Administrator AZ-104 q8

Another administrator deploys a virtual machine named VM1 and an Azure Storage account named storage2 by using a single Azure Resource Manager template.

You need to view the template used for the deployment.

From which blade can you view the template that was used for the deployment?

A. RG1

B. VM1

C. Storage1

D. Container1

Correct Answer: A

1.View template from deployment history

Go to the resource group for your new resource group. Notice that the portal shows the result of the last deployment. Select this link.

2.You see a history of deployments for the group. In your case, the portal probably lists only one deployment. Select this deployment.

Microsoft Azure Administrator AZ-104 q8-2
Microsoft Azure Administrator AZ-104 q8-3

The portal displays a summary of the deployment. The summary includes the status of the deployment and its operations and the values that you provided for parameters. To see the template that you used for the deployment, select View template.

Microsoft Azure Administrator AZ-104 q8-4

References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-export- template

Question 9:

HOTSPOT

You have an Azure subscription that contains an Azure Storage account named storageaccount1.

You export storageaccount1 as an Azure Resource Manager template. The template contains the following sections.

Microsoft Azure Administrator AZ-104 q9

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point

Hot Area:

Microsoft Azure Administrator AZ-104 q9-2

Correct Answer:

Microsoft Azure Administrator AZ-104 q9-3

Reference: https://docs.microsoft.com/en-us/azure/templates/microsoft.storage/storageaccounts?tabs=json

Question 10:

You have two Azure Active Directory (Azure AD) tenants named contoso.com and fabrikam.com. You have a Microsoft account that you use to sign in to both tenants. You need to configure the default sign-in tenant for the Azure portal. What should you do?

A. From the Azure portal, change the directory.

B. From Azure Cloud Shell, run Set-AzContext.

C. From the Azure portal, configure the portal settings.

D. From Azure Cloud Shell, run Select- AzSubscription.

Correct Answer: A

Question 11:

Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.

Your company has an azure subscription that includes a storage account, a resource group, a blob container and a file share.

A colleague named Jon Ross makes use of a solitary Azure Resource Manager (ARM) template to deploy a virtual machine and an additional Azure Storage account.

You want to review the ARM template that was used by Jon Ross.

Solution: You access the Virtual Machine blade.

Does the solution meet the goal?

A. Yes

B. No

Correct Answer: B

You should use the Resource Group blade

Reference: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-export-template

Question 12:

You have an Azure subscription that contains the following storage account:

Microsoft Azure Administrator AZ-104 q12

You need 10 create a request to Microsoft Support to perform a live migration of storage1 to Zone Redundant Storage (ZRS) replication. How should you modify storage1 before the Live migration?

A. Set the replication to Locally-redundant storage (IRS)

B. Disable Advanced threat protection

C. Remove the lock

D. Set the access tier to Hot

Correct Answer: A

If you want to live migration from RA-GRS to ZRS, at first you have to Switch the storage tier to LRS and then only you can request a live migration.

Microsoft Azure Administrator AZ-104 q12-2

Reference: https://docs.microsoft.com/en-us/azure/storage/common/redundancy-migration?toc=%2Fazure%2Fstorage%2Fblobs%2Ftoc.jsonandtabs=portal

Question 13:

You create an Azure subscription named Subscription1 and an associated Azure Active Directory (Azure AD) tenant named Tenant1. Tenant1 contains the users in the following table.

Microsoft Azure Administrator AZ-104 q13

You need to add an Azure AD Privileged Identity Management application to Tenant1. Which account can you use?

A. [email protected]

B. [email protected]

C. [email protected]

D. [email protected]

Correct Answer: B

For Azure AD roles in Privileged Identity Management, only a user who is in the Privileged role administrator or Global administrator role can manage assignments for other administrators. You can grant access to other administrators to manage Privileged Identity Management. Global Administrators, Security Administrators, Global readers, and Security Readers can also view assignments to Azure AD roles in Privileged Identity Management. Only owner can create an subscription and only global administrator can perform Privileged Identity Management changes. So you can create subscription with external user and then promote him to global administrator to get things done. As it is mentioned as it is associated with azure tenant so that tenant has an AD domain. So in azure AD the default domain ends with onmicrosoft.com. So you can\’t have Hotmail IDs there. Moreover always remember the principle of least privileges, when you can get your job done with Global Administrator then you should not look for owner for security purpose. [email protected] : Correct Choice As Admin1 is Global Administrator and part of default AD domain so Admin1 can add an Azure AD Privileged Identity Management application to Tenant1 [email protected] : Incorrect Choice As per the above explanation Admin3 is not Global Administrator, so this option is incorrect. [email protected] : Incorrect Choice As per the above explanation Admin2 is not Global Administrator, so this option is incorrect. [email protected] : Incorrect Choice Although this user is Global Administrator but referring to the least privileges principal and default domain consideration this option is incorrect.

References: https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-getting-started https://docs.microsoft.com/en-us/azure/active-directory-domain-services/tutorial-create-instance

Question 14:

You create the following resources in an subscription:

1.An Azure Container Registry instance named Registry1

2.An Azure Kubernetes Service (AKS) cluster named Cluster1

You create a container image named App 1 on your administrative workstation.

You need to deploy App1 to cluster 1.

What should you do first?

A. Run the aa aks create command.

B. Create a host pool on Cluster1.

C. Upload App1 to Registry 1.

D. Run the kubect1 apply command.

Correct Answer: C

Question 15:

You have an Azure subscription named Subscription1 that has the following providers registered:

1.Authorization

2.Automation

3.Resources

4.Compute

5.KeyVault

6.Network

7.Storage

8.Billing

9.Web

Subscription1 contains an Azure virtual machine named VM1 that has the following configurations:

1.Private IP address: 10.0.0.4 (dynamic)

2.Network security group (NSG): NSG1

3.Public IP address: None

4.Availability set: AVSet

5.Subnet: 10.0.0.0/24

6.Managed disks: No

7.Location: East US

You need to record all the successful and failed connection attempts to VM1.

Which three actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

A. Register the Microsoft.Insights resource provider

B. Add an Azure Network Watcher connection monitor

C. Register the Microsoft.LogAnalytics provider

D. Enable Azure Network Watcher in the East US Azure region

E. Create an Azure Storage account

F. Enable Azure Network Watcher flow logs

Correct Answer: ADE

NSG flow log data is written to an Azure Storage account. You need to create an Azure Storage account, With an Azure Storage account NSG flow logs can be enabled.

Enable network watcher in the East US region.

NSG flow logging requires the Microsoft.Insights provider.

References:

https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-nsg-flow-logging-portal

More ……Microsoft exam.

Study smart: effective and authentic AZ-104 resources (continue)

In order to respect your preferences, we have prepared a variety of Microsoft Azure Administrator AZ-104 learning materials (free and from the official one) to ensure that they are authentic and effective.

If you prefer video mode, check it out below
AZ-104 Exam Preparation Videos (of five):

https://learn.microsoft.com/en-us/shows/exam-readiness-zone/preparing-for-az-104-manage-azure-identities-and-governance-1-of-5
https://learn.microsoft.com/en-us/shows/exam-readiness-zone/preparing-for-az-104-implement-and-manage-storage-2-of-5
https://learn.microsoft.com/en-us/shows/exam-readiness-zone/preparing-for-az-104-deploy-and-manage-azure-compute-resources-3-of-5
https://learn.microsoft.com/en-us/shows/exam-readiness-zone/preparing-for-az-104-configure-and-manage-virtual-networking-4-of-5
https://learn.microsoft.com/en-us/shows/exam-readiness-zone/preparing-for-az-104-monitor-and-maintain-azure-resources-5-of-5

If you prefer the online practice mode, please take the free practice assessment (Microsoft official) https://login.microsoftonline.com/

If you like the kind of instructor-led courses, check it out here

https://learn.microsoft.com/en-us/training/courses/az-104t00

As you can see, the authentic Microsoft Azure Administrator AZ-104 dumps help you pass the exam. Download the authentic Microsoft of Azure Administrator AZ-104 dumps for new practice questions https://www.pass4itsure.com/az-104.html PDF or VCE.

Keep in mind that success on the AZ-104 exam ultimately depends on a combination of authentic Microsoft Azure Administrator AZ-104 dumps, practice tests, and hands-on experience with Microsoft Azure.

You may also like