300-420 ENSLD exam solutions and how to succeed with 300-420 dumps

Pass4itsure 300-420 dumps is 300-420 ENSLD exam solutions

Pass4itsure 300-420 dumps Participate in the actual scene verification, it is really effective 300-420 ENSLD exam solutions!

How does Pass4itsure 300-420 dumps help you pass the 300-420 ENSLD exam successfully:

  1. Cisco 300-420 ENSLD exam questions are edited, reviewed, corrected by Pass4itsure Cisco professional team
  2. 10+ years of exam experience
  3. 99%+ exam success rate
  4. PDF+VCE Exam Practice Too

Now, candidates only need to download 300-420 dumps: https://www.pass4itsure.com/300-420.html, get 260 latest exam questions and answers, this is the latest 300-420 ENSLD exam solutions!

Practice the new Cisco 300-420 dumps exam questions online:

FromNumber of exam questionsPriceAssociated certifications
Pass4itsure15/260FreeCCNP Enterprise

Question 1:

DRAG DROP

Drag and drop the characteristics from the left onto the configuration protocols they describe on the right.

Select and Place:

new Cisco 300-420 dumps exam questions 1

Correct Answer:

new Cisco 300-420 dumps exam questions 1-1

Question 2:

Which design element should an engineer consider when multicast is included in a Cisco SD-Access architecture?

A. PIM SSM must run in the underlay.

B. Multicast clients reside in the underlay, and the multicast source is outside the fabric or in the overlay.

C. Rendezvous points must be used in a PIM SSM deployment.

D. Multicast traffic is transported in the overlay and the EID space for wired and wireless clients.

Correct Answer: D

Multicast traffic is transported in the overlay, in the EID space, for both wired and wireless clients https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKEWN-2020.pdf https://www.cisco.com/c/dam/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/deploy-guide/cisco-dna-center-sd-access-wl-dg.pdf

Question 3:

An architect is creating a migration strategy for a large organization in which the choice made by the application between IPv6 and IPv4 is based on the DNS request. Which migration strategy does the architect choose?

A. AFT for public web presence

B. host-initiated tunnels

C. dual stack

D. site-to-site IPv6 over IPv4 tunnels

Correct Answer: C

Question 4:

An organization plans to deploy multicast across two different autonomous systems. Their solution must allow RPs to:

1.

discover active sources outside their domain

2.

use the underlying routing information for connectivity with other RPs

3.

announce sources joining the group

Which solution supports these requirements?

A. SSM

B. MSDP

C. PIM-DM

D. PIM-SM

Correct Answer: B

Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-10/configuration_guide/ip_mcast_rtng/b_1610_ip_mcast_rtng_9500_cg/b_1610_ip_mcast_rtng_9500_cg_chapter_010001.pdf

Question 5:

An existing network solution is using BFD in echo mode. Several of the network devices are experiencing high CPU utilization which an engineer has determined is related to the BFD feature. Which solution should the engineer leverage to reduce the CPU load?

A. Implement slow timers between peers with low CPU resources.

B. Implement BED asynchronous mode between peers with low CPU resources.

C. Enable BFD multi-hop on the devices with low CPU resources.

D. Utilize carrier delay on all routers in the network.

Correct Answer: A

Question 6:

An engineer must design a multicast network for a financial application. Most of the multicast sources also receive multicast traffic (many-to-many deployment model). To better scale routing tables, the design must not use source trees. Which multicast protocol satisfies these requirements?

A. PIM-SSM

B. PIM-SM

C. MSDP

D. BIDIR-PIM

Correct Answer: D

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-tech-oview.html

Bidir-PIM is designed to be used for many-to-many applications within individual PIM domains. Multicast groups in bidirectional PIM mode can scale to an arbitrary number of sources without incurring overhead due to the number of sources.

Question 7:

Which two functions are provided by the Cisco SD-WAN orchestration plane? (Choose two.)

A. centralized provisioning

B. primary authentication point

C. NAT traversal facilitation

D. Zero Touch Provisioning

E. troubleshooting and monitoring

Correct Answer: BC

Question 8:

An engineer is designing an enterprise campus network. The LAN infrastructure consists of switches from multiple vendors, and Spanning Tree must be used as a Layer 2 loop prevention mechanism. All configured VLANs must be grouped in two SIP instances.

Which standards-based Spanning Tree technology supports this design solution?

A. MSTP

B. RSTP

C. Rapid PVST

D. STP

Correct Answer: A

Question 9:

A company uses cloud-based applications for voice and video calls, file sharing, content sharing, and messaging. During business hours, these applications randomly become slow and unresponsive. However, other applications work smoothly with the current applied QoS polices. Which solution must the company choose to resolve the issue?

A. Identify the applications with NBAR2 and allocate the required bandwidth accordingly.

B. Identify the port used by each application and apply a minimum bandwidth guarantee.

C. Identify the applications and reserve the required bandwidth on the perimeter routers.

D. Identify the application ports, create groupings, and rate-limit the required bandwidth.

Correct Answer: A

Explanation: using NBAR to identify application and bandwidth usage, then adjust existing QoS polices would be a more simple option. Of course, B is still ok if the network admin know all traffic and bandwidth consumption by other tools, say netflow. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_nbar/configuration/15-mt/qos-nbar- 15-mt-book/nbar-protocl-discvry.html#GUID-ED1AEDA1-AE69-45C3-A77E- 2AF881CA9C36 https://www.cisco.com/c/en/us/products/ios-nx-os-software/network-based-application- recognition-nbar/index.html

Question 10:

How is sub-second failure of a transport link detected in a Cisco SD-WAN network?

A. Hellos are sent between the WAN Edge routers and the vSmart controller.

B. BFD runs on the IPsec tunnels between WAN Edge routers.

C. BGP is used between WAN Edge routers and the vSmart controller.

D. Link state change messages are sent between vSmart controllers.

Correct Answer: B

Question 11:

In a cisco SD-Access brownfield deployment scenario, which configuration deployment must be taken with Cisco DNA center?

A. Subnet stretching

B. LAN automation

C. Automated UNDERLAY

D. Manual underlay

Correct Answer: B

Question 12:

What is the role of a control-plane node in a Cisco SD-Access architecture?

A. fabric device that connects wired endpoints to the SD-Access fabric

B. map system that manages endpoint to device relationships

C. fabric device that connects APs and wireless endpoints to the SD-Access fabric

D. map system that manages External Layer 3 networks

Correct Answer: B

Reference: https://netaavi.com/my-blog-1/f/overview-of-sda-fabric-solution

Question 13:

Which two steps can be taken to improve convergence in an OSPF network? (Choose two.)

A. Use Bidirectional Forwarding Detection

B. Merge all the areas into one backbone area

C. Tune OSPF parameters

D. Make all non-backbone areas stub areas

E. Span the same IP network across multiple areas.

Correct Answer: AC

Question 14:

Which type of rendezvous point deployment is standards-based and support dynamic RP discovery?

A. Auto-RP

B. Anycast-RP

C. bootstrap router

D. static RP

Correct Answer: C

Question 15:

What is the purpose of a control plane node in a Cisco SD-Access network fabric?

A. to maintain the endpoint database and mapping between endpoints and edge nodes

B. to detect endpoints in the fabric and inform the host tracking database of EID-to-fabric-edge node bindings

C. to identify and authenticate endpoints within the network fabric

D. to act as the network gateway between the network fabric and outside networks

Correct Answer: A

https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html


The 300-420 dumps provided by Pass4itsure are really effective 300-420 ENSLD exam solutions!

Candidates can rest assured to use Pass4itsure 300-420 dumps to help them succeed in the exam! It contains 260 latest exam questions and answers, verified by a team of experts to verify the real and effective materials that have actually been reviewed, and fully meet the success conditions of the 300-420 ENSLD exam.

Continue Reading

300-420 Dumps [Update]Most Useful Designing Cisco Enterprise Networks Online Resource

The only unavoidable online resource for successfully passing the Cisco Designing Cisco Enterprise Networks exam is the 300-420 dumps. Exactly, the updated 300-420 dumps are the most efficient online resource for you to learn Cisco Designing Cisco Enterprise Networks.

Pass4itSure updated 300-420 dumps, you need to enter https://www.pass4itsure.com/300-420.html the entry page will see 184 practice questions and answers, presented in PDF files and VCE online simulations, forming a reliable 300-420 dumps practice that is the best online resource to ensure you can pass the 300-420 (ENSLD) exam.

Choosing the right Cisco CCNP 300-420 dumps of online resources is the first shot to successfully launch the Designing Cisco Enterprise Networks exam.

What do you need to know most about the 300-420 exam?

Pick out the key points and talk about the next 300-420 exam

CCNP Designing Cisco Enterprise Networks

Vendor: Cisco
Exam Code: 300-420
Exam Name: Designing Cisco Enterprise Networks (ENSLD)
Certification: CCNP
Duration: 90 minutes
Languages: English and Japanese
Price: $300 USD

The Cisco 300-420 ENSLD exam is one of the CCNP Enterprise certification intensive exams (300-410 ENARSI, 300-415 ENSDWI, 300-420 ENSLD, 300-425 ENWLSD, 300-430 ENWLSI, 300-435 ENAUTO). Passing the Cisco 300-420 ENSLD exam is also required to pass the core exam – 350-401 ENCOR in order for you to receive the CCNP Enterprise certification.

Speaking of CCNP Enterprise Certification, let me just say what are the points to note?

  • There are no formal prerequisites, but you should have a good understanding of the exam topics before taking the exam.
  • Candidates need to have three to five years of experience implementing enterprise networking solutions.

Some resource links to share:

CCNP Enterprise At-a-glance

Frequently asked questions

Legacy CCNP migration tools

Practice Cisco (ENSLD) 300-420 Free Dumps First:

QUESTION 1

Which design consideration should be observed when EIGRP is configured on Data Center switches?

A. Perform manual summarization on all Layer 3 interfaces to minimize the size of the routing table.
B. Prevent unnecessary EIGRP neighborships from forming across switch virtual interfaces.
C. Lower EIGRP hello and hold timers to their minimum settings to ensure rapid route reconvergence.
D. Configure multiple EIGRP autonomous systems to segment Data Center services and applications.

Correct Answer: A

QUESTION 2

Which two routing protocols allow for unequal cost load balancing? (Choose two.)

A. EIGRP
B. IS-IS
C. BGP
D. OSPF
E. RIPng

Correct Answer: AC

QUESTION 3

An ISP provides Layer 3 VPN service over MPLS to a customer with four branches and multiple CE routers at each
branch. To exchange the routes that are learned from the CE routers, which BGP address family should the ISP activate
among the PE routers?

A. address-family multicast
B. L2VPN EVPN
C. VPNv4 unicast
D. IPv4 unicast

Correct Answer: C

QUESTION 4

An engineer must design a solution to connect a customer to the Internet. The solution will include a Layer 3 circuit with a CIR of 50 Mbps from the service provider. The hand-off from the provider\’s switch to the customer\’s router is 1Gbps. Which solution should the engineer include to prevent potential issues with choppy voice traffic?

A. Reduce the bandwidth of the connection to the router.
B. Implement hierarchical QoS with a parent policing policy.
C. Implement hierarchical QoS with a parent shaping policy.
D. Add a bandwidth statement to the router interface.

Correct Answer: C

QUESTION 5

Which two functions are provided by the Cisco SD-WAN orchestration plane? (Choose two.)

A. centralized provisioning
B. primary authentication point
C. NAT traversal facilitation
D. Zero Touch Provisioning
E. troubleshooting and monitoring

Correct Answer: BC

QUESTION 6

DRAG DROP
Drag and drop the characteristics from the left onto the Yang model they describe on the right.
Select and Place:

QUESTION 7

The customer solution requires QoS to support streaming multimedia over a WAN. An architect chooses to use Per-Hop
Behavior. Which solution should the engineer use to classify and mark traffic traveling between branch sites?

A. CBWFQ with DSCP AF2
B. LLQ with DSCP EF
C. CBWFQ with DSCP AF3
D. LLQ with DSCP AF4

Correct Answer: B

QUESTION 8

In the SD-WAN underlay network, which WAN Edge VPN ID is defined as the transport VPN and is used to carry control
traffic?

A. VPN 0
B. VPN 512
C. VPN 128
D. VPN 256

Correct Answer: A

QUESTION 9

An architect is creating a migration strategy for a large organization in which the choice made by the application
between IPv6 and IPv4 is based on the DNS request. Which migration strategy does the architect choose?

A. AFT for public web presence
B. host-initiated tunnels
C. dual stack
D. site-to-site IPv6 over IPv4 tunnels

Correct Answer: C

QUESTION 10

Which nonproprietary mechanism can be used to automate rendezvous point distribution in a large PIM domain?

A. Embedded RP
B. BSR
C. Auto-RP
D. Static RP

Correct Answer: B


QUESTION 11

An architect must address sustained congestion on the access and distribution uplink of network. QoS has already been
implemented and optimized, but it is no longer effective in ensuring optimal network performance. Which two solutions
should the architect use to improver network performance. (Choose two)

A. Reconfigure QoS based on the IntServ model
B. Utilize random early detection to manage queues
C. Implement higher-speed uplink interfaces
D. Bundle additional uplinks into logical EtherChannels
E. Configure selective packet discard to drop noncritical network traffic.

Correct Answer: BE

QUESTION 12

Refer to the exhibit.

A customer is running HSRP on the core routers. Over time the company has grown and requires more network
capacity. In the current environment, some of the downstream interfaces are almost fully utilized, but others are not.
Which solution improves the situation?

A. Make router R2 active for half of the VLANs.
B. Add more interfaces to R1 and R2.
C. Configure port channel toward downstream switches.
D. Enable RSTP on the downstream switches.

Correct Answer: A

QUESTION 13

What are two benefits of designing an SD-WAN network fabric with direct Internet access implemented at every site?
(Choose two.)

A. It decreases latency to applications hosted by public cloud service provider.
B. It decreases latency on Internet circuits.
C. It increases the speed of delivery of site deployments through zero-touch provisioning.
D. It increases the total available bandwidth on Internet circuits.
E. It alleviates network traffic on MPLS circuits.

Correct Answer: AE

Want to continue? Click here for more exam questions.

Designing Cisco Enterprise Networks 300-420 Free Dumps PDF Online Download: https://drive.google.com/file/d/1Gkhs1fAjdAInIbvtgyNGznqIzNuAVKZZ/view?usp=sharing

Continue Reading

Top Tips To Pass 300-420 Exam – Updated Cisco 300-420 Exam Dumps

pass4itsure.com

Of course, you are here to pass the Cisco 300-420 certification exam. Always remember this important Cisco 300-420 exam preparation step: You must spend a special time studying, but if you do not use Pass4itsure Cisco 300-420 practice materials, your preparation will be incomplete. If you are using Pass4itsure Cisco 300-420 dumps, you will be 100% successful.

Pass4itsure

Updated Cisco 300-420 Dumps – Pass Exam with Ease

To help everyone, our experts have prepared effective and updated Cisco 300-420 exam dumps practice questions, aiming to pass the challenging Cisco 300-420 certification.


Please rest assured that our study materials will be updated with the update of the exam to ensure the latest!

Use Cisco 300-420 Dumps To Practice Your Skills And Expertise

Effective, updated, and error-free Cisco 300-420 exam dumps practice questions

For your convenience, Pass4itsure provide three formats:

1.PDF

2.Software

3.Software + PDF

Each format is friendly. After choosing the required Cisco 300-420 format, you can easily learn.

Pass4itsure dumps

Pass4itsure 300-420 Exam Dumps Questions Answers
Vendor: Cisco
Certifications: CCNP
Exam Code: 300-420
Exam Name: Designing Cisco Enterprise Networks (ENSLD)
Update throughout the year
Q&As: 97

Best Features Of Cisco 300-420 PDF

  • Cisco 300-420 dumps pdf is great for tablets and mobile devices.
  • Cisco 300-420 pdf can work without installation.
  • Cisco 300-420 pdf questions are updated regularly so you don’t miss a single topic.

Best Features of Cisco 300-420 Practice Exam Software

  • Provide free updates
  • Self-evaluation function of Cisco 300-420 software practice exam
  • Pass4itsure Cisco experts from all over the world are dedicated to the research and development of this product

It is important to complete the exam preparation before the Cisco 300-420 exam. After purchasing the Cisco 300-420 practice questions, you will get 365 days of updates. Therefore, you should not worry about changes in the syllabus.

If you are using the Pass4itsure 300-420 practice test, you will have the opportunity to practice difficult questions.

  1. It will increase your experience and skills.
  2. You will get a first attempt to pass the Cisco 300-420 certification exam. Therefore, you will be able to save your time and money.

For more free practice tests, please click: [2021.3] Cisco 300-420 practice test free https://www.exampass.net/prep-actual-cisco-300-420-exam-questions-for-free-share.html
[2021.6] Cisco 300-420 practice test free https://www.exampass.net/update-prep-actual-cisco-300-420-exam-questions-for-free-share.html

Cisco CCNP Certification contains multiple exams, of which Cisco 300-410 is one of them, you can click here to view https://www.pass4cert.net/top-tips-to-pass-300-410-exam-updated-cisco-300-410-exam-dumps.html 300-410 dumps.

Why Do You Need Cisco 300-420 Dumps To Be Successful?

The Cisco 300-420 exam is different from other exams you take. Remember, the main purpose of these Cisco 300-420 tests is to assess the knowledge you use or need at work. You will need our Cisco 300-420 dumps practice exam to understand the Cisco 300-420 exam.

The Cisco 300-420 exam is really hard to pass. In order to be successful, you must be prepared for serious things. If you want to maximize your learning experience, please prepare for Cisco 300-420 certification with the help of Pass4itsure Cisco 300-420 dumps.

Tips to Pass 300-420 Exam

Learning method refers to the way in which candidates recognize how to learn in the best way. After choosing the best study strategy for the Cisco 300-420 exam, you will easily understand all the important concepts. Pass4itsure dumps questions will help you better understand each concept. You will get Cisco 300-420 practice test questions to improve your experience and skills for the Cisco 300-420 exam certification.

Get 15% Discount On Cisco 300-420 Dumps

Pass4itsure Cisco dumps discount code
Continue Reading