3Com 3M0-211 Cert, Sale Latest 3Com 3M0-211 Certification Exams With New Discount

Attention Please:Professional new version 3Com 3M0-211 PDF and VCE dumps can now free download on Flydumps.com,all are updated timely by our experts covering all 3Com 3M0-211 new questions and questions.100 percent pass your exam.

QUESTION 41
Which three are Multilayer Giabit Software features of the Switch 40×0 Family? (Choose three)
Actualtests.com – The Power of Knowing
A. Supports RIP, RIP2 and ODPF
B. Protocol-based VLAN support
C. Link Aggregation and Resilient Links support
D. IP unicast routing with up to 256 router interfaces
E. Routed Access Control Lists based on application filtering
F. Multicast filtering with internet Group Multicast Protocol (IGMP) snooping and IGMP querier

Correct Answer: ACF
QUESTION 42
Which three are Smart IP Switch 40×0 family features? (Choose three)
A. Switch can function as a DHCP or BootP server
B. Supports both manual and automatic IP configuration
C. Uses SNMP trap to verify the availability of IP address pool.
D. Can select a random IP address from default assress range
E. Can receive an IP address from either a DHCP or BootP server
F. Network manager must release any automatically assigned address before the switch can be manually configured

Correct Answer: BDE
QUESTION 43
Which component of XRN technology is defined as: “An advanced routing implementation that allows multiple interconnected switches in an XRN solution to behave as a single active routing entity”?
A. XRN Interconnect
B. XRN Distributed Fabric
C. Distributed Link Aggregation (DLA)
D. Distributed Resilient Routing (DDR)
E. Distributed Device Management (DDM)
Correct Answer: D
QUESTION 44
Which two are valid XRN Fabric configurations? (Choose two)
A. Switch 4050 and Switch 4070
B. Switch 4060 and SuperStack 3 Switch 4950
C. Switch 4007 and SuperStack 3 Switch 4400
D. SuperStack 3 Switch 4400 and SuperStack 3 Switch 4900
E. Switch 4050 and Switch 4060,Swicth 4070 and SuperStack 3 Switch 4900

Correct Answer: AB
QUESTION 45
Which two 3Com switch families can currently be used to create an XRN Distributed Fabric (DF)? (Choose two)
A. 3Com Swicth 40×0 family
B. 3Com Swicth 4005 family
C. 3Com Swicth 4007 family
D. SuperStack 3 Swicth 4400 family
E. SuperStack 3 Swicth 4900 family

Correct Answer: AE
QUESTION 46
Which two components are required to create a geographically distributed XRN solution (excluding the appropriate 3Com switches)?(Choose two)
A. 4-port GBIC module
B. 3Com Network Supervisor
C. XRN Fabric Interconnect Modules
D. High-Bandwidth Interconnect Cable
E. Gigabit Multilayer Switching Software V4.X

Correct Answer: AE
QUESTION 47
What is minimum requirement to support the Resilient IP address feature of the SuperStack 3 Switch 4400?
A. Nothing – it is support by every switch
B. At least two switches must be stacked together
C. All the switches in a stack must have their own IP address
D. At least two switches in a stack, and both switches must have an IP address
Correct Answer: D
QUESTION 48
What is the procedure for upgrading a SuperStack 3 Switch 4400 SE to the enhanced switch feature set?
A. Enter the software upgrade code obtained from 3Com and reboot the switch
B. Copy the 3Com upgrade file to TFTP server on the same subnet as the switch, start the TFTP server and configure the switch, reboot the switch when the Power LED stops flashing
C. Copy the 3Com upgrade file to a TFTP server on the same network as the switch, start the TFTP server and configure the switch reboot the switch when the Power LED stops Actualtests.com – The Power of Knowing flashing
D. Purchase and obtain activation key for the Switch 4400 Enhanced Software Upgrade from 3Com using Command Line Interface (CLI) entry “system license add” enter activation key confirm.
Correct Answer: D
QUESTION 49
Which three Physical Layer components should you check when either the Switch 7700 or Switch 8800 is having a connection problem? (Choose three)
A. Link LEDs
B. Switch ARP tables
C. Switch VLAN assignments
D. MAC address for the link
E. RX error statistics for link
F. Link Speed, duplex mode and flow control

Correct Answer: AEF
QUESTION 50
Which three may be the cause of a Switch 7700 Network Layer 3 problem? (Choose three)
A. The switch trunk ports are not properly configured
B. The RIP versions are not the same between switches
C. The switches is not sending and receiving rout ipdates
D. Spanning Tree Protocol (STP) is disabled on the switch
E. The MAC address table “aging parameter” is set too high
F. Virtual Router Redundancy Protocol (VRRP) is not properly configured on the switch

Correct Answer: BCF
QUESTION 51
Which Switch 7700 command shows the prority used for input/output packet operations?
A. display priority-trust
B. display qos-interface all
C. display qos-interface traffic-priority
D. display qos-interface traffic-statistics

Correct Answer: A
QUESTION 52
Which three can be used to download a configuration fole on the Switch 7700?
Actualtests.com – The Power of Knowing
(Choose three)
A. Use IP PROTOCOL
B. Use FTP protocol
C. Use TFTP protocol
D. Use HTTP protocol
E. Use XMODEM protocol
F. Use the system “dump” command
Correct Answer: BCE
QUESTION 53
Which two are syslog features/ functions on the Switch 7700 and Switch 8800? (Choose two)
A. Responsible for all system information on output
B. By default, the syslog automatically clears its file every 30 days
C. Is divided into eight levels, which can be filtered based on a level
D. Serves as an information center of the system’s software modules
E. Can be dumped to aconsole, monitor, SQL database or ASCII text file

Correct Answer: CD
QUESTION 54
Which four are Link Aggregation features/functions on the Switch 7700? (Choose four)
A. The switch supports the IEEE 802.3ad standard
B. Link Aggregation ports must be consecutive switch ports
C. Link Aggregation ports should be set to TRUNK or HYBRID
D. Use the “display interface” command to see all ports within a group
E. Use the “display link-aggregation” command to see all ports within a group
F. A Link Aggregation port should be set to “access” if more than one VLAN is supported on the link

Correct Answer: BCDF

Preparing 3Com 3M0-211 exam is not difficult now.You can prepare from 3Com 3M0-211 Certification or 3Com 3M0-211 dumps.Here we have mentioned some sample questions.You can use our 3Com 3M0-211 study material notes for test preparation. Latest 3Com 3M0-211 study material available.

You may also like