300-420 Dumps [Update]Most Useful Designing Cisco Enterprise Networks Online Resource

The only unavoidable online resource for successfully passing the Cisco Designing Cisco Enterprise Networks exam is the 300-420 dumps. Exactly, the updated 300-420 dumps are the most efficient online resource for you to learn Cisco Designing Cisco Enterprise Networks.

Pass4itSure updated 300-420 dumps, you need to enter https://www.pass4itsure.com/300-420.html the entry page will see 184 practice questions and answers, presented in PDF files and VCE online simulations, forming a reliable 300-420 dumps practice that is the best online resource to ensure you can pass the 300-420 (ENSLD) exam.

Choosing the right Cisco CCNP 300-420 dumps of online resources is the first shot to successfully launch the Designing Cisco Enterprise Networks exam.

What do you need to know most about the 300-420 exam?

Pick out the key points and talk about the next 300-420 exam

CCNP Designing Cisco Enterprise Networks

Vendor: Cisco
Exam Code: 300-420
Exam Name: Designing Cisco Enterprise Networks (ENSLD)
Certification: CCNP
Duration: 90 minutes
Languages: English and Japanese
Price: $300 USD

The Cisco 300-420 ENSLD exam is one of the CCNP Enterprise certification intensive exams (300-410 ENARSI, 300-415 ENSDWI, 300-420 ENSLD, 300-425 ENWLSD, 300-430 ENWLSI, 300-435 ENAUTO). Passing the Cisco 300-420 ENSLD exam is also required to pass the core exam – 350-401 ENCOR in order for you to receive the CCNP Enterprise certification.

Speaking of CCNP Enterprise Certification, let me just say what are the points to note?

  • There are no formal prerequisites, but you should have a good understanding of the exam topics before taking the exam.
  • Candidates need to have three to five years of experience implementing enterprise networking solutions.

Some resource links to share:

CCNP Enterprise At-a-glance

Frequently asked questions

Legacy CCNP migration tools

Practice Cisco (ENSLD) 300-420 Free Dumps First:

QUESTION 1

Which design consideration should be observed when EIGRP is configured on Data Center switches?

A. Perform manual summarization on all Layer 3 interfaces to minimize the size of the routing table.
B. Prevent unnecessary EIGRP neighborships from forming across switch virtual interfaces.
C. Lower EIGRP hello and hold timers to their minimum settings to ensure rapid route reconvergence.
D. Configure multiple EIGRP autonomous systems to segment Data Center services and applications.

Correct Answer: A

QUESTION 2

Which two routing protocols allow for unequal cost load balancing? (Choose two.)

A. EIGRP
B. IS-IS
C. BGP
D. OSPF
E. RIPng

Correct Answer: AC

QUESTION 3

An ISP provides Layer 3 VPN service over MPLS to a customer with four branches and multiple CE routers at each
branch. To exchange the routes that are learned from the CE routers, which BGP address family should the ISP activate
among the PE routers?

A. address-family multicast
B. L2VPN EVPN
C. VPNv4 unicast
D. IPv4 unicast

Correct Answer: C

QUESTION 4

An engineer must design a solution to connect a customer to the Internet. The solution will include a Layer 3 circuit with a CIR of 50 Mbps from the service provider. The hand-off from the provider\’s switch to the customer\’s router is 1Gbps. Which solution should the engineer include to prevent potential issues with choppy voice traffic?

A. Reduce the bandwidth of the connection to the router.
B. Implement hierarchical QoS with a parent policing policy.
C. Implement hierarchical QoS with a parent shaping policy.
D. Add a bandwidth statement to the router interface.

Correct Answer: C

QUESTION 5

Which two functions are provided by the Cisco SD-WAN orchestration plane? (Choose two.)

A. centralized provisioning
B. primary authentication point
C. NAT traversal facilitation
D. Zero Touch Provisioning
E. troubleshooting and monitoring

Correct Answer: BC

QUESTION 6

DRAG DROP
Drag and drop the characteristics from the left onto the Yang model they describe on the right.
Select and Place:

QUESTION 7

The customer solution requires QoS to support streaming multimedia over a WAN. An architect chooses to use Per-Hop
Behavior. Which solution should the engineer use to classify and mark traffic traveling between branch sites?

A. CBWFQ with DSCP AF2
B. LLQ with DSCP EF
C. CBWFQ with DSCP AF3
D. LLQ with DSCP AF4

Correct Answer: B

QUESTION 8

In the SD-WAN underlay network, which WAN Edge VPN ID is defined as the transport VPN and is used to carry control
traffic?

A. VPN 0
B. VPN 512
C. VPN 128
D. VPN 256

Correct Answer: A

QUESTION 9

An architect is creating a migration strategy for a large organization in which the choice made by the application
between IPv6 and IPv4 is based on the DNS request. Which migration strategy does the architect choose?

A. AFT for public web presence
B. host-initiated tunnels
C. dual stack
D. site-to-site IPv6 over IPv4 tunnels

Correct Answer: C

QUESTION 10

Which nonproprietary mechanism can be used to automate rendezvous point distribution in a large PIM domain?

A. Embedded RP
B. BSR
C. Auto-RP
D. Static RP

Correct Answer: B


QUESTION 11

An architect must address sustained congestion on the access and distribution uplink of network. QoS has already been
implemented and optimized, but it is no longer effective in ensuring optimal network performance. Which two solutions
should the architect use to improver network performance. (Choose two)

A. Reconfigure QoS based on the IntServ model
B. Utilize random early detection to manage queues
C. Implement higher-speed uplink interfaces
D. Bundle additional uplinks into logical EtherChannels
E. Configure selective packet discard to drop noncritical network traffic.

Correct Answer: BE

QUESTION 12

Refer to the exhibit.

A customer is running HSRP on the core routers. Over time the company has grown and requires more network
capacity. In the current environment, some of the downstream interfaces are almost fully utilized, but others are not.
Which solution improves the situation?

A. Make router R2 active for half of the VLANs.
B. Add more interfaces to R1 and R2.
C. Configure port channel toward downstream switches.
D. Enable RSTP on the downstream switches.

Correct Answer: A

QUESTION 13

What are two benefits of designing an SD-WAN network fabric with direct Internet access implemented at every site?
(Choose two.)

A. It decreases latency to applications hosted by public cloud service provider.
B. It decreases latency on Internet circuits.
C. It increases the speed of delivery of site deployments through zero-touch provisioning.
D. It increases the total available bandwidth on Internet circuits.
E. It alleviates network traffic on MPLS circuits.

Correct Answer: AE

Want to continue? Click here for more exam questions.

Designing Cisco Enterprise Networks 300-420 Free Dumps PDF Online Download: https://drive.google.com/file/d/1Gkhs1fAjdAInIbvtgyNGznqIzNuAVKZZ/view?usp=sharing

You may also like