Cisco 642-427 Cert, First-hand Cisco 642-427 Study Material For Download

ATTENTION: Get your Cisco 642-427 certification easily with,Flydumps latest Cisco 642-427 exam dumps. All the up-to-date questions and answers were added to the new version.Go to the site Flydumps.com to get more Cisco 642-427 exam
information.

QUESTION 1
Where does an IP phone obtain the extension number and speed-dial settings from?
A. the settings that are configured on the physical phone
B. the registration file that the phone receives from the Cisco Unified Communications Manager
C. the device and line configuration in Cisco Unified Communications Manager, during the registration process
D. the default device profile that is configured in Cisco Unified Communications, Manager

Correct Answer: C QUESTION 2
Which web-based application that is accessed via the Cisco Unified Communications Manager Administration GUI generates reports for troubleshooting or inspecting cluster data?
A. Cisco Unified Serviceability alarms
B. Cisco Unified RTMT Trace and Log Central
C. Cisco Unified RTMT Monitor
D. Cisco Unified Reporting tool

Correct Answer: D QUESTION 3
Which statement about device mobility is true?
A. When local route groups are used, there is no need to configure device mobility groups or phone device CSSs as long as phone line CSSs are used.
B. When local route groups are used, you must configure device mobility groups and phone device CSSs.
C. When the device mobility group at the home device pool and roaming device pool are not the same, the Phone will keep the home region.
D. When device mobility groups at the home device pool and roaming device pool are the same, the phone will keep the home MRGL setting. Correct Answer: A QUESTION 4
Refer to the SDI trace in the exhibit A PSTN call arrived at the MGCP gateway that is shown in the SDI trace. If the caller ID that is displayed on the IP phone is 087071 222 and the HQ_clng pty_CSS contains the HQ_cing_pty_Pt partition, which exhibit shows the correct gateway digit manipulation”?

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Correct Answer: D

QUESTION 5
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)
A. Cisco Unified Communications Manager RTMT tool
B. Cisco Unified Communications Manager Serviceability interface
C. Cisco Unified Reporting
D. Cisco Unified Communications Manager CLI interface
E. Cisco IP Phone Device Stats from the Settings button
F. Cisco Unified OS Administration interface
Correct Answer: ACD

QUESTION 6
Which of these reasons can cause intrasite calls within a Cisco Unified Communications Manager cluster to fail?
A. The route partition that is configured in the CCD requesting service is not listed in the calling phone CSS
B. The trunk CSS does not include the partition for the called directory number.
C. The MGCP gateway is not registered
D. The calling phone does not have the correct CSS configured
E. The calling phone does not have the correct partition configured.
Correct Answer: D
QUESTION 7
Refer to the exhibit.
100% Real Q&As | 100% Real Pass
When a Cisco IP Communicator phone roams from San Jose (SJ) to RTP, the Cisco IP Communicator physical location and the device mobility group change from SJ to RTP All route patterns are assigned a route list that points to the local route group All device pools are configured to use the local route group Which statement is true when the roaming phone places an AAR call?
A. Since globalized call routing is not configured, then the SJ gateway will be used in this case
B. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the SJ gateway
C. The phone will use the AAR CSS that contains the RTP_PSTN partition. The call will egress at the SJ gateway
D. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the RTP gateway.
E. The phone will use the AAR CSS that contains the RTP_PSTN partition The call will egress at the RTP gateway

Correct Answer: D
QUESTION 8
Refer to the exhibits.

Low latency queuing has been implemented on the HO and BR1 routers to allow five G.729 calls. Callers are still experiencing poor audio, in particular choppy and
delayed audio during traffic congestion. This problem occurs even with just one active call.
Which two actions will solve the issue?

100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
A. Change the codec type to G 711. J
B. Configure RSVP call admission control
C. Configure L ink Fragmentation and Interleave on the WAN links
D. Configure RTP header compression on the WAN links
E. Increase the priority queue bandwidth to 80 Kb/s
F. Configure location settings in Cisco Unified Communications Manager to 1 20 Kb/s
Correct Answer: CD

QUESTION 9
Refer to the exhibit.

When calling 911, which gateway/route list is defined in the route pattern in Cisco Unified Communications Manager and used to route matched digits to the PSTN?
A. SEP002290BA361B
B. standardLocalRG
C. RouteListCdrc
D. LRG_RL
E. nodeld = 1
F. BRANCH
100% Real Q&As | 100% Real Pass

Correct Answer: D

QUESTION 10
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they die happening?
A. traceroutes
B. RTMT real-time trace
C. Cisco Unified Communications Manager alerts
D. Cisco Unified Dialed Number Analyzer
E. RTMT performance log viewer
F. syslog output
Correct Answer: B

QUESTION 11
Refer to the exhibits.

MOH has been configured to run from flash at the BR1 site. The HQ phones and MOH server are placed in the Default region through the Default device pool. The
BR1 phones are placed in the BR1 region through the BR1
device pool. The region configuration between Default and BR1 only permits 729 codec.
When an IP phone user at the HQ site places a BR1 caller on hold, the BR1 caller hears tone on hold.
Which of the following can cause this issue?

100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
A. Multicast routing is not enabled on the BR1 router.
B. The command ip pim separate-dense-mode is missing from interface VLAN 120 at the SRST router in BR1.
C. The MOH server is unable to stream MOH using G.711 codec because of the regions configuration.
D. The command route 10.1.120.1 must be added to the multicast moh 239.1.1.1 port 16384 command at the SRST router in BR1.
E. The Max Hops is too small in the MOH configuration
100% Real Q&As | 100% Real Pass
Correct Answer: B

QUESTION 12
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with the subscriber as a backup server. When the user presses the settings button on the phone, only the Cisco Unified Communications Manager publisher shows as registered. What is the most likely cause for this issue?
A. The phone does not have the correct Cisco Unified Communications Manager group in the device configuration page.
B. The Cisco Unified Communications Manager group that is applied through the device pool is misconfigured.
C. The ip-helper address command for the subscriber is not configured on the switch port.
D. The subscriber does not have the correct device pool configured.
E. The enterprise phone configuration does not have the call control redundancy enabled.
Correct Answer: B

QUESTION 13
Which step in the problem-solving model is important to accurately interview end users to get all the pertinent details of the problem?
A. Implement Action Plan
B. Define the Problem
C. Consider the Possibilities
D. Create Action Plan
E. Gather Facts
F. Observe Results
G. Restart Problem-Solving Process
H. Problem Resolved
Correct Answer: E

QUESTION 14
Refer to the exhibit.

The exhibit shows the output of debug isdn q931. An inbound PSTN call was received by a SIP gateway that is reachable via a SIP trunk that is configured in Cisco Unified Communications Manager. The call failed to ring extension 3001. If the phone at extension 3001 is registered and reachable through the gateway inbound CSS, which three actions can resolve this issue? (Choose three.)
A. Change the significant digits for inbound calls to 4 on the SIP trunk configuration in Cisco Unified Communications Manager.
B. Configure the digit strip 4 on the SIP trunk under Incoming Called Party Settings in Cisco Unified Communications Manager.
C. Configure a translation pattern in Cisco Unified Communications Manager that can be accessed by the trunk CSS to truncate the called number to four digits.
D. Configure a called-party transformation CSS on the gateway in Cisco Unified Communications Manager that includes a pattern that transforms the number from ten digits to four digits.
E. Configure a voice translation profile in the SIP Cisco IOS gateway with a voice translation rule that truncates the number from ten digits to four digits.
F. Configure the Cisco IOS command num-exp 2288223001 3001 on the gateway ISDN interface.
Correct Answer: ACE

QUESTION 15
Which of these is used by the Cisco IP phone to relay to the switch the information regarding how much power is needed?
A. the Cisco Discovery Protocol
B. IEEE 802.10 protocol
C. Cisco IP phones always use a fixed power consumption hased on the resistor, which is specific to the model
D. The switch model determines how much power is consumed by the different phone models
Correct Answer: A

QUESTION 16
Refer to the exhibit.
100% Real Q&As | 100% Real Pass
Assume a centralized Cisco Unified Communications Manager topology with the headquarters at RTP and remote located at the U.K.
All route patterns are assigned a route list that contains a route group pointing to the local gateway. RTP route patterns use the RTP
gateway, and U.K. route patterns use the K. gateway.
When a U.K. user logs into an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000, which statement about the
emergency call is true?

A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway.
E. The call will fail.
Correct Answer: B

QUESTION 17
Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager?
A. missing the configuration command isdn bind-13 ccm-manager under the ISDN interface
B. mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway configuration
C. misconfigured route group in Cisco Unified Communications Manager
D. incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager
Correct Answer: B
QUESTION 18
Refer to the exhibits.

The HG_MRG that is shown in the exhibit is assigned to an MRGL, which is configured at the HQ phones.
A call exists between two HQ phones that use G.711 codec. When one of the HQ users attempts to conference a BR phone across the WAN, the conference fails.
The SDI trace shows an error “No transcoder device configured.”
Which statement indicates the correct resolution or reason for the issue?

100% Real Q&As | 100% Real Pass
D:\job\TestKing\Cisco\642-427\HYPERLINK
100% Real Q&As | 100% Real Pass

A. The BR phone does not have access to the HO_Conf bridge
B. The BR phone does not have access to the CFB_2 bridge
C. The BR phone does not have access to a transcoder
D. The CFB_2 bridge should be removed from the HQ_MRG and assigned to an MRG that is not assigned to an MRGL
E. The CFB_2 bridge should be listed last in the HO_MRG
Correct Answer: E

QUESTION 19
Refer to the exhibits.

When a remote Cisco Unified Communications Manager learns the advertised patterns that are shown in the exhibit, which patterns would be shown in the Cisco Unified Communications Manager RTMT tool?
A. 2XXX and the ToDiD will be 0:+498950555
B. 2XXX and the ToDiD will be 0+498953121
C. +4989505552XXX and the ToDiD will be 0:
D. +498953121 2XXX and the ToDiD will be 0:
E. Both +4989505552XXX and +4989531 21 2XXX will be advertised with ToDID of 0:
Correct Answer: A

QUESTION 20
Refer to the exhibits.
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
When the IP phone 2001 places a call to 9011 49403021 56001, the call is sent to the Cisco Unified Border Element as 40302156001 which is what the ITSP expects to receive. The ITSP support personnel claim that they never saw the call. Issuing the debug CCSIP message command on the Cisco Unified Border Element results in the message “SIP/2 0 404 Not Found”.
Refer to the Cisco Unified Border Element configuration, debug voice dial and ccsip messages exhibits. Which situation can cause this issued?
A. The Cisco Unified Bolder Element is configured as an MGCP gateway also so that the call is attempted via the PSTN
B. The command allow-connections sip to h323 is missing
C. SIP error 404 means that a codec mismatch occurred Cisco Unified Communications Manager is sending the call as an early offer with G.711 codec.
D. The Cisco Unified Communications Manager is rnisconfigured. The SIP invite should be sent to the ITSP at 10.1.2.1.2. The debug ccsip message shows the SIP invite being sent to 10.12.1.2.

Correct Answer: B

Flydumps.com never believes in second chances and hence bring you the best Cisco 642-427 exam preparation materials which will make you pass in the first attempt. Flydumps.com experts have complied the fail Cisco 642-427 exam content to help you pass your Cisco 642-427 certification exam in the first attempt and score the top possible grades too.

You may also like