Welcome to download the newest Jumpexam C2090-611 VCE dumps: http://www.jumpexam.com/C2090-611.html
Passed Extreme Networks EW0-200 yesterday on first attempt only using the Exampass premium vce and one corrected answers.Thanks a lot for your valuable update reagding premium dump.It will definitely help me for preparing for the exam before to write.
When a port is added to a tagged VLAN, jumbo frame support must be enabled to compensate for the increased frame size.
Correct Answer: B QUESTION 32
The modular BlackDiamond 6804 switch supports the following legacy WAN modules? (Choose all three that apply)
A. 2-port SONET/SDH OC-12c/STM-4 PoS
B. 4-port SONET/SDH OC-3c/STM-1 PoS
C. 4-port SONET/SDH OC-3/STM-1 ATM
D. 16-port SONET/SDH T3/E3 PoS/ATM
Correct Answer: ABC QUESTION 33
In an Extreme Switch, the routing function is disabled on all VLANs by default.
Correct Answer: A QUESTION 34
The acronym TCP/IP stands for:
A. Transport Control Protocol/Internal Protocol
B. Transmission Control Protocol/ International Protocol
C. Transfer Control Policy/Interactive Protocol
D. None of these
Correct Answer: D QUESTION 35
In a Summit 5i switch, a MAC address must be configured for each physical port before routing can be configured.
Correct Answer: B QUESTION 36
Given the following diagram, how would you disable ports 3 through 8 on module 1 and all ports on modules 3 and 4?
A. disable ports slot 1 ports 3-8, slot 3 ports 1-8, slot 4, ports 1-8
B. unconfig ports 1:3-1:8, 3:1-4:8
C. config vlan <name> delete ports 1:3-1:8, 3:1-4:8
D. disable ports 1:3-1:8, 3:1-4:8
Correct Answer: D
What information is not provided by the CLI command: show version?
A. The ExtremeWare software image version and the build date and time
B. The MAC address of the switch
C. The Switch Serial Number
D. The BootROM version
Correct Answer: B
You have been assigned the task of configuring an 8-port load share group between two switches that use the address-based algorithm. Which of the following commands will provide you with the desired result?
A. Summit #1: enable sharing 1 grouping 1-8 algorithm address-basedSummit #2: enable sharing 8 grouping 1-8 algorithm address-based
B. Summit #1: enable sharing 1 grouping 1-8 algorithm address-basedSummit #2: enable sharing 1 grouping 1-8 algorithm address-based
C. Summit #1: enable sharing 1 grouping 1-8 address-based algorithmSummit #2: enable sharing 1 grouping 1-8 address-based algorithm
D. None of the above.
Correct Answer: B
Which CLI command would you use to configure proxy ARP for IP address 10.0.0.1/24 with MAC address
so that it will respond regardless of the VLAN?
config iparp add proxy 00:11:22:33:44:55 10.0.0.1/24 always
config iparp add proxy 10.0.0.1/24 00:11:22:33:44:55 always
config proxyarp add 10.0.0.1/24 00:11:22:33:44:55 always
config proxyarp add 00:11:22:33:44:55 10.0.0.1/24 always
Correct Answer: B QUESTION 40
The IP ROUTING field indicates whether IP forwarding has been enabled or disabled when the CLI command: show ipconfig is entered.
Correct Answer: A QUESTION 41
How can you tell by looking at the front panel of an Summit 1i switch, which ports are disabled?
A. Flashing amber light
B. Flashing green light
C. Solid amber light
D. Solid green light
Correct Answer: B QUESTION 42
What does the TFTP acronym stands for?
A. True File Transfer Protocol
B. Total File Transfer Protocol
C. Trivial File Transfer Protocol
D. Transport File Trough Protocol
Correct Answer: C QUESTION 43
SNMP access to a Summit 48si switch can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the CLI command: disable snmp access
D. All of these
Correct Answer: D QUESTION 44
In addition to maintaining an internal log, ExtremeWare supports remote logging feature via the UNIX syslog facility.
B. FALSE Correct Answer: A QUESTION 45
Passwords for login names on ExtremeWare CLI accounts are case-sensitive.
Correct Answer: A QUESTION 46
Extreme switches learn source MAC addresses and perform bridging based on the destination MAC address of incoming Ethernet frames.
Correct Answer: A QUESTION 47
The RFC 1918 describes the use and benefits of IP address space for private networks. The following IP address 10.10.60.254/23 can be considered as a valid private IP address.
Correct Answer: A QUESTION 48
The Spanning Tree Protocol is designed to:
A. Calculate the shortest path route to a destination network.
B. Calculate the topology of a network for the RIP protocol.
C. Prevent bridging loops in a layer-2 network.
D. Better utilize multiple paths between VLANs.
Correct Answer: C QUESTION 49
The modular Alpine 3808 has a capacity of 64Gbps and can forward 48 million packets per second.
Correct Answer: A QUESTION 50
Which CLI command will remove the IP address that has been assigned to the default VLAN?
A. config default unconfig ipaddress
B. config default delete ipaddress
C. unconfig default ipaddress
D. disable default ipaddress
Correct Answer: C QUESTION 51
Which layer of the OSI reference model is responsible for formatting data used by the application layer?
A. Session layer
B. Presentation layer
C. Network layer
D. Transport layer
Correct Answer: B QUESTION 52
When typing commands, the ExtremeWare CLI will auto-complete a command if followed with this keystroke:
A. Space bar
B. Escape key
C. Tab key
D. None of these
Correct Answer: C QUESTION 53
There can be only one frame transmitted at a time on a traditional CSMA-CD Ethernet network. What is the result when more frames are sent at the same time?
D. Jumbo frames
Correct Answer: C QUESTION 54
It is highly recommended to change the SNMP community strings on an Extreme switch from the factory default. The following well-known community strings apply by default:
A. R/O extreme R/W networks
B. R/O public R/W private
C. R/O shared R/W secret
D. R/O nonblocking R/W wirespeed
Correct Answer: B QUESTION 55
In normal IP unicast routing, all forwarding decisions are based on the ______________ of each packet.
A. destination MAC address
B. source IP address
C. source MAC address
D. destination IP address
Correct Answer: D QUESTION 56
I/O modules for the BlackDiamond 6808 and Alpine 3804 switch products are interchangeable.
Correct Answer: B QUESTION 57
The ExtremeWare feature that configures the switch to copy all traffic associated with one or more ports for traffic analyses purpose is:
A. IP Multinetting
C. Port Load Sharing
D. None of these
Correct Answer: B QUESTION 58
The CLI Command ?7KH&/,&RPPDQGdisable learning ports 1?will do the following on an Extreme switch:
A. disable MAC address learning for port 1
B. disable link detection for port 1
C. disable STP learning on port 1
D. None of the above
Correct Answer: A QUESTION 59
Given the following diagram, which command would you use to send the switch active configuration file to the TFTP server?
A. download config 192.168.0.1 <filename>
B. upload config 192.168.0.254 <filename>
C. download config 192.168.0.254 <filename>
D. upload config 192.168.0.1 <filename>
Correct Answer: B QUESTION 60
What is the default STP max age value?
A. 20 seconds
B. 30 seconds
C. 40 seconds
D. 60 seconds
Correct Answer: A QUESTION 61
Which CLI command would you use to configure VLAN corporate with IP address 192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Correct Answer: A QUESTION 62
Upgrading the BootROM on a Summit 48i switch is done via the CLI command:
A. upload bootrom [<host_name> | <ip_address> ] <filename>
B. enable bootrom [<host_name> | <ip_address> ] <filename>
C. download bootrom [<host_name> | <ip_address> ] <filename>
D. None of these
Correct Answer: C QUESTION 63
Classless routing and VLSM are supported by ExtremeWare.
Correct Answer: A QUESTION 64
What is the broadcast address for 192.168.1.49/30?
Correct Answer: A QUESTION 65
What is the maximum number of VLANs that can be tagged on a single link between Extreme Networks switches.
Correct Answer: C QUESTION 66
Which of the following sequences identifies a TCP three-way handshake?
A. SYN ?SYN ?ACK
B. SYN ACK ?ACK ?TCP SYN
C. TCP SYN ?ACK – SYN-ACK
D. TCP SYN ?SYN ACK – ACK
Correct Answer: D QUESTION 67
OSPF is a link-state type of routing protocol.
Get yourself composed for Microsoft actual exam and upgrade your skills with Flydumps Extreme Networks EW0-200 practice test products. Once you have practiced through our assessment material, familiarity on Extreme Networks EW0-200 exam domains get a significant boost. Flydumps practice tests enable you to raise your performance level and assure the guaranteed success for Extreme Networks EW0-200 exam.
Jumpexam C2090-611 dumps with PDF + Premium VCE + VCE Simulator: http://www.jumpexam.com/C2090-611.html