Cisco 642-980 Question Description, 50% OFF Cisco 642-980 Study Material Are Based On The Real Exam

Welcome to download the newest Pass4itsure C2020-011 VCE dumps: http://www.pass4itsure.com/C2020-011.html

While your study aids will not be audio exams, your Cisco 642-980 exam sample questions will be the perfect Cisco 642-980 exam sample questions study materials to guarantee that you pass. Cisco 642-980 exam sample questions provide you with the experience of taking the actual test. Come to FLYDUMPS; choose your like to prepare your Cisco certification exams. FLYDUMPS  fully loaded Cisco 642-980 exam and Cisco test software are the absolute perfect and preferred way of get yourself ready for the Cisco exams by thousands of successful certified professionals across the world. Just about Cisco 642-980 exam sample questions are backed by our 100% pass guarantee. We guaranteed you will pass your Cisco 642-980 Exam on your first attempt. Get Cisco certified this week and download HP certification with your computer today.

QUESTION 1
Which command displays the traffic statistics for a port channel interface?
A. show interface port-channel channel-number
B. show port-channel traffic
C. show port-channel usage
D. show port-channel compatibility-parameters

Correct Answer: B
QUESTION 2
Which statement is true regarding LACP configuration?
A. With LACP, you can bundle up to 16 interfaces in a channel group.
B. LACP configuration is global and can be only configured by admin.
C. After removing LACP configuration, you need to reboot the device.
D. You can disable LACP while any LACP configurations are present.

Correct Answer: A
QUESTION 3
Which two statements are true regarding vPC configuration? (Choose two.)
A. With vPC, there are no blocked ports.
B. vPC uses hash-based EtherChannel load balancing.
C. There are STP-blocked redundant links.
D. There is VLAN-based load balancing.
E. There is higher oversubscription.
Correct Answer: AB
QUESTION 4
Refer to exhibit.

Customer has a pair of Cisco Nexus7010s switches and connected to a single Cisco Nexus5548 switch via vPC. Customer has a combination of M1 and F1 I/O Modules in Cisco Nexus7010s.
Why is the design described not supported?
A. Mixing I/O Modules on the Same Side of a Peer Link is not supported
B. vPC does not support split control plane
C. You can not configure a vPC peer link to configure two devices as vPCs
D. Need to add another Cisco Nexus5548 switch to the topology to make this work. Correct Answer: A
QUESTION 5
What is one requirement for running FabricPath on a Cisco Nexus 7000 Series switches?
A. You must have an F Series module
B. You must run NX-OS version 4.2 to run FabrciPath
C. ISSU needs to be disabled to run FabricPath
D. LAN_TRANSPORT_SERVICES_PKG license needs to be installed to run FabrciPath

Correct Answer: A
QUESTION 6
Which statement is true regarding Cisco FabricPath?
A. It is necessary to first install the Cisco FabricPath feature set in the default VDC.
B. Cisco FabricPath is only available on Cisco Nexus 7010 Switches with the Supervisor 2 engine.
C. Cisco FabricPath cannot be disabled explicitly for a specific VDC.
D. If the Cisco FabricPath feature is not installed, the fabricpath keyword will be available in the feature-set command.

Correct Answer: A
QUESTION 7
Your customer is an ISP providing service to thousands of end customers. Its main concerns are focused on using up the total number of 4096 VLANs per VDC, wasting an unused block of IP addresses, and IP address management. Which technique will address these concerns?
A. create a separate VDC to scale VLAN limitation and upgrade to Cisco Nexus 7018 Switch
B. segment VLANs using secondary IP addresses, which will reduce the management domain
C. create mapping between the VLAN and VSAN to run FCoE to consolidate VLAN and IP addresses
D. use PVLANs, which will solve the scalability problem and provide IP address management

Correct Answer: D
QUESTION 8
Which statement is true regarding STP?
A. When the spanning-tree topology is calculated based on default parameters, the path between the source and destination end stations in a switched network might not be ideal.
B. The path between the source and the destination end stations is always ideal with the default spanning-tree parameter.
C. The path between the source and the destination end stations is determined by the speed of the link; the slowest link speed will become the root port during the election.
D. The path between the source and the destination end stations is determined by the lowest MAC address; the lowest MAC address will become the root port during the election.

Correct Answer: A
QUESTION 9
On the secondary vPC switch, under which circumstance does the vPC autorecovery feature not bring up the vPC member ports?
A. Peer link fails, and subsequently, the peer-keepalive link fails.
B. Peer link is up, and the peer-keepalive link fails.
C. Both vPC peers are reloaded, and the primary does not come back up.
D. Peer link fails, and subsequently, the primary switch fails.
Correct Answer: B QUESTION 10
A customer is deploying FCoE in its networ and has found that the connected host does not support FIP. Which command will be useful in troubleshooting this issue?
A. show platform fcoe_mgr info interface vfc id
B. show platform fcoe_mgr info software interface vfc id
C. show platform software fcoe_mgr info interface vfc id
D. show platform software interface fcoe_mgr info vfc id

Correct Answer: C
QUESTION 11
A customer is troubleshooting FCoE in its network. They have discovered that vFC is currently down and there is no active STP port state on the bound Ethernet interface. What should the STP port state be to correct this issue?
A. The bound interface should be in an STP forwarding state for the native VLAN only.
B. The bound interface should be in an STP learning state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
C. The bound interface should be in an STP forwarding state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.
D. The bound interface should be in an STP blocking state for both the native VLAN and the member FCoE VLAN that is mapped to the active VSAN.

Correct Answer: C
QUESTION 12
When configuring LLDP on Cisco Nexus 5548 Switch, what is the purpose of LLDP hold time global configuration command?
A. LLDP holdtime option is to set the length of time in milliseconds that a device should save LLDP information received before discarding it
B. LLDP holdtime option is to set the length of time in seconds that a device should save LLDP information received before discarding it
C. LLDP holdtime option to is the length of time in milliseconds to wait before performing LLDP initialization on any interface
D. LLDP holdtime option to is the length of time in seconds to wait before performing LLDP initialization on any interface

Correct Answer: B
QUESTION 13
A customer is troubleshooting FCoE in its network and sees pause counters increasing when it runs the command show interface eth1/5. What is the cause of this?
A. The CNA connected to the switch is sending Xon or Xoff PFC frames.
B. The HBA connected to the switch is sending Xon or Xoff PFC frames.
C. Pause counters increase regularly; there is nothing to be concerned about.
D. A firmware upgrade on the Fibre Channel adapter that is connected to the switch will fix this issue.

Correct Answer: A
QUESTION 14
On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS statements must be configured for FCoE to operate?
A. system qos service-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy
B. system qos service-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type qos input default-in-policy service-policy type network-qos default-nq-policy
C. system qos service-policy type qos input default-in-policy service-policy type queuing input default-in-policy service-policy type queuing output default-out-policy service-policy type network-qos default-nq-policy
D. system qos service-policy type qos input default-in-policy service-policy type queuing input default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy

Correct Answer: A
QUESTION 15
One of your Cisco Nexus Series interfaces has become errdisabled with the error message “DCX-No ACK in 100 PDUs”. How often are these acknowledgements exchanged?
A. 15 seconds
B. 30 seconds
C. 45 seconds
D. 60 seconds
Correct Answer: B
QUESTION 16
Refer to the exhibit.

What command should you execute next in resolving a lock failure?
A. ntp execute
B. ntp commit
C. ntp lock
D. ntp help
E. ntp detail
Correct Answer: B
QUESTION 17
Refer to the exhibit.

The customer informs you of a problem they are encountering. What is the cause of the problem?
A. The core upstream switch does not have NPIV enabled.
B. The downstream switch does not have NPIV enabled.
C. NPIV has been disabled on all switches.
D. NPIV has been configured but not enabled on the uplink port.

Correct Answer: A QUESTION 18
Refer to the exhibit.

A customer is having difficulty getting NPV working. What is the cause of the problem?
A. The core NPV device is not enabled.
B. The core NPV device is not a switch.
C. The core NPV device is not configured on both ends.
D. The core NPV device is not configured on the upstream port.

Correct Answer: B QUESTION 19
Refer to the exhibit.

A customer is having a problem getting NPV to work. What is causing the problem?
A. The core NPV switch port is not an F port.
B. The core NPV switch port is in a shutdown state.
C. The core NPV switch port is not configured on both ends.
D. The core NPV switch port is not configured on the other end.
E. The core NPV switch ports are in the wrong domain.

Correct Answer: A
QUESTION 20
Refer to the exhibit.

A customer is having a problem with NPV. Which of these is the cause of the problem?
A. No server was requested or received by the FLOGI database.
B. One external link must be up for server interface to be up.
C. Multiple external links must be up for the server to come up.
D. Internal links are down and must be up for the server interface to be up.

Correct Answer: B QUESTION 21
Refer to the exhibit.

A customer is having problems with NPV. Which of these is the cause of the problem?
A. No server was requested or received by the FLOGI database.
B. One external link must be up for server interface to be up.
C. Internal links are down and must be up for the server interface to be up.
D. VSANs are misconfigured on the upstream ports.
E. VLANs are misconfigured on the upstream ports.

Correct Answer: D
QUESTION 22
Refer to the exhibit.

When your customers have NPV problems, which three actions should you take? (Choose three.)
A. Verify that the NPV core switch supports NPIV and that it is enabled.
B. Verify that all ports are properly configured and connected.
C. Ensure that the VLAN values are configured on both sides of the NPV core switch.
D. Verify the status of the servers and external interfaces, using the show npv server status command.
E. Ensure that the VSAN value that is configured on the device links is correct.
F. For all the device links, ensure that the port mode on the NPV device is in Full_port mode.

Correct Answer: ABE
QUESTION 23
Refer to the exhibit.

When suspending or deleting VSANs, which three statements are true? (Choose three.)
A. You can delete only one VSAN at a time.
B. You must wait 60 seconds after you enter the vsan suspend command before you enter another command.
C. You must wait 120 seconds after you enter the vsan suspend command before you enter another command.
D. You can unsuspend only one VSAN at a time.
E. You can delete multiple VSANs as long as they are in the same domain.
F. You can delete multiple VSANs as long as they are in the same zone.

Correct Answer: ABD
QUESTION 24
Refer to the exhibit.

During a VSAN outage, you come across this configuration. Please select two possible causes? (Choose two)
A. no common VSANs on both switches
B. no common trunks
C. no common VSAN members in the same trunk
D. VSANs in trunk are the same, but the trunk is not up

Correct Answer: AC QUESTION 25
Refer to the exhibit.

The server port connected to the NPV edge switch does not come online. Which action should fix the problem?
A. Move the NP ports on the NPV edge and the F ports on the NPIV into the same VSAN 99.
B. Move the NP ports on the NPV edge and the F ports on the NPIV in the default VSAN 1.
C. Move all the ports into VLAN 1.
D. Move all the ports into VSAN 99.
E. Move all the ports into VLAN 99.

Correct Answer: A

Each Answers in Cisco 642-980 study guides are checked by the concerned professional to provide you the best quality dumps. If you are looking to get certified in short possible time, you will never find quality product than Flydumps.com.

Pass4itsure C2020-011 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/c2020-011.html

You may also like