[2020.7] Free NetApp NS0-509 Exam Questions & Practice Tests

If you are looking for the best NetApp NS0-509 exam questions about NetApp Certifications NS0-509 exam dumps, then you have come to the right place. The website https://www.pass4itsure.com/ns0-509.html brings you a dumps of NS0-509, and you can find all updated NS0-509 exam questions on pass4cert.

Click Here & Success Now: https://drive.google.com/file/d/1Jgmo8A26UKs1vsJMfir-uWVxZ7N08Df2/view?usp=sharing Free Updated NetApp NS0-509 PDF

Latest NetApp NS0-509 Exam Question, at Pass4itsure!

If you are eager to pass the NetApp NS0-509 exam, please try our latest exam questions. Our professional team is always at the back end and can update materials, so our users can update with the latest materials introduced.

Prepare NetApp NS0-509 Exam: NS0-509 Practice Questions

QUESTION 1
Exhibit.

pass4cert NS0-509 exam questions-q1

The host in the exhibit is connected to a 4-node ONTAP SAN using dual-fabric implementation. LUNs have been
mapped LUN through all available UFs on nil (our nodes. Switch 2 is powered off for high- availability testing. How many
paths per LUN would you expect the host to see in this scenario?
A. 2
B. 6
C. 4
D. 8
Correct Answer: C

QUESTION 2
Exhibit.

pass4cert NS0-509 exam questions-q2

Referring to the exhibit, which type of zoning should be used?
A. a WWPN with a single initiator and multiple targets
B. a WWPN with a single initiator and a single target
C. a WWNN with a single initiator and multiple targets
D. a WWNN with a single Initiator and a single target
Correct Answer: B

QUESTION 3
You are provisioning storage to an ESX host that uses iSCSI.
According to NetApp best practice, which three actions accomplish this task? (Choose three.)
A. Enable the iSCSI service.
B. Bind the iSCSI ports to the software iSCSI adapter.
C. Install Virtual Storage Console (VSC) for VMware.
D. Enable BGP on the switch.
E. Configure MTU 1500 on the switch.
Correct Answer: BCE

QUESTION 4
You currently have a FAS8200 with ONTAP 9.5. You want to expand the front end FC I/O capabilities. However, you
are unsure which target adapters are supported. What would you use to confirm which adapters are supported with your
current configuration?
A. Hardware Universe (HWU)
B. Upgrade Advisor
C. OneCollect
D. Interoperability Matrix Tool (IMT)
Correct Answer: A
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMLP2495115

QUESTION 5
Click the Exhibit button.

pass4scert NS0-509 exam questions-q5

You are implementing an ONTAP 9.5 AFF A300 SAN cluster with the NVMe, FC, and FCoE protocols.
Referring to the exhibit, which three protocols and physical port pairs are supported? (Choose three.)
A. NVMe on ports 2a/2b
B. FC on ports 2a/2b
C. NVMe on ports 0e/0f
D. FCoE on ports 0e/0f
E. FC on ports 0e/0f
Correct Answer: BCD

QUESTION 6
A user cannot add more than one NVMe data LIF in ONTAP 9.4 on an SVM with a data protocol parameter set to nvme.
In this scenario, what is the problem?
A. The SVM data protocol should be set to FC.
B. The NVMe namespace is not created.
C. A demo license is used.
D. Only one NVMe data LIF can be configured per SVM.
Correct Answer: B


QUESTION 7
An administrator is adding new hosts to a vSphere cluster. The cluster uses the FC protocol to connect to a NetApp
cluster. The administrator wants to configure the multipathing for the ESXi host. Which NetApp tool should be used to
accomplish this task?
A. OnCommand System Manager (OCSM)
B. Host Utilities
C. SnapCenter plug-in
D. NetApp Virtual Storage Console (VSC)
Correct Answer: D
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1547465

QUESTION 8
Click the Exhibit button.

pass4cert NS0-509 exam questions-q8

A 4-node cluster was expanded with two news nodes (Nodes 5 and 6). You are now attempting to set up four FC LUNs
on the two new nodes that use the ps2 igroup name, although FC ping works. LUNs on the previous four nodes are
discoverable, but the four new LUNs on the new controllers are not discoverable.
Referring to the exhibit, what is the problem?
A. The zones between the hosts and LIFs are from node-05 and node-06.
B. Selective LUN Mapping (SLM) is not configured for this HA pair.
C. The portset must be configured to reflect Nodes 5 and 6.
D. Igroup ps2 has the portset configured with the LIFs.
Correct Answer: C

QUESTION 9
Click the Exhibit button.

pass4cert NS0-509 exam questions-q9

A customer needs to change ports 0e and 0f on AFF_1 to support FC.
Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)
A. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type target command.
B. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.
C. Restart the FC service.
D. Take ports 0e and 0f offline.
E. Reboot the node.
Correct Answer: BCD

QUESTION 10
Exhibit.

pass4cert NS0-509 exam questions-q10

Referring to the exhibit. What are two viable scenarios to test LUN multipathing on Host 1? (Choose two.)
A. Reboot one of the switches.
B. Disable one of the FC LIFs on Controller 1.
C. Disconnect one of the host cables.
D. Reboot Host 1.
Correct Answer: AC

QUESTION 11
You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage
efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 LUNs
that use under 5000 IOPS are moved to a FAS8200 using the lun move command.
In this scenario, what happens to the data after the LUN is moved? (Choose two.)
A. The new written data is not compacted.
B. The new written data is compacted.
C. The existing data is compacted.
D. The existing data is not compacted.
Correct Answer: BD
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cmvsmg%2FGUID-9C88C1A6-990A-4826-83F8-0C8EAD6C3613.html

QUESTION 12
Which two are supported in ONTAP 9.5? (Choose two.)
A. an NVMe LIF and an FC LIF in the same SVM
B. an NVMe LIF associated with an FC Direct Connect port
C. an NVMe LIF and an FC LIF associated with the same port
D. multiple NVMe LIFs in the same SVM
Correct Answer: CD

QUESTION 13
Exhibit.

pass4cert NS0-509 exam questions-q13

You are moving volumes between aggregate aft_01_aggr1 and the aggregate Aggr_Data shown in the exhibit. How
much space will be moved?
A. 11.17 TB
B. 935.75 GB
C. 296 KB
D. 1. 91 TB
Correct Answer: C
 

The NS0-509 exam questions are good to boost up your confidence level.

Why use Pass4itsure for NS0-509 exam preparation

why-choose-pass4itsure

Pass4itsure is a pioneer in the IT field and has been providing services for a long time. We have provided services to many customers around the world and won their trust by making them qualified professionals.

What People Are Saying

Pass4itsure People Are Saying

Pass4itsure discount code 2020

Pass4itsure offer discount Coupon [2020PASS] where you get a 12% discount for purchasing Pass4itsure NetApp NS0-509 exam questions. Get our NS0-509 questions PDF with Discount Today.

Pass4itsure discount code 2020

Latest Updates NetApp NS0-509 PDF Dumps

NetApp NS0-509 PDF Dumps 100% Free https://drive.google.com/file/d/1Jgmo8A26UKs1vsJMfir-uWVxZ7N08Df2/view?usp=sharing

You can download NetApp NS0-509 training materials and all necessary NetApp NS0-509 dumps that you need to know from pass4cert.

Get the complete NetApp NS0-509 question answers pdf & start preparation: https://www.pass4itsure.com/ns0-509.html Q&As: 149.

Continue Reading