Are you studying for the Microsoft 70-412 exam? I presented the 70-412 Exam Prep session at Pass4itsure and the session is now available online. If you are planning to take the exam, it would be worth the 75 minutes to check it out. This session also covers part of the 070-412 exam.
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 Services
Updated: Apr 04, 2017
The MCSE Desktop Infrastructure certification validates your skills in desktop virtualization, remote desktop services and application virtualization. Show that you can deploy and manage desktops and devices that provide 70-412 exam access from anywhere, while maintaining security and compliance.
Pass4itsure Latest and Most Accurate Microsoft 70-412 Exam Q&As
The CEC is revised every four years.
Correct Answer: A QUESTION 12
Which of the following is the standard for “Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications”?
A. ANSI/IEEE C62.41
B. ANSI/IEEE C62.45
C. ANSI/IEEE P1188-1996
D. ANSI/IEEE P1187-1996
Correct Answer: D QUESTION 13
For design purposes, which of the following would be the typical size range of a 4-pair 100 ohm UTP or ScTP (FTP) cable?
A. .50 in to .75 in
B. .14 in to .25 in
C. .31 in to .43 in
D. .11 in to .18 in
Correct Answer: B QUESTION 14
In what year was the TIA formed?
Correct Answer: A QUESTION 15
In an “underfloor duct system”, the distribution ducts carry cables from the TR to the feeder ducts.
Correct Answer: A QUESTION 16
What is the standard floor space allocation used in an office environment for one individual work area?
A. 100 square feet.
B. 50 square feet.
C. 150 square feet.
D. 75 square feet.
Correct Answer: A
352-001 pdf QUESTION 17
NRZ is the acronym for which of the following?
A. Non-return to zero.
B. Nominal return zone.
C. Network registration zone.
D. Normal return zone. Correct Answer: A
Which of the following is the international standard for premises cabling?
A. ISO/IEC 18010
B. ISO/IEC 11801
Correct Answer: B QUESTION 19
The inadvertent transposition of two conductors of separate pairs is called what?
A. Twisted pair
B. Transposed pairs
C. Reversed pair
D. Split pair
Correct Answer: D QUESTION 20
A “wye” is a power system in which only one point is grounded.
Correct Answer: B QUESTION 21
Improper grounding of telecommunications pathways may increase susceptibility of EMI.
Correct Answer: A
A “sag” is a decrease in normal root mean square (rms) voltage or current lasting 0.5 cycles up to one minute.
Correct Answer: B QUESTION 24
Which of the following is an address used to uniquely identify each device on a LAN with an address coded in the network interface card?
D. Physical Layer
Correct Answer: A QUESTION 25
In what year was BICSI formally incorporated?
Correct Answer: A
Pass4itsure technical expert highly recommend that you buy this Microsoft 70-412 exam Q&A and Preparation Materials value pack. In order that candidates will better grasp the Microsoft 70-412 exam knowledge, our technical experts outline the examination topics and compile a set of Pass4itsure Preparation Materials, which not only covers all the main and important Microsoft exam, but also adds some sample questions and analysis of related certification.
For more 70-412 exam self-guided learnings on other Microsoft products, you can go to Pass4itsure.com. There are a couple of new exciting Windows Server 2012 courses just added. If you are a travelling user and if enjoy doing some self-guided Windows Server 2012 hands-on labs in an “Anytime, Anywhere” basis, you can try out the Windows Server 2012 virtual labs at https://www.pass4itsure.com/70-412.html. They are cool and awesome, enjoy!
The latest updates Microsoft Windows Server 2012 70-412 dumps, 70-412 pdf free download, 70-412 exam practice test questions to improve your skills. “Configuring Advanced Windows Server 2012 Services” 70-412 Exam. Easy to pass the exam: Pass4itsure.com!
The latest Microsoft Windows Server 2012 70-412 pdf free download
Exam 70-412: Configuring Advanced Windows Server 2012 Services: https://www.microsoft.com/en-us/learning/exam-70-412.aspx This exam is part three of a series of three exams that test the skills and knowledge necessary to administer a Windows Server 2012 infrastructure in an enterprise environment. Passing this exam validates a candidate’s ability to perform the advanced configuring tasks required to deploy, manage, and maintain a Windows Server 2012 infrastructure, such as fault tolerance, certificate services, and identity federation. Passing this exam along with the other two exams confirms that a candidate has the skills and knowledge necessary for implementing, managing, maintaining, and provisioning services and infrastructure in a Windows Server 2012 environment.
pass4itsure 70-412 exam Skills measured
This exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the exam.
Configure and Manage High Availability
Configure File and Storage Solutions
Implement Business Continuity and Disaster Recovery
Configure Network Services
Configure the Active Directory Infrastructure
Configure Access and Information Protection Solutions
Latest Microsoft Windows Server 2012 70-412 Exam Practice Test Questions and Answers
QUESTION 1 Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the Hyper-V server role and the Failover Clustering feature installed.
You need to replicate virtual machines from Cluster1 to Cluster2. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. From Hyper-V Manager on a node in Cluster2, create three virtual machines. B. From Cluster2, add and configure the Hyper-V Replica Broker role. C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication. D. From Cluster1, add and configure the Hyper-V Replica Broker role. E. From Hyper-V Manager on a node in Cluster2 modify the Hyper-V settings. Correct Answer: CDE D. You must configure the Hyper-V Replica Broker for cluster1. E. We must configure configure the Replica server to receive replication from primary servers: In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration. In the Details pane, select Enable this computer as a Replica server. C. Enable virtual machine replication. Once the hosting server is configured for Replica, you can enable replication for each virtual machine that you want to be replicated. Reference: Deploy Hyper-V Replica https://technet.microsoft.com/en-us/library/jj134207.aspx
QUESTION 2 Your network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computers run Windows 8.1. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2. You need to identify which domain controllers are authorized to be cloned by using virtual domain controller cloning. Which cmdlet should you use? A. Get-ADGroupMember B. Get-ADDomainControllerPasswordReplicationPolicy C. Get-ADDomainControllerPasswordReplicationPolicyUsage D. Get-ADDomain E. Get-ADOptionalFeature Correct Answer: A If you want to be able to clone a Domain Controller, then authorize the original source Domain Controller to be used as the source for cloning by adding its computer object into the new “Cloneable Domain Controllers” Active Directory group. The Get-ADGroupMember cmdlet gets the members of an Active Directory group. Members can be users, groups, and computers. We use the Get-ADGroupMember cmdlet to retrieve the members of the “Cloneable Domain Controllers” Active Directory group. References: http://blogs.technet.com/b/keithmayer/archive/2012/08/06/safely-cloning-an-active-directory-domain-controller-with-windows-server-2012-step-by-step-ws2012-hyperv-itpro-vmware.aspx
QUESTION 3 Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the DHCP Server server role installed. Server1 is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addresses to the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in the branch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can still obtain IPv4 addresses. The solution must meet the following requirements: -The storage location of the DHCP databases must not be a single point of failure. -Server1 must provide IPv4 addresses to the client computers in the branch office site only if Server2 is offline. – Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline. Which configuration should you use? A. load sharing mode failover partners B. a failover cluster C. hot standby mode failover partners D. a Network Load Balancing (NLB)cluster Correct Answer: C Needs to be a DHCP Failover option
QUESTION 4 Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The forest functional level is Windows 2000. The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The domain functional level is Windows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows 2000 Server or Windows Server 2003. The domain functional level is Windows 2000 native. The contoso.com domain contains a member server named Server1 that runs Windows Server 2012 R2. You need to add Server1 as a new domain controller in the contoso.com domain. What should you do first? A. Raise the functional level of the contoso.com domainto Windows Server 2008 R2. B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2. C. Raise the functional level of the fabrikam.com domain to Windows Server 2003. D. Decommission the domain controllers that run Windows 2000. E. Raise the forest functional level to Windows Server 2003. Correct Answer: D Server 2003 is the minimum Domain Functional level for any domain in the forest Windows Server 2012 R2 requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller that runs Windows Server 2012 R2 to an existing Active Directory forest, the forest functional level must be Windows Server 2003 or higher.
QUESTION 5 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. You are creating a central access rule named TestFinance that will be used to grant members of the Authenticated users group access to a folder stored on a Microsoft SharePoint Server 2013 server. You need to ensure that the permissions are granted when the rule is published. What should you do? A. Set the Permissions to Use the following permissions as proposed permissions. B. Set the Permissions to Use following permissions as current permissions. C. Add a Resource condition to the current permissions entry for the Authenticated Users principal. D. Add a User condition to the current permissions entry for the Authenticated Users principal. Correct Answer: B To create a central access rule (see step 5 below): 1. In the left pane of the Active Directory Administrative Center, click Tree View, select Dynamic Access Control, and then click Central Access Rules. 2. Right-click Central Access Rules, click New, and then click Central Access Rule. 3. In the Name field, type Finance Documents Rule. 4. In the Target Resources section, click Edit, and in the Central Access Rule dialog box, click Add a condition. Add the following condition: [Resource] [Department] [Equals] [Value] [Finance], and then click OK. 5. In the Permissions section, select Use following permissions as current permissions, click Edit, and in the Advanced Security Settings for Permissions dialog box click Add. Note (not A): Use the following permissions as proposed permissions option lets you create the policy in staging. 6 .In the Permission entry for Permissions dialog box, click Select a principal, type Authenticated Users, and then click OK. Incorrect Answers: A: Proposed permissions enable an administrator to more accurately model the impact of potential changes to access control settings without actually changing them.
QUESTION 6 Your network contains an Active Directory domain named contoso.com. A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof of concept was complete, the Active Directory Rights Management Services server role was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMS SCP. Which tool should you use? A. Services B. Authorization Manager C. Active Directory Sites and Services D. TMP Management E. Active Directory Users and Computers F. Active Directory Domains and Trusts Correct Answer: C References: https://kb.watchfulsoftware.com/pages/viewpage.action?pageId=1999181
QUESTION 7 You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. Shadow copies are enabled on all volumes. You need to delete a specific shadow copy. The solution must minimize server downtime. Which tool should you use? A. Shadow B. Vssadmin C. Wbadmin D. Diskpart Correct Answer: B References: https://technet.microsoft.com/en-us/library/cc754968(v=ws.11).aspx
QUESTION 8 Which of the following CA types must be deployed on domain-joined computers? A. Enterprise root B. Enterprise subordinate C. Standalone root D. Standalone subordinate Correct Answer: AB
QUESTION 9 Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use? A. Ntdsutil B. Repadmin C. Dnslint D. Active Directory Domains and Trusts Correct Answer: B If you see questions about AD Replication, First preference is AD sites and services, then Repadmin and then DNSLINT.
QUESTION 10 You work as an administrator at contoso.com. Contoso.com network consists of a single domain named contoso.com. All servers on the contoso.com network have Windows Server 2012 R2 installed. Contoso.com has a server, named SERVER1, which has the AD DS, DHCP and DNS server roles installed. Contoso.com also has a server named SERVER2, which has the DHCP and Remote Access Server Role installed. You have configured a server,which has the File and Storage Services Server role installed.to automatically acquire an IP address. The server is named Server3. You then create a filter on SERVER1. Which of the following is a reason for this configuration? A. To make sure that SERVER1 issues Server3 an IP address. B. To make sure that SERVER1 does not issue SERVER3 an IP address C. To make sure that SERVER3 acquires a constant IP address from SERVER2 only. D. To make sure that SERVER3 is configured with a static IP address Correct Answer: B Deny Filter would not allow SERVER1 to issue SERVER3 an IP
QUESTION 11 Your network contains two Active Directory forests named contoso.com and litwareinc.com. A two-way forest trusts exists between the forest. Selective authentication is enabled on the trust. The contoso.com forest contains a server named Server1. You need to ensure that users in litwareinc.com can access resources on Server1. What should you do? A. Install Active Directory Rights Management Services on a domain controller in contoso.com. B. Modify the permission on the Server1 computer account. C. Install Active Directory Rights Management Services on a domain controller in litwareinc.com. D. Configure SID filtering on the trust. Correct Answer: B Selective authentication between forests If you decide to set selective authentication on an incoming forest trust, you need to manually assign permissions on each computer in the domain as well as the resources to which you want users in the second forest to have access. To do this, set a control access right Allowed to authenticate on the computer object that hosts the resource in Active Directory Users and Computers in the second forest. Then, allow user or group access to the particular resources you want to share. Reference: Accessing resources across forests
QUESTION 12 You have a server named Server1 that runs Windows Server 2012 R2. Server1 fails. You identify that the master boot record (MBR) is corrupt. You need to repair the MBR. Which tool should you use? A. Bcdedit B. Bcdboot C. Bootrec D. Fixmbr Correct Answer: C Repairing an unbootable Windows installation with bootrec.exe If the boot/recovery partition is corrupted or lost, you can modify your Windows OS partition to boot. Boot from your Windows Vista/7/Server2008/R2/2012 media and choose the “Repair Windows” option. Open the command prompt. Using diskpart, mark your Windows partition as bootable. If your windows partition does not have it, copy the “boot” folder from the installation media. Run the following commands: >c: >cd boot >attrib bcd -s -h -r >ren c:\boot\bcd bcd.old >bootrec /RebuildBcd Reboot and Windows should boot normally. If not, return to the command prompt and run: >bootrec /FixMBR >bootrec /FixBoot Incorrect Answers: A: BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows B: The BCDboot tool is a command-line tool that enables you to manage system partition files D: Fixmbr is not a tool. Fixmbr is an option when using the bootrec tool. References: Windows BCD Store http://www.itsgotme.com/wiki/Windows_BCD
QUESTION 13 Note: This question is part of series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question. Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.
You need ensure that all Active Directory changes are replicated to all of the domain controllers in the forest within 30 minutes. What should you use? A. Set-ADSite B. Set-ADReplicationSite C. Set-ADDomain D. Set-ADReplicationSiteLink E. Set-ADGroup F. Set-ADForest G. Netdom Correct Answer: D This command gets all the site links in the directory with replication frequency greater than or equal to 60minutes, and then sets the Cost property on these sitelink objects to 200. References: https://technet.microsoft.com/en-us/%5Clibrary/Hh852257(v=WPS.630).aspx
Follow us! We update the latest effective exam dumps throughout the year to help you improve your skills! Microsoft Windows Server 2012 70-412 dumps share for free! Easy via 70-412 exam: https://www.pass4itsure.com/70-412.html (Q&As: 450)
Pass4itsure Promo Code 15% Off
Why Choose Pass4itsure?
Pass4itsure is the best provider of IT learning materials and the right choice for you to prepare for the Microsoft 70-412 exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. Pass4itsure provides the latest real questions and answers with the lowest prices, help you pass the 70-412 exam easily at first try.
Maybe you might like the exam questions and answers