Cisco 300-425 Exam Dumps Publishes | The Most Powerful 300-425 ENWLSD Learn Materials

powerful 300-425 ENWLSD learning materials

The powerful 300-425 ENWLSD learn materials can help solve many problems, such as passing the exam with maximum benefits. Today we released 300-425 exam dumps for you the most powerful’s 300-425 ENWLSD learn materials can help you achieve CCNP Enterprise certification.

Cisco 300-425 exam dumps from the Pass4itSure family have released 120 brand new exam practice questions and answers, Q&A with PDF files and VCE software, download Cisco 300-425 dumps address: https://www.pass4itsure.com/300-425.html

The newly released 300-425 exam dumps are really powerful learning material for you to pass the 300-425 ENWLSD exam.

What do you think of the Cisco CCNP 300-425 exam?

Abbreviation: 300-425 ENWLSD
Full Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
Exam time: 90 minutes
Languages: English and Japanese
Cost: $300
Certification: CCNP Enterprise (Prove your skills with Enterprise networking solutions)
Other:
To earn CCNP Enterprise certification, you need to pass two exams: a core exam (350-401 ENCOR) and an enterprise concentration exam of your choice (one of six). The 300-425 exam happens to be one of the concentrated exams.

There are 6 enterprise concentration exams you need to know:

The above are the basic knowledge points of the exam, you need to know.

Designing Cisco Enterprise Wireless Networks (ENWLSD) exam learn resources:

The official ones are:
Designing Cisco Enterprise Wireless Networks (ENWLSD)

Powerful study material: Pass4itSure 300-425 exam dumps

How do I plan to prepare for the ENWLSD exam 300-425?

Download the Pass4itSure 300-425 exam dumps (learn material)
Practice all the questions in the 300-425 dumps
Take the ENWLSD exam 300-425
Finally, you will be notified that you succeeded

[2022.7] Newly released 300-425 free exam questions:

QUESTION # 1

An engineer performs a Layer 1 survey by using the Metegeek analyzer only on the current operating channel. Which
the operating mode is configured for a Cisco CleanAir AP?

A. Local
B. Sniffer
C. Monitor
D. SE-connect

Correct Answer: A

Reference:

QUESTION # 2

An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise
wireless network that currently leverages three wireless LAN controllers. Which architecture should the engineer
deploy?

A. N+1 solution without SS0
B. N+1 with SSO
C. N+N solution without SSO
D. N+N with SSO

Correct Answer: B

Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deploy
ment_Guide/N1_HA_Overview.html?

QUESTION # 3

A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design
to encourage clients to use the 5 GHz spectrum?

A. RRM
B. Cisco centralized key management
C. Band select
D. Load balancing

Correct Answer: C

QUESTION # 4

An engineer changed the TPC Power Threshold for wireless deployment from the default value to 65 dBm. The
engineer conducts a new post-deployment Survey to validate the results What is the expected outcome?

A. Increase cell size
B. Decreased client signal strength
C. Increased received sensitivity
D. Decreased channel overlap

Correct Answer: B

QUESTION # 5

During a post-deployment site Survey, issues are found with non-wi-Fi interference. What should the engineer use to
identify the source of the Interference?

A. Network analysis module
B. Wireless intrusion prevention
C. Wireshark
D. Cisco spectrum expert

Correct Answer: D

QUESTION # 6

A customer called with a requirement that internal clients must be on different subnets depending on the building they
are in, AH access points are operating in local mode and will not be modified, and this is a single controller solution.
Which design approach creates the desired result?

A. Create an SSID, place it to the desired VLAN under WLANs, and configure 802 lx in ISE to assign the correct VLAN
based on the SSID from which the client is authenticating.
B. Create FlexConnecI groups, place the access points in. and set the correct VLAN to SSID mapping based on
location.
C. Create AP groups for each desired location, map the correct VLANs to the internal SSID and add the access points
for that location.
D. Create mobility anchors for the SSID, and on the controller under the internal SSID. create a foreign map to the
desired VLAN based on location.

Correct Answer: C

QUESTION # 7

A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds
that the redundancy management heartbeat is failing. Which packet type must be filtered for heartbeats when taking a
capture to verify communication?

A. RSTP
B. UDP
C. TOP
D. ICMP

Correct Answer: B

QUESTION # 8

Why is 802.11a connectivity reduced in an X-ray room?

A. X-rays create significant non-Wi-Fi interference on the 802.11a band.
B. X-rays impact the 802,11a UNll-2 channels that cause access points to dynamically change channels.
C. X-rays within these rooms cause multipath issues.
D. X-ray rooms exhibit increased signal attenuation.

Correct Answer: A

QUESTION # 9

Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of
controllers are up and connected?

A. rping
B. ping
C. eping
D. mping

Correct Answer: B

Reference:

QUESTION # 10

A network engineer is working on a predictive WLAN design, the new wireless network must support access to the Internet,
email, voice, and the inventory database, to successfully support these services, which configuration must the engineer
use for the signal strength levels and SNR on the planning tool?

A. signal strength of 67 dBm, 25-dB SNR, and maximum 1 percent packet loss.
B. signal strength of 67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.
C. signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.
D. signal strength of 70 dBm,30-dB SNR., and maximum 10 percent packet loss.

Correct Answer: A

https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057site-survey-guidelineswlan-00.html

QUESTION # 11

A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which
two elements have a negative effect on wireless users? (Choose two.)

A. wireless channels
B. access point height
C. client authentication
D. client authorization
E. absorption

Correct Answer: BE

Reference: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.ht
ml#_Toc309331086

QUESTION # 12

An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The
engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods
allow access to the standby unit? (Choose two.)

A. via the console connection
B. SSH to the redundancy management interface of the primary WLC
C. SSH to the service port interface
D. SSH to the virtual interface of the secondary WLC
E. SSH to the management interface of the primary WLC

Correct Answer: AC

Reference:

QUESTION # 13

A customer is looking for a network design with Cisco Hyperloctation using AP4800 for location tracking via a custom
mobile app Issues appeared in the past with refresh rates for location updates. What needs to be implemented to meet
these requirements?

A. Cisco CMX SDK in the location app
B. redundant CMX and fetch location in round-robin fashion.
C. device Bluetooth via the app
D. Cisco FastLocate technology

Correct Answer: D

Download free 300-425 dumps online: https://drive.google.com/file/d/1Z5KGXyECHVCtfj6xR_-5d1z3iY9IpWsz/view?usp=sharing

[Updated in 2022.6] free 300-425 exam questions: https://www.exampass.net/300-425-dumps-new-nersion-valid-cisco-enwlsd-300-425-preparation-material.html

More full 300-425 exam questions are here.

Continue Reading