100% Pass Rate 70-412 Exam New Microsoft Guide Configuring Advanced Microsoft Windows Server 2012 Services

Are you studying for the Microsoft 70-412 exam?  I presented the 70-412 Exam Prep session at Pass4itsure and the session is now available online.  If you are planning to take the exam, it would be worth the 75 minutes to check it out.  This session also covers part of the 070-412 exam.

Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 Services
Updated: Apr 04, 2017
Q&As: 424

The MCSE Desktop Infrastructure certification validates your skills in desktop virtualization, remote desktop services and application virtualization. Show that you can deploy and manage desktops and devices that provide 70-412 exam access from anywhere, while maintaining security and compliance.

70-412 exam

Pass4itsure Latest and Most Accurate Microsoft 70-412 Exam Q&As   

QUESTION 11
The CEC is revised every four years.
A. True
B. False

Correct Answer: A QUESTION 12
Which of the following is the standard for “Recommended Practice for Installation Design and Installation of Valve Regulated Lead-Acid Storage Batteries for Stationary Applications”?
A. ANSI/IEEE C62.41
B. ANSI/IEEE C62.45
C. ANSI/IEEE P1188-1996
D. ANSI/IEEE P1187-1996
Correct Answer: D QUESTION 13
For design purposes, which of the following would be the typical size range of a 4-pair 100 ohm UTP or ScTP (FTP) cable?
A. .50 in to .75 in
B. .14 in to .25 in
C. .31 in to .43 in
D. .11 in to .18 in

Correct Answer: B QUESTION 14
In what year was the TIA formed?
A. 1985
B. 1965
C. 1958
D. 1956
Correct Answer: A QUESTION 15
In an “underfloor duct system”, the distribution ducts carry cables from the TR to the feeder ducts.
A. False
B. True

Correct Answer: A QUESTION 16
What is the standard floor space allocation used in an office environment for one individual work area?
A. 100 square feet.
B. 50 square feet.
C. 150 square feet.
D. 75 square feet.

Correct Answer: A

352-001 pdf  QUESTION 17
NRZ is the acronym for which of the following?
A. Non-return to zero.
B. Nominal return zone.
C. Network registration zone.
D. Normal return zone. Correct Answer: A
QUESTION 18
Which of the following is the international standard for premises cabling?
A. ISO/IEC 18010
B. ISO/IEC 11801
Correct Answer: B QUESTION 19
The inadvertent transposition of two conductors of separate pairs is called what?
A. Twisted pair
B. Transposed pairs
C. Reversed pair
D. Split pair

Correct Answer: D QUESTION 20
A “wye” is a power system in which only one point is grounded.
A. False
B. True

Correct Answer: B QUESTION 21
Improper grounding of telecommunications pathways may increase susceptibility of EMI.
A. True
B. False

Correct Answer: A

QUESTION 23
A “sag” is a decrease in normal root mean square (rms) voltage or current lasting 0.5 cycles up to one minute.
A. False
B. True

Correct Answer: B QUESTION 24
Which of the following is an address used to uniquely identify each device on a LAN with an address coded in the network interface card?
A. MAC
B. TCP
C. IP
D. Physical Layer
Correct Answer: A QUESTION 25
In what year was BICSI formally incorporated?
A. 1977
B. 1984

C. 1967
D. 1940

Correct Answer: A

70-412 exam

Pass4itsure technical expert highly recommend that you buy this Microsoft 70-412 exam Q&A and Preparation Materials value pack. In order that candidates will better grasp the Microsoft 70-412 exam knowledge, our technical experts outline the examination topics and compile a set of Pass4itsure Preparation Materials, which not only covers all the main and important Microsoft exam, but also adds some sample questions and analysis of related certification.

For more 70-412 exam  self-guided learnings on other Microsoft products, you can go to Pass4itsure.com. There are a couple of new exciting Windows Server 2012 courses just added. If you are a travelling user and if enjoy doing some self-guided Windows Server 2012 hands-on labs in an “Anytime, Anywhere” basis, you can try out the Windows Server 2012 virtual labs at https://www.pass4itsure.com/70-412.html. They are cool and awesome, enjoy!

Continue Reading

Guaranteed 100% Pass Microsoft 70-417 Exam

70-417 Exam

QUESTION 90
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

You install Windows Server 2012 on VM2 by using Windows Deployment Services (WDS).
You need to ensure that the next time. VM2 restarts, you can connect to the WDS server by using PXE.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Correct Answer: G Explanation
Explanation/Reference:
Explanation:
G. Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first.

QUESTION 91
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.

You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the Windows PowerShell 2.0 engine on DC1.
B. Install Microsoft .NET Framework 4 on DC2.
C. Install Windows Management Framework 3.0 on DC2.
D. Install Remote Server Administration Tools on DC1.
E. Install Remote Server Administration Tools on DC2.

Correct Answer: BC Explanation
Explanation/Reference:
Explanation:
In Windows Server 2012, you can use Server Manager to perform management tasks on remote servers.
Remote management is enabled by default on servers that are running Windows Server 2012. To manage
a server remotely by using Server Manager, you add the server to the Server Manager server pool.
You can use Server Manager to manage remote servers that are running Windows Server 2008 and
Windows Server 2008 R2, but the following updates are required to fully manage these older operating
systems.
Windows Management Framework 3.0 To use this release of Server Manager to access and manage
remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install
.NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers.

Reference:
Training Guide: Installing and Configuring Windows Server 2012, Chapter 2: Deploying servers, p. 80

QUESTION 92
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2.
Which command should you run from Server1?
A. netstat> server2
B. winrm get server2
C. winrs -r:server2netstat
D. dsquery * -scope base -attrip,server2

Correct Answer: C Explanation
Explanation/Reference:
Explanation:
This command line tool enables administrators to remotely execute most Cmd.exe commands using the
WSManagement protocol.

References:
QUESTION 93
Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Corel, you perform a Server Core Installation of Windows Server 2012 R2. You join Corel to the adatum.com domain.
You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1. What should you do on Core1?
A. Run the Enable-NetFirewallRulecmdlet.
B. Run the Disable-NetFirewallRulecmdlet.
C. Install Remote Server Administration Tools (RSAT).
D. Install Windows Management Framework. Correct Answer: A

Explanation Explanation/Reference:
QUESTION 94
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2012. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you
click View script.

You need to ensure that you can use the script to promote Server1 to a domain controller. Which file extension should you use to save the script?
A. .bat
B. .ps1
C. .xml

D. .cmd Correct Answer: B
Explanation Explanation/Reference:
Explanation: A PowerShell script is the equivalent of a Windows CMD or MS-DOS batch file, the file should be saved with a .ps1 extension, e.g. MyScript.ps1

QUESTION 95
In an isolated test environment, you deploy a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. The test environment does not have Active Directory Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?

A. Install-ADDSDomain
B. Install-ADDSForest
C. Install-ADDSDomainController
D. Install-WindowsFeature Correct Answer: B

Explanation Explanation/Reference:
Explanation: Install-ADDSDomainController Installs a domain controller in Active Directory. Install- ADDSDomain Installs a new Active Directory domain configuration. Install-ADDSForest Installs a new Active Directory forest configuration. Install-WindowsFeature Installs one or more Windows Server roles, role services, or features on either thelocal or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to andreplaces Add- WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode Win2008 -ForestMode Win2008R2 -DatabasePath “d:\NTDS” -SysvolPath “d:\SYSVOL” LogPath “e:\Logs”Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, setsdomain functional level to Windows Server 2008 R2 and sets forest functional level to Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive andhas the server automatically restart after AD DS installation is complete and prompts the user to provide andconfirm the Directory Services Restore Mode (DSRM) password.

Flydumps Free  Microsoft 70-417 exam dumps are audited by our certified subject matter experts and published authors for development. Flydumps  Microsoft 70-417 exam dumps are one of the highest quality  Microsoft 70-417 Q&As in the world.It covers nearly 96% real questions and answers, including the entire testing scope. Flydumps guarantees you pass  Microsoft 70-417 exam at first attempt.

70-417 exam

Read More: https://www.work2you.org/ibm-c2020-703-exam-questions-and-answers-100-free-vce-files/

Continue Reading