3Com 3M0-331 Certification, Valid and updated 3Com 3M0-331 Exam Is Your Best Choice

Welcome to download the newest Pass4itsure 350-029 VCE dumps: http://www.examwind.com/350-029.html

Most accurate The 3Com 3M0-331 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of 3Com 3M0-331.We provide our customers with the excellent 7×24 hours customer service.We have the most professional 3Com 3M0-331 expert team to back up our grate quality products.If you still cannot make your decision on purchasing our product, please try our 3Com 3M0-331 free pdf practice test for you to free download.3Com 3M0-331 is also an authenticated IT certifications site that offer all the new questions and answers timely.Visit the site Flydumps.com to get free 3Com 3M0-331 VCE test engine and PDF.

QUESTION 91
In V2.x code on a 3Com 5000 or 6000 series router with firewall enabled, what happens when exact packet matching for fragments is enabled?
A. L3 information is recorded for all fragments
B. L3 information is recorded for first fragments
C. Non-L3 information is recorded for all fragments
D. Non-L3 information is recorded for first fragments

Correct Answer: D
QUESTION 92
Which three are benefits provided by Open Shortest Path First (OSPF) compared to Routing Information Protocol (RIP)? (Choose three.)
A. Greater network scalability
B. Performs faster network convergence
C. Supports a single routing path for faster packet routing
D. Forwards entire routing table for greater network efficiency
E. Supports unlimited number of hop counts for larger networks
Correct Answer: ABE
QUESTION 93
What is the maximum number of hops supported by Routing Information Protocol (RIP)?
A. 8
B. 15
C. 64
D. 128
E. 255
Correct Answer: B
QUESTION 94
3COM 5000/6000 routers support which two multicast routing protocols? (Choose two.)
A. PIM-SM
B. PIM-DM
C. DVMRP
D. MOSPF
E. MBONE

Correct Answer: AB
QUESTION 95
Which two are security features supported on the Router 5000/6000 series? (Choose two.)
A. Access Control Lists (ACL)
B. De-militarized Zone (DMZ) Firewall
C. IPSec with MD5, SHA1, 3DES and AES
D. Session Security Synchronization (SSS)
E. Point-to-Point Tunneling Protocol (PPTP)

Correct Answer: AC
QUESTION 96
Which three Quality of Service (QoS) features are supported on the Router 5000/6000 series? (Choose three.)
A. Priority queuing (PQ)
B. Last in First Out (LIFO)
C. Committed access rate (CAR)
D. Explicit Congestion Notification (ECN)
E. Weighted random early detect (WRED)

Correct Answer: ACE
QUESTION 97
Which 3COM router supports both SIC and MIM modules?
A. 4300
B. 5012
C. 5682
D. 6040
E. 6080

Correct Answer: B
QUESTION 98
What are two features of the Backup Center function on the Router 5000 series? (Choose two.)
A. Allows a console port to be configured as a failover backup
B. Allows any WAN interface to be configured as a failover backup
C. Can provide additional bandwidth via load sharing on the primary link interface
D. Can automatically reconfigure an unused-physical interface to dynamically backup a link
E. Allows two Router 5000 units in the same physical location to provide backup in case one router fails

Correct Answer: BC
QUESTION 99
Which two commands are required to output RIP debugging information to the 3COM router (software version 2.x) console? (Choose two.)
A. [Router] Rip debug start
B. <Router>terminal debugging
C. <Router> debugging rip packet
D. <Router-console> debug enable
E. <Router> enable debugging channel 1

Correct Answer: BC
QUESTION 100
Which four protocols are supported by the Router 3000 family? (Choose four.)
A. IP
B. Open Shortest Path First (OSPF)
C. Internetwork Packet Exchange (IPX)
D. Border Gateway Protocol 4 (BGP-4)
E. Point-to-Point Tunneling Protocol (PPTP)
F. Distance Vector Multicast Routing Protocol (DVMRP)

Correct Answer: ABCD
QUESTION 101
With software version 2.x, which command enables multicast routing for the entire router?
A. <RTA> igmp version 1
B. <RTA> PIM DM enable
C. [RTA-Ethernet0/0/0] PIM DM
D. [RTA] multicast routing-enable
E. [RTA-Ethernet0/0/0] igmp version 1

Correct Answer: D
QUESTION 102
Which three are IP Multicasting advantages? (Choose three.)
A. Provides network congestion control for timely delivery of data
B. Optimizes performance and eliminates redundant network traffic
C. Uses TCP connection-oriented transmissions for reliable packet delivery
D. Makes efficient use of network bandwidth as the number of participants expands
E. Enables simultaneous delivery of information to many receivers without producing multiple copies of the same data

Correct Answer: BDE
QUESTION 103
Which protocol, supported on the 3Com Router 5000/6000 series, should be used when the router has to send heavy amounts of traffic to different multicast groups?
A. MOSPF
B. IP Unicast
C. Internet Group Management Protocol (IGMP)
D. Distance-Vector Multicast Protocol (DVRMP)
E. Protocol Independent Multicast-Dense Mode (PIM-DM)
Correct Answer: E
QUESTION 104
Which three are characteristics of xDSL technology? (Choose three.)
A. It can transfer data at speeds up to 30 Mbps
B. It converts existing twisted pair telephone lines into high-speed data paths
C. It simultaneously provides high-speed data and Plain Old Telephone Service (POTS)
D. It uses the same packet/frame format as Ethernet, which makes it ideal for LAN to WAN access
E. The speed of an xDSL service depends on the thickness of copper wire and the distance from the telco Central Office (CO)

Correct Answer: BCE QUESTION 105
Which three are characteristics of a router? (Choose three.)
A. Forwards packets between networks
B. Connects only networks of similar types
C. Finds the best path from one network to another network
D. Works at Layer 4, the Transport Layer according to the OSI model
E. Connects networks into physically unified internetworks, with each network retaining its own identity

Correct Answer: ACE QUESTION 106
Which three are characteristics of Point-to-Point (PPP) protocol? (Choose three.)
A. PPP is a Layer 2 Data Link protocol
B. PPP supports only asynchronous links
C. Options are available for providing authentication for security
D. PPP is less capable than Serial Line Internet Protocol (SLIP)
E. PPP is extensively used today, i.e., for modem dial-up connections to an Internet Service Provider (ISP)

Correct Answer: ACE QUESTION 107
Click the Exhibit button. The diagram shows the mechanism for which PPP protocol?

A. RIP
B. LCP
C. PAP
D. NCP
E. CHAP

Correct Answer: E
QUESTION 108
What is the speed of a digital data service (DDS) operating at the digital signal level 0 (DS0)?
A. T1/E1
B. 2,400 bps
C. 56/64 kbps
D. 155 mbps

Correct Answer: C
QUESTION 109
Click the Exhibit button. In the Frame relay interface configuration shown, which command is unnecessary?

A. fr dlci 20.
B. link-protocol fr.
C. fr interface-type dce
D. fr map ip 192.0.0.1 20.
E. ip address 192.0.0.2 255.255.255.0.

Correct Answer: D

Flydumps.com new 3Com 3M0-331 study guides that you use have been rigorously tested by International experts. Choose Flydumps both save your time and money. And our products will satisfy you.

Examwind 350-029 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/350-029.html

Continue Reading

3Com 3M0-331 Certificate, Help To Pass 3Com 3M0-331 Test Software Guaranteed Success

Welcome to download the newest Pass4itsure 200-101 VCE dumps: http://www.examwind.com/200-101.html

100% Pass Guarantee You can download free 3Com 3M0-331 exam dumps with all new added questions and answers from Flydumps.com.With our 3Com 3M0-331 exam questions and answers in hand,a lot candidates pass the 3Com 3M0-331 exam at their first time. We make our promise that Flydumps is your best choice.

QUESTION 90
In V2.x code on a 3Com 5000 or 6000 series router, if the firewall is enabled, which packet is NOT inspected by default?
A. Non-fragments
B. First fragments
C. Non-first fragments

Correct Answer: C
QUESTION 91
In V2.x code on a 3Com 5000 or 6000 series router with firewall enabled, what happens when exact packet matching for fragments is enabled?
A. L3 information is recorded for all fragments
B. L3 information is recorded for first fragments
C. Non-L3 information is recorded for all fragments
D. Non-L3 information is recorded for first fragments

Correct Answer: D
QUESTION 92
Which three are benefits provided by Open Shortest Path First (OSPF) compared to Routing Information Protocol (RIP)? (Choose three.)
A. Greater network scalability
B. Performs faster network convergence
C. Supports a single routing path for faster packet routing
D. Forwards entire routing table for greater network efficiency
E. Supports unlimited number of hop counts for larger networks
Correct Answer: ABE
QUESTION 93
What is the maximum number of hops supported by Routing Information Protocol (RIP)?
A. 8
B. 15
C. 64
D. 128
E. 255
Correct Answer: B
QUESTION 94
3COM 5000/6000 routers support which two multicast routing protocols? (Choose two.)
A. PIM-SM
B. PIM-DM
C. DVMRP
D. MOSPF
E. MBONE

Correct Answer: AB
QUESTION 95
Which two are security features supported on the Router 5000/6000 series? (Choose two.)
A. Access Control Lists (ACL)
B. De-militarized Zone (DMZ) Firewall
C. IPSec with MD5, SHA1, 3DES and AES
D. Session Security Synchronization (SSS)
E. Point-to-Point Tunneling Protocol (PPTP)

Correct Answer: AC
QUESTION 96
Which three Quality of Service (QoS) features are supported on the Router 5000/6000 series? (Choose three.)
A. Priority queuing (PQ)
B. Last in First Out (LIFO)
C. Committed access rate (CAR)
D. Explicit Congestion Notification (ECN)
E. Weighted random early detect (WRED)

Correct Answer: ACE
QUESTION 97
Which 3COM router supports both SIC and MIM modules?
A. 4300
B. 5012
C. 5682
D. 6040
E. 6080

Correct Answer: B
QUESTION 98
What are two features of the Backup Center function on the Router 5000 series? (Choose two.)
A. Allows a console port to be configured as a failover backup
B. Allows any WAN interface to be configured as a failover backup
C. Can provide additional bandwidth via load sharing on the primary link interface
D. Can automatically reconfigure an unused-physical interface to dynamically backup a link
E. Allows two Router 5000 units in the same physical location to provide backup in case one router fails

Correct Answer: BC
QUESTION 99
Which two commands are required to output RIP debugging information to the 3COM router (software version 2.x) console? (Choose two.)
A. [Router] Rip debug start
B. <Router>terminal debugging
C. <Router> debugging rip packet
D. <Router-console> debug enable
E. <Router> enable debugging channel 1

Correct Answer: BC
QUESTION 100
Which four protocols are supported by the Router 3000 family? (Choose four.)
A. IP
B. Open Shortest Path First (OSPF)
C. Internetwork Packet Exchange (IPX)
D. Border Gateway Protocol 4 (BGP-4)
E. Point-to-Point Tunneling Protocol (PPTP)
F. Distance Vector Multicast Routing Protocol (DVMRP)

Correct Answer: ABCD
QUESTION 101
With software version 2.x, which command enables multicast routing for the entire router?
A. <RTA> igmp version 1
B. <RTA> PIM DM enable
C. [RTA-Ethernet0/0/0] PIM DM
D. [RTA] multicast routing-enable
E. [RTA-Ethernet0/0/0] igmp version 1

Correct Answer: D
QUESTION 102
Which three are IP Multicasting advantages? (Choose three.)
A. Provides network congestion control for timely delivery of data
B. Optimizes performance and eliminates redundant network traffic
C. Uses TCP connection-oriented transmissions for reliable packet delivery
D. Makes efficient use of network bandwidth as the number of participants expands
E. Enables simultaneous delivery of information to many receivers without producing multiple copies of the same data

Correct Answer: BDE
QUESTION 103
Which protocol, supported on the 3Com Router 5000/6000 series, should be used when the router has to send heavy amounts of traffic to different multicast groups?
A. MOSPF
B. IP Unicast
C. Internet Group Management Protocol (IGMP)
D. Distance-Vector Multicast Protocol (DVRMP)
E. Protocol Independent Multicast-Dense Mode (PIM-DM)
Correct Answer: E
QUESTION 104
Which three are characteristics of xDSL technology? (Choose three.)
A. It can transfer data at speeds up to 30 Mbps
B. It converts existing twisted pair telephone lines into high-speed data paths
C. It simultaneously provides high-speed data and Plain Old Telephone Service (POTS)
D. It uses the same packet/frame format as Ethernet, which makes it ideal for LAN to WAN access
E. The speed of an xDSL service depends on the thickness of copper wire and the distance from the telco Central Office (CO)

Correct Answer: BCE QUESTION 105
Which three are characteristics of a router? (Choose three.)
A. Forwards packets between networks
B. Connects only networks of similar types
C. Finds the best path from one network to another network
D. Works at Layer 4, the Transport Layer according to the OSI model
E. Connects networks into physically unified internetworks, with each network retaining its own identity

Correct Answer: ACE QUESTION 106
Which three are characteristics of Point-to-Point (PPP) protocol? (Choose three.)
A. PPP is a Layer 2 Data Link protocol
B. PPP supports only asynchronous links
C. Options are available for providing authentication for security
D. PPP is less capable than Serial Line Internet Protocol (SLIP)
E. PPP is extensively used today, i.e., for modem dial-up connections to an Internet Service Provider (ISP)

Correct Answer: ACE QUESTION 107
Click the Exhibit button. The diagram shows the mechanism for which PPP protocol?

A. RIP
B. LCP
C. PAP
D. NCP
E. CHAP

Correct Answer: E
QUESTION 108
What is the speed of a digital data service (DDS) operating at the digital signal level 0 (DS0)?
A. T1/E1
B. 2,400 bps
C. 56/64 kbps
D. 155 mbps

Correct Answer: C
QUESTION 109
Click the Exhibit button. In the Frame relay interface configuration shown, which command is unnecessary?

A. fr dlci 20.
B. link-protocol fr.
C. fr interface-type dce
D. fr map ip 192.0.0.1 20.
E. ip address 192.0.0.2 255.255.255.0.

Correct Answer: D
QUESTION 110
What OSI layer do routers operate at in the OSI model?
A. Session
B. Network
C. Physical
D. Data Link
E. Transport
F. Application

Correct Answer: B
QUESTION 111
Which two statements correctly describe how the two dialer backup methods work? (Choose two.)
A. Dialer Listen backup monitors changes in the routing table
B. Circular DCC backup monitors changes in the routing table
C. Dialer Listen backup monitors packets on the main interface
D. Circular DCC backup monitors packets on the main interface
Correct Answer: AD
QUESTION 112
Dialer Backup can be configured using Circular DCC, but not using Resource-Shared DCC
A. True
B. False
Correct Answer: A
QUESTION 113
Dialer Listen backup works with static and dynamic routing.
A. True
B. False

Correct Answer: B
QUESTION 114
Which three are features of IP Security (IPSec)? (Choose three.)
A. Is a Layer 2 Virtual Private network (VPN) protocol
B. Is a Layer 3 Virtual Private network (VPN) protocol
C. Can transport IP, IPX, AppleTalk and other protocols
D. Supports two security modes: tunneling and transport mode
E. Requires Point-to-Point Protocol (PPP) as a transport protocol
F. Consists of three protocols: Authentication Header, Encapsulation Security Payload, and Internet Key Exchange

Correct Answer: BDF
QUESTION 115
What is the key technology used by routers to filter IP data packets to or from the Internet?
A. IP Security (IPSec)
B. Access control lists (ACL)
C. Virtual Private Network (VPN)
D. Layer 2 Tunneling Protocol (L2TP)

Correct Answer: B
QUESTION 116
What is the bandwidth of an OC-3 connection?
A. 10 Mbps
B. 100 Mbps
C. 155 Mbps
D. 300 Mbps
E. 1024 Mbps
Correct Answer: C
QUESTION 117
Which is the correct ATM hierarchy?
A. Physical Paths contain Virtual Channels which contain Virtual Paths
B. Physical Paths contain Virtual Paths which contain Virtual Channels
C. Virtual Paths contain Virtual Channels, which contain Physical Paths
D. Virtual Channels contain Virtual Paths, which contain Physical Paths
Correct Answer: B
QUESTION 118
Which type of Virtual Circuits does the Router 6000 family support?
A. PVCs only
B. SVCs only
C. PVCs and SVCs

Correct Answer: A
QUESTION 119
What is the correct order of attribute comparison for local BGP route selection?
A. AS path, then local preference, then origin type, then MED value
B. MED value, then origin type, then local preference, then AS path
C. Origin type, then MED value, then local preference, then AS path
D. Local preference, then AS path, then origin type, then MED value

Correct Answer: D
QUESTION 120
Which two are true statements of BGP Route Reflection? (Choose two.)
A. There can be no more than one Router Reflector in an Autonomous System
B. Route Reflection allows all I-BGP routers to re-advertise routes obtained from I-BGP peers
C. Without Route Reflection, all BGP routers in an Autonomous System must be fully-meshed
D. Route Reflection allows all E-BGP routers to re-advertise routes obtained from I-BGP peers
E. Route Reflection allows some I-BGP routers to re-advertise routes obtained from I-BGP peers
F. Route Reflection allows some E-BGP routers to re-advertise routes obtained from I-BGP peers

Correct Answer: CE

Get yourself composed for Microsoft actual exam and upgrade your skills with Flydumps 3Com 3M0-331 practice test products. Once you have practiced through our assessment material, familiarity on 3Com 3M0-331 exam domains get a significant boost. Flydumps practice tests enable you to raise your performance level and assure the guaranteed success for 3Com 3M0-331 exam.

Examwind 200-101 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/200-101.html

Continue Reading

Cisco 642-427 Cert, First-hand Cisco 642-427 Study Material For Download

ATTENTION: Get your Cisco 642-427 certification easily with,Flydumps latest Cisco 642-427 exam dumps. All the up-to-date questions and answers were added to the new version.Go to the site Flydumps.com to get more Cisco 642-427 exam
information.

QUESTION 1
Where does an IP phone obtain the extension number and speed-dial settings from?
A. the settings that are configured on the physical phone
B. the registration file that the phone receives from the Cisco Unified Communications Manager
C. the device and line configuration in Cisco Unified Communications Manager, during the registration process
D. the default device profile that is configured in Cisco Unified Communications, Manager

Correct Answer: C QUESTION 2
Which web-based application that is accessed via the Cisco Unified Communications Manager Administration GUI generates reports for troubleshooting or inspecting cluster data?
A. Cisco Unified Serviceability alarms
B. Cisco Unified RTMT Trace and Log Central
C. Cisco Unified RTMT Monitor
D. Cisco Unified Reporting tool

Correct Answer: D QUESTION 3
Which statement about device mobility is true?
A. When local route groups are used, there is no need to configure device mobility groups or phone device CSSs as long as phone line CSSs are used.
B. When local route groups are used, you must configure device mobility groups and phone device CSSs.
C. When the device mobility group at the home device pool and roaming device pool are not the same, the Phone will keep the home region.
D. When device mobility groups at the home device pool and roaming device pool are the same, the phone will keep the home MRGL setting. Correct Answer: A QUESTION 4
Refer to the SDI trace in the exhibit A PSTN call arrived at the MGCP gateway that is shown in the SDI trace. If the caller ID that is displayed on the IP phone is 087071 222 and the HQ_clng pty_CSS contains the HQ_cing_pty_Pt partition, which exhibit shows the correct gateway digit manipulation”?

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

100% Real Q&As | 100% Real Pass

A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Correct Answer: D

QUESTION 5
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)
A. Cisco Unified Communications Manager RTMT tool
B. Cisco Unified Communications Manager Serviceability interface
C. Cisco Unified Reporting
D. Cisco Unified Communications Manager CLI interface
E. Cisco IP Phone Device Stats from the Settings button
F. Cisco Unified OS Administration interface
Correct Answer: ACD

QUESTION 6
Which of these reasons can cause intrasite calls within a Cisco Unified Communications Manager cluster to fail?
A. The route partition that is configured in the CCD requesting service is not listed in the calling phone CSS
B. The trunk CSS does not include the partition for the called directory number.
C. The MGCP gateway is not registered
D. The calling phone does not have the correct CSS configured
E. The calling phone does not have the correct partition configured.
Correct Answer: D
QUESTION 7
Refer to the exhibit.
100% Real Q&As | 100% Real Pass
When a Cisco IP Communicator phone roams from San Jose (SJ) to RTP, the Cisco IP Communicator physical location and the device mobility group change from SJ to RTP All route patterns are assigned a route list that points to the local route group All device pools are configured to use the local route group Which statement is true when the roaming phone places an AAR call?
A. Since globalized call routing is not configured, then the SJ gateway will be used in this case
B. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the SJ gateway
C. The phone will use the AAR CSS that contains the RTP_PSTN partition. The call will egress at the SJ gateway
D. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the RTP gateway.
E. The phone will use the AAR CSS that contains the RTP_PSTN partition The call will egress at the RTP gateway

Correct Answer: D
QUESTION 8
Refer to the exhibits.

Low latency queuing has been implemented on the HO and BR1 routers to allow five G.729 calls. Callers are still experiencing poor audio, in particular choppy and
delayed audio during traffic congestion. This problem occurs even with just one active call.
Which two actions will solve the issue?

100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
A. Change the codec type to G 711. J
B. Configure RSVP call admission control
C. Configure L ink Fragmentation and Interleave on the WAN links
D. Configure RTP header compression on the WAN links
E. Increase the priority queue bandwidth to 80 Kb/s
F. Configure location settings in Cisco Unified Communications Manager to 1 20 Kb/s
Correct Answer: CD

QUESTION 9
Refer to the exhibit.

When calling 911, which gateway/route list is defined in the route pattern in Cisco Unified Communications Manager and used to route matched digits to the PSTN?
A. SEP002290BA361B
B. standardLocalRG
C. RouteListCdrc
D. LRG_RL
E. nodeld = 1
F. BRANCH
100% Real Q&As | 100% Real Pass

Correct Answer: D

QUESTION 10
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they die happening?
A. traceroutes
B. RTMT real-time trace
C. Cisco Unified Communications Manager alerts
D. Cisco Unified Dialed Number Analyzer
E. RTMT performance log viewer
F. syslog output
Correct Answer: B

QUESTION 11
Refer to the exhibits.

MOH has been configured to run from flash at the BR1 site. The HQ phones and MOH server are placed in the Default region through the Default device pool. The
BR1 phones are placed in the BR1 region through the BR1
device pool. The region configuration between Default and BR1 only permits 729 codec.
When an IP phone user at the HQ site places a BR1 caller on hold, the BR1 caller hears tone on hold.
Which of the following can cause this issue?

100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
A. Multicast routing is not enabled on the BR1 router.
B. The command ip pim separate-dense-mode is missing from interface VLAN 120 at the SRST router in BR1.
C. The MOH server is unable to stream MOH using G.711 codec because of the regions configuration.
D. The command route 10.1.120.1 must be added to the multicast moh 239.1.1.1 port 16384 command at the SRST router in BR1.
E. The Max Hops is too small in the MOH configuration
100% Real Q&As | 100% Real Pass
Correct Answer: B

QUESTION 12
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with the subscriber as a backup server. When the user presses the settings button on the phone, only the Cisco Unified Communications Manager publisher shows as registered. What is the most likely cause for this issue?
A. The phone does not have the correct Cisco Unified Communications Manager group in the device configuration page.
B. The Cisco Unified Communications Manager group that is applied through the device pool is misconfigured.
C. The ip-helper address command for the subscriber is not configured on the switch port.
D. The subscriber does not have the correct device pool configured.
E. The enterprise phone configuration does not have the call control redundancy enabled.
Correct Answer: B

QUESTION 13
Which step in the problem-solving model is important to accurately interview end users to get all the pertinent details of the problem?
A. Implement Action Plan
B. Define the Problem
C. Consider the Possibilities
D. Create Action Plan
E. Gather Facts
F. Observe Results
G. Restart Problem-Solving Process
H. Problem Resolved
Correct Answer: E

QUESTION 14
Refer to the exhibit.

The exhibit shows the output of debug isdn q931. An inbound PSTN call was received by a SIP gateway that is reachable via a SIP trunk that is configured in Cisco Unified Communications Manager. The call failed to ring extension 3001. If the phone at extension 3001 is registered and reachable through the gateway inbound CSS, which three actions can resolve this issue? (Choose three.)
A. Change the significant digits for inbound calls to 4 on the SIP trunk configuration in Cisco Unified Communications Manager.
B. Configure the digit strip 4 on the SIP trunk under Incoming Called Party Settings in Cisco Unified Communications Manager.
C. Configure a translation pattern in Cisco Unified Communications Manager that can be accessed by the trunk CSS to truncate the called number to four digits.
D. Configure a called-party transformation CSS on the gateway in Cisco Unified Communications Manager that includes a pattern that transforms the number from ten digits to four digits.
E. Configure a voice translation profile in the SIP Cisco IOS gateway with a voice translation rule that truncates the number from ten digits to four digits.
F. Configure the Cisco IOS command num-exp 2288223001 3001 on the gateway ISDN interface.
Correct Answer: ACE

QUESTION 15
Which of these is used by the Cisco IP phone to relay to the switch the information regarding how much power is needed?
A. the Cisco Discovery Protocol
B. IEEE 802.10 protocol
C. Cisco IP phones always use a fixed power consumption hased on the resistor, which is specific to the model
D. The switch model determines how much power is consumed by the different phone models
Correct Answer: A

QUESTION 16
Refer to the exhibit.
100% Real Q&As | 100% Real Pass
Assume a centralized Cisco Unified Communications Manager topology with the headquarters at RTP and remote located at the U.K.
All route patterns are assigned a route list that contains a route group pointing to the local gateway. RTP route patterns use the RTP
gateway, and U.K. route patterns use the K. gateway.
When a U.K. user logs into an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000, which statement about the
emergency call is true?

A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway.
E. The call will fail.
Correct Answer: B

QUESTION 17
Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager?
A. missing the configuration command isdn bind-13 ccm-manager under the ISDN interface
B. mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway configuration
C. misconfigured route group in Cisco Unified Communications Manager
D. incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager
Correct Answer: B
QUESTION 18
Refer to the exhibits.

The HG_MRG that is shown in the exhibit is assigned to an MRGL, which is configured at the HQ phones.
A call exists between two HQ phones that use G.711 codec. When one of the HQ users attempts to conference a BR phone across the WAN, the conference fails.
The SDI trace shows an error “No transcoder device configured.”
Which statement indicates the correct resolution or reason for the issue?

100% Real Q&As | 100% Real Pass
D:\job\TestKing\Cisco\642-427\HYPERLINK
100% Real Q&As | 100% Real Pass

A. The BR phone does not have access to the HO_Conf bridge
B. The BR phone does not have access to the CFB_2 bridge
C. The BR phone does not have access to a transcoder
D. The CFB_2 bridge should be removed from the HQ_MRG and assigned to an MRG that is not assigned to an MRGL
E. The CFB_2 bridge should be listed last in the HO_MRG
Correct Answer: E

QUESTION 19
Refer to the exhibits.

When a remote Cisco Unified Communications Manager learns the advertised patterns that are shown in the exhibit, which patterns would be shown in the Cisco Unified Communications Manager RTMT tool?
A. 2XXX and the ToDiD will be 0:+498950555
B. 2XXX and the ToDiD will be 0+498953121
C. +4989505552XXX and the ToDiD will be 0:
D. +498953121 2XXX and the ToDiD will be 0:
E. Both +4989505552XXX and +4989531 21 2XXX will be advertised with ToDID of 0:
Correct Answer: A

QUESTION 20
Refer to the exhibits.
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
100% Real Q&As | 100% Real Pass
When the IP phone 2001 places a call to 9011 49403021 56001, the call is sent to the Cisco Unified Border Element as 40302156001 which is what the ITSP expects to receive. The ITSP support personnel claim that they never saw the call. Issuing the debug CCSIP message command on the Cisco Unified Border Element results in the message “SIP/2 0 404 Not Found”.
Refer to the Cisco Unified Border Element configuration, debug voice dial and ccsip messages exhibits. Which situation can cause this issued?
A. The Cisco Unified Bolder Element is configured as an MGCP gateway also so that the call is attempted via the PSTN
B. The command allow-connections sip to h323 is missing
C. SIP error 404 means that a codec mismatch occurred Cisco Unified Communications Manager is sending the call as an early offer with G.711 codec.
D. The Cisco Unified Communications Manager is rnisconfigured. The SIP invite should be sent to the ITSP at 10.1.2.1.2. The debug ccsip message shows the SIP invite being sent to 10.12.1.2.

Correct Answer: B

Flydumps.com never believes in second chances and hence bring you the best Cisco 642-427 exam preparation materials which will make you pass in the first attempt. Flydumps.com experts have complied the fail Cisco 642-427 exam content to help you pass your Cisco 642-427 certification exam in the first attempt and score the top possible grades too.

Continue Reading

Apple 9L0-620 Practice Exam, Most Accurate Apple 9L0-620 Free Dowload With High Quality

Do not you know how to choose the Apple 9L0-620 exam dumps? Being worried about your Apple 9L0-620 exam? Just try Flydumps new version Apple 9L0-620 exam dumps.High pass rate and money back guarantee!

QUESTION 86
You are configuring an LDAP connection on a Mac OS X computer, you created a custom mapping between Open Directory and LDAP attributes. Where does Mac OS X v10.5 store the custom mapping that the LDAP plug-in uses?
A. /Library/Preferences/com.apple.directoryservices.plist
B. /Library/Preferences/SystemConfiguration/preferences.plist
C. /Library/Preferences/DirectoryServices/DSLDAPv3PlugInConfig.plist
D. /Library/Application Support/Directory Access/LDAPv3/Templates/mappings.plist

Correct Answer: C QUESTION 87
How to create an Open Directory replica on a server named “mainserver.Real-Exams.net Company”?
A. You should use the command dscl localhost -createreplica /LDAPv3/mainserver.Real-Exams.net Company
B. You should use the command dscl localhost -startreplicator /LDAPv3/mainserver.Real-Exams.net Company
C. You should use the command slapconfig -createreplica mainserver.Real-Exams.net Company diradmin ‘Directory Administrator’ 1000
D. You should use the command slapconfig -startreplicator mainserver.Real-Exams.net Company diradmin ‘Directory Administrator’ 1000

Correct Answer: C QUESTION 88
You can use____ to map an Open Directory record to an LDAP record?
A. Directory Utility

Correct Answer: A QUESTION 89
Please point out which keys are stored in a Kerberos service principal?
A. The public keys used to encrypt the TGT
B. The public keys used to initiate an SSL connection
C. The secret keys use to authenticate the user with the KDC
D. The secret keys used to authenticate a server with the KDC

Correct Answer: D QUESTION 90
You have started up a Mac OS X v10.5 computer in single-user mode. In this mode, How to edit a user in the /Local/Default directory domain?
A. You should use the command-line tool vi
B. You should use the command-line tool ls
C. You should use the command-line tool plutil
D. You should use the command-line tool slapadd

Correct Answer: A QUESTION 91
You are reviewing the Directory Service log file on your Mac OS X Server v10.5 computer, you see error number -14002 listed. How to discover the meaning of this error number?
A. You should enter the command dserr -14002 in Terminal
B. You should enter the command dscl -e 14002 in Terminal
C. You should enter the command cat /var/db/err | grep 14002 in Terminal
D. You should enter the command DirectoryService -error 14002 in Terminal

Correct Answer: A QUESTION 92
Mike logs into a Mac OS X v10.5 computer using a non-administrator network user account hosted on a Mac OS X Server v10.5 computer. The user account is configured to use an Open Directory password. When Mike tries to connect to an AFP server that is configured to use only Kerberos authentication, an “Authenticate to Kerberos” dialog appears, requesting a name, realm, and password. Mike enters a valid user account name, realm, and password, and clicks OK. The same dialog reappears. How should a local system administrator resolve this issue?
A. Delete the System keychain on the Mac OS X client computer.
B. Use Directory Access on the Mac OS X client computer to enable the Kerberosv5 plug-in.
C. Run kdestroy on the Mac OS X client computer to destroy any existing tickets in the client computer’s cache.
D. Use Date & Time Preferences on the Mac OS X client computer to set the client’s date, time, and time zone to match the KDC.

Correct Answer: D QUESTION 93
In Mac OS X v10.5, dscl makes requests through DirectoryService.
A. TRUE
B. FALSE
Correct Answer: A QUESTION 94
In Mac OS X v10.5, dscl can edit BSD flat files.
A. TRUE
B. FALSE
Correct Answer: B QUESTION 95
In Mac OS X v10.5, dscl shows native data types.
A. TRUE
B. FALSE
Correct Answer: B QUESTION 96
In Mac OS X v10.5, dscl edits the local directory data store without starting another process.
A. TRUE
B. FALSE

Correct Answer: B QUESTION 97
You are configuring a Mac OS X v10.5 computer to use an LDAP server for login window authentication. Which Open Directory user attribute must you map to an LDAP user attribute?
A. You must map GID to an LDAP user attribute
B. You must map MCXFlags to an LDAP user attribute
C. You must map RecordName to an LDAP user attribute
D. You must map AuthenticationAuthority to an LDAP user attribute

Correct Answer: C QUESTION 98
Which log file can you use to troubleshoot directory service promotion issues?
A. slapd.log
B. slurpd.log
C. slapconfig.log
D. ldapaccess.log

Correct Answer: C QUESTION 99
Which process provides directory services in Mac OS X v10.5?
A. slapd
B. lookupd
C. OpenDirectory
D. DirectoryService

Correct Answer: D QUESTION 100
What happens when you make changes to the LDAP and Password Server databases on a Mac OS X v10.5 Open Directory replica using Workgroup Manager?
A. Changes to the LDAP and Password Server databases on the replica are redirected to the Open Directory master.
B. Changes to the LDAP and Password Server databases on the replica are stored on the replica’s LDAP database and are forwarded on to the master.
C. Changes to the LDAP database on the replica are stored in the local LDAP database and are forwarded on to the master; password changes are simply redirected to the master.
D. Changes to the LDAP database on the replica are redirected to the Open Directory master; password changes are stored in the local Password Server database and are forwarded on to the master.

Correct Answer: D QUESTION 101
A Mac OS X v10.5 client computer is bound to an Active Directory server providing user records and an Open Directory server providing user augment records. Which statement is true about this configuration?
A. The augment records can provide additional attributes to the user records provided by the Active Directory server.
B. The augment records can provide additional record types to the user records provided by the Active Directory server.
C. Attributes in the augment records on the Open Directory server will override conflicting attributes in the user records on the Active Directory server.
D. When an augment record has the same name as an Active Directory user record, Mac OS X uses the augment record in place of the Active Directory record.

Correct Answer: A QUESTION 102
On a Mac OS X v10.5 computer, which file is consulted by the BSD plugin for user authentication?
A. /etc/groups
B. /etc/master.passwd
C. /var/db/dslocal/nodes/BSD/Users/root.plist
D. /var/db/dslocal/nodes/Default/Users/root.plist

Correct Answer: B QUESTION 103
Please point out which keys are stored in a Kerberos service principal?
A. The public keys used to encrypt the TGT
B. The public keys used to initiate an SSL connection
C. The secret keys use to authenticate the user with the KDC
D. The secret keys used to authenticate a server with the KDC

Correct Answer: D QUESTION 104
You are reviewing the Directory Service log file on your Mac OS X Server v10.5 computer, you see error number -14002 listed. How to discover the meaning of this error number?
A. You should enter the command dserr -14002 in Terminal
B. You should enter the command dscl -e 14002 in Terminal
C. You should enter the command cat /var/db/err | grep 14002 in Terminal
D. You should enter the command DirectoryService -error 14002 in Terminal

Correct Answer: A QUESTION 105
In Mac OS X v10.5, dscl shows native data types.
A. TRUE
B. FALSE Correct Answer: B

Passing Apple 9L0-620 exam questions is guaranteed with Flydumps.com. Flydumps.com provides a great deal of Apple 9L0-620 preparation resources mend to step up your career with the endorsement of technical proficiency. The earlier you use Flydumps.com products, the quicker you pass you Apple 9L0-620 exam.

Continue Reading

Apple 9L0-616 Exam, Most Important Apple 9L0-616 Dump Test Online Store

Do not worry about your Apple 9L0-616 exam,Flydumps now has published the new veriosn Apple 9L0-616 exam dumps with more new added questions and answers,also you can free download Apple 9L0-616 vce test software and pdf dumps on Flydumps.com.

QUESTION 60
Array-based virtualization allows ________.
A. data to be saved redundantly to multiple drives
B. hosts to access storage devices located in distant sites
C. multiple physical drives to be represented as a single LUN
D. each disk drive in an array to be mirrored by a backup drive
Correct Answer: C QUESTION 61
In which of these files is the metadata controller priority setting stored?
A. acfs.plist
B. role.plist
C. mdc.plist
D. priority.plist

Correct Answer: B QUESTION 62
You want to use access control lists (ACLs) on your Xsan volumes. What minimum version of Xsan must be running on the SAN controller for you to do so?
A. version 1.1
B. version 1.2
C. version 1.3
D. version 1.4

Correct Answer: D QUESTION 63
You are configuring an Apple Fibre Channel PCI-X card. What topology setting does Apple recommend?
A. Automatic
B. Point-to-Point
C. Arbitrated Loop
D. Switched Fabric

Correct Answer: A QUESTION 64
What should an Xsan volume’s configuration status be, when you enable access control lists (ACLs) on that volume?
A. The Xsan volume configuration should not have been saved yet.
B. Affinities should have been defined for the Xsan volume, and the volume should be started.
C. All clients and controllers in your Xsan environment should have the Xsan volume mounted, and the volume should be started.
D. No clients and controllers in your Xsan environment should have the Xsan volume mounted, and the volume should be stopped.

Correct Answer: D QUESTION 65
World Wide Node Names (WWNNs) and World Wide Port Names (WWPNs) are assigned to devices by ________.
A. Xsan Admin, during configuration
B. RAID Admin, during configuration
C. the factory, during manufacturing
D. the Fibre Channel switch, during initialization

Correct Answer: C QUESTION 66
You have created a storage pool with three LUNs, each on a separate Xserve RAID controller. Assume that each RAID controller has a bandwidth of 200 MB/s. What is the theoretical bandwidth of this storage
pool?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 66 MB/s
B. 200 MB/s
C. 300 MB/s
D. 600 MB/s
E. 900 MB/s

Correct Answer: D QUESTION 67
When a client accesses files on an Xsan volume, which THREE types of information are transferred across the metadata controller’s private Ethernet network?
A. file icons
B. file names
C. file contents
D. file permissions
E. file creation dates
F. Spotlight comments

Correct Answer: BDE QUESTION 68
Which parameter defines the number of file allocation blocks that a client writes to a LUN before moving on to the next LUN within a storage pool?
A. stripe breadth
B. number of LUNs
C. block allocation size
D. RAID level configuration

Correct Answer: A QUESTION 69
A metadata controller in your Xsan environment has 4 gigabytes of RAM installed. What is the maximum
number of Xsan volumes that Apple recommends you host on this controller to ensure good performance?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 4
B. 5
C. 6
D. 7

E. 8 Correct Answer: D QUESTION 70
What component(s) MUST be present for a SAN to be considered a Fibre Channel fabric?
A. at least one Fibre Channel hub
B. at least one Fibre Channel switch
C. at least two Fibre Channel host bus adapters
D. at least two initiator nodes and one target node, connected via the FC-AL protocol

Correct Answer: B QUESTION 71
When setting up user quotas in Xsan, you should ensure that each user account ________.
A. is a member of the xsanadmin group
B. resides on an Open Directory LDAP server
C. has disk quotas enabled in Workgroup Manager
D. has either a unique UID (User ID) or a unique GUID (Generated Unique ID)

Correct Answer: D QUESTION 72
In a switched fabric, Fibre Channel IDs are resolved to World Wide Names (WWNs) by ________.
A. the SFP
B. the switch
C. the N_Ports
D. the metadata controller

Correct Answer: B QUESTION 73
You have created a storage pool with two LUNs that share the same RAID controller. Assume that the
RAID controller has a bandwidth of 200 MB/s. What is the theoretical bandwidth of the storage pool?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 25 MB/s
B. 50 MB/s
C. 100 MB/s
D. 200 MB/s
E. 400 MB/s

Correct Answer: D QUESTION 74
Which TWO types of SAN client can recognize and use access control lists (ACLs) on an Xsan volume?
A. Xsan 1.2
B. Xsan 1.3
C. Xsan 1.4
D. compatible versions of Unix
E. compatible versions of Windows StorNext Correct Answer: CE
QUESTION 75
What is the largest Xsan volume you can create on Mac OS X v10.4.x clients that are running Xsan 1.3 or later?
A. 16 terabytes
B. 64 terabytes
C. 128 terabytes
D. 2 petabytes

Correct Answer: D QUESTION 76
How is file system metadata transported between clients and the metadata controller?
A. over an iSCSI bus
B. over an 802.1x network
C. over an Ethernet network
D. over a Fibre Channel network

Correct Answer: C QUESTION 77
You want to host three SAN volumes on an Xsan controller. What is the minimum amount of RAM that
Apple recommends you install in the controller?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 512 megabytes
B. 1.5 gigabyte
C. 2 gigabytes
D. 3 gigabytes

Correct Answer: C QUESTION 78
Which file contains the IP addresses of all metadata controllers?
A. fsmlist
B. fsname
C. fsmservers
D. fsnameservers

Correct Answer: D QUESTION 79
You have created a storage pool with three LUNs, each on a separate Xserve RAID controller. Assume that each RAID controller has a bandwidth of 200 MB/s. What is the theoretical bandwidth of this storage pool?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 66 MB/s
B. 200 MB/s
C. 300 MB/s
D. 600 MB/s
E. 900 MB/s

Correct Answer: D
QUESTION 80
When setting up user quotas in Xsan, you should ensure that each user account ________.
A. is a member of the xsanadmin group
B. resides on an Open Directory LDAP server
C. has disk quotas enabled in Workgroup Manager
D. has either a unique UID (User ID) or a unique GUID (Generated Unique ID)
Correct Answer: D

Flydumps.com takes in the latest Apple 9L0-616 questions in the Apple 9L0-616 exam materials so that our material should be always the latest and the most relevant. We know that Apple 9L0-616 examination wouldn’t repeat the same set of questions all the time. Microsoft certification examinations are stringent and focus is often kept on updated technology trends. The Apple 9L0-616 exam questions organized by the professionals will help to condition your mind to promptly grasp what you could be facing in the Apple 9L0-616 cert examination.

Continue Reading

Cisco 600-511 Test, Helpful Cisco 600-511 Certification Exams Covers All Key Points

Flydumps Cisco 600-511 exam material details are researched and created by the Most Professional Certified Authors who are regularly using current exams experience to create precise and logical dumps.You can get questions and answers from many other websites or books, but logic is the main key of success, and Flydumps will give you this key of success.

QUESTION 1
Which two benefits are achieved through database sharding within the Cisco APIC cluster? (Choose two.)
A. active-standby high availability
B. scalability
C. compression
D. reliability
E. load balancing

Correct Answer: BD
QUESTION 2
Which overlay protocol does Cisco AVS for vSphere use to allow the ACI fabric to extend over an existing network infrastructure?
A. GRE
B. IPsec
C. NVGRE
D. VXLAN
E. OTV

Correct Answer: D
QUESTION 3
Which three main problems was a host overlay system designed to address? (Choose three.)
A. workload mobility
B. simplified and automated workload provisioning
C. multitenancy at scale
D. integrate physical and virtual networking
E. increase visibility to traffic flows
F. better root cause analysis capabilities
G. consolidate IT infrastructure teams
Correct Answer: ABC
QUESTION 4
Which two benefits of ACI help improve the time required to deploy an application? (Choose two.)
A. enabling software developers to create development environments similar to production
B. eliminating the need for expensive Layer 4 to Layer 7 service appliances
C. eliminating IP addressing from software stacks
D. evolving the IT model from manual workflows to an application model that automates deployment, operations, and visibility
Correct Answer: AD
QUESTION 5
Which two ACI features assist with application service-level assurance? (Choose two.)
A. tenant health scores
B. Layer 4 to Layer 7 service integration
C. Cisco APIC database sharding
D. fabric health scores
E. QoS

Correct Answer: AD
QUESTION 6
Which ACI construct provides the policy-based definition that comprises the communication, performance, and security needs of an application?
A. service profile
B. endpoint group
C. application service profile
D. application network profile

Correct Answer: D
QUESTION 7
The use of the Cisco Bi-Di 40G transceiver provides cost effective transition to a 40G ACI fabric through transmission over which cabling plant?
A. Category 6a copper
B. single pair of OM3/OM4 MM fiber
C. single pair of SM fiber
D. Twinax copper

Correct Answer: B
QUESTION 8
Which method does ACI fabric dynamic load balancing use to provide optimal balancing of flows across the fabric?
A. Flows are dynamically allocated according to congestion at the leaf.
B. Flows are dynamically allocated according to hop-by-hop congestion in the fabric.
C. Flows are dynamically allocated according to link BER.
D. Flows are distributed in per packet round-robin.

Correct Answer: B
QUESTION 9
Which four benefits are provided by ACI services to achieve business and technical objectives? (Choose four.)
A. Identify and address technical and operational readiness to effectively deploy this architecture to support your target use cases.
B. Simplify operations through integration at the infrastructure, systems, and management levels.
C. Protect capital and operational investments while gaining a simple transition path from existing environments to architecture based on Cisco ACI.
D. Allow centralized application-based policy automation, programmability, and visibility into physical and virtual networks from a single point of management.
E. Allow centralized management and control over all Cisco platforms and non Cisco platforms.
F. Simplify and reduce the number of applications for better DevOps support.
G. Ability to design, install, and manage access/aggregation/core networks.
H. Emphasize technical objectives to best meet business requirements.
Correct Answer: ABDE
QUESTION 10
Which three options are major components of the Cisco ACI fabric? (Choose three.)
A. spine switches
B. application network profiles
C. leaf switches
D. Application Policy Infrastructure Controller
E. OpenFlow controller
F. Layer 4 to Layer 7 service devices

Correct Answer: ACD
QUESTION 11
Which four options are important functions offered by the Cisco APIC? (Choose four.)
A. fault and event management
B. hypervisor, storage, and computing management
C. Layer 3 through 5 services integration
D. statistical collection and analysis
E. performance management
F. nonblocking data plane
G. 1.5:1 oversubscribed ports
H. BGP and OSPF routing protocol support

Correct Answer: ABDE
QUESTION 12
Before you design an ACI fabric, it is important to understand existing application interactions. If you do not understand them entirely, which approach can you use?
A. Design a classic routing configuration in which everybody can talk to anybody as the equivalent to a contract called “anyany” that all EPGs provide and consume.
B. Design around the Cisco ACI whitelist model using the common tenant, where, by default, two EPGs can communicate to each other in the absence of a contract.
C. Map each EPG to familiar constructs such as VLANs that provide segmentation and will apply policy application interactions.
D. Leverage advanced orchestration tools like Cisco Intelligent Automation for Cloud or Cisco UCS Director to document existing application interactions.

Correct Answer: A
QUESTION 13
You want to satisfy the business, risk, and customer requirements. Which option is a consideration when you select and design an ACI fabric?
A. the requirement for meaningful services (such as traffic load balancing, segmentation, filtering, traffic insertion, and monitoring) for workloads provided by virtual Layer 4 to Layer 7 servers
B. virtual machine mobility because moving from one server to another one would have to occur on the same leaf so that ACI can preserve virtual machine visibility and policy enforcement
C. the breakdown of virtual versus physical workloads because virtual workloads are treated preferentially in ACI
D. the requirement for a central point of management, but no centralized control plane
Correct Answer: D

With the complete collection of Cisco 600-511 Questions and Answers, Flydumps has assembled to take you through Questions and Answers to your Cisco 600-511 Exam preparation. In the Cisco 600-511 exam resources, you will cover every field of Cisco 600-511 exam helping to ready you for your successful Microsoft Certification.

 

Continue Reading

3Com 3M0-700 PDF Dumps, Valid and updated 3Com 3M0-700 Certification Braindumps UP To 50% Off

Welcome to download the newest Pass4itsure 70-480 VCE dumps: http://www.newcerts.com/070-480.html

Flydumps provides the guaranteed preparation material to boost up your confidence in 3Com 3M0-700 exam. Successful candidates have provided their reviews about our guaranteed 3Com 3M0-700 preparation material,you can come to realize the real worth of our featured products through overviewing the reviews and testimonials.

QUESTION 65
As the administrator, placing a check in the Fwd to Auto Attendant box sends a caller to the default system Auto Attendant. This overrides Voice Mail access, if the user has selected Voice Mail for call handling.

A. True
B. False

Correct Answer: A QUESTION 66
Which three are features of the NBX Offsite Notification? (Choose three.)
A. Up to five different call numbers/options can be setup for a user offsite notification
B. Offsite notification privileges and options are defined in the User Configuration menu
C. Only messages tagged as “urgent” will be forwarded by the offsite notification feature
D. Offsite Notification must be enabled in the NBX Messaging, as well as, in the Class of Service (CoS)
E. Only the NBX system administrator or users with administrator privileges can use offsite notification
F. Users can be notified of voice messages to another internal extension, an external phone, a pager or via email

Correct Answer: ADF
QUESTION 67
Click theTask button.
What icon would the administrator select to create or modify a Calling Group?

A.
B.
C.
D.

Correct Answer: QUESTION 68
Click theTask button.
What icon would the administrator select to create or modify a Hunt Group?
A.
B.
C.
D.

Correct Answer:
QUESTION 69
Which two are features of an NBX Calling Group? (Choose two.)
A. Member phones ring simultaneously for incoming calls
B. Calling Groups are the same as NBX Key Mode configuration
C. Up to 100 Calling Groups can be configured on an NBX 100 system
D. NBX administrator can define “ring progression” for a Calling Group
E. Member login/logout password is defined by NBX administrator using NetSet

Correct Answer: AE
QUESTION 70
Which four are features of the NBX Auto Attendant (AA)? (Choose four.)
A. Supports up to 100 AA
B. Can answer with or without a live attendant
C. Only answers when no live attendant is available
D. Any NBX user can create an AA for their extension
E. Can configure different AA based on time of day and day of week
F. Each AA can be configured when to time out and whether to hang up or forward the call
G. AA message can be recorded via an NBX phone or be an imported .wav or an MP3 file

Correct Answer: ABEF
QUESTION 71
Which four are attributes of the second generation NBX T1 Digital Line Card (3C10116D) and the E1 Digital Line Card (3C10165D)? (Choose four.)
A. Embedded CSU with CSU statistics
B. Requires NBX software Release 4.3 or higher
C. Provides both T1 and E1 support on the same card
D. Can be configured with up to 17 different IP addresses for Fractional Channel support
E. Includes a 100/1000 Mbps LAN port for improved packet throughput and reduced latency
F. Can be configured for G.729 audio compression and silence suppression for bandwidth efficiency
G. Has one Power Failure Transfer Port that can be used to make an outbound call in case of a power failure
H. Has remote Layer 3 support for communicating with a Network Call Processor (NCP) across a routed network

Correct Answer: ABFH
QUESTION 72
The NBX Communication System provides E911 (emergency) connectivity when the Digital Line Card is configured for T1 signaling.
A. True
B. False

Correct Answer: B
QUESTION 73
Each time a new Dial Plan is imported or modified, the system performs a consistency check.
A. True
B. False

Correct Answer: A
QUESTION 74
Which four are functions of the NBX Dial Plans? (Choose four.)
A. Dictates how calls are handled
B. Translates dialed digits into a specific destination
C. Forwards voice mail messages to internal extensions
D. Determines the route a call will take to its destination
E. Defines a set of destinations that can be reached by the NBX system
F. Translates single digit speed dial codes into full extension or outbound telephone numbers
G. Verifies if a user has the authorization to make the call, for example, long distance or trunk-to-trunk
Correct Answer: ABDE
QUESTION 75
Which three are features of the NBX Pretranslator function? (Choose three.)
A. Pretranslation is not available on Analog Line Cards
B. Each Pretranslation is used for either incoming or outgoing traffic
C. Each Pretranslation is used for both incoming and outgoing traffic
D. Outbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) supported by the Digital Line Card
E. A single outbound or inbound Pretranslation definition contains all the required translations defined in order from lowest-to-highest extension
F. Inbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) or Direct Inward Dial (DID) supported by the Digital Line Card

Correct Answer: ABF
QUESTION 76
Which three are features of the NBX Dial Plan timed routes? (Choose three.)
A. Can designate a specific destination route for each time period
B. Can create route plans based on specific time-of-day or day-of-week
C. Can group time periods and point them to a specific route destination
D. Can disable specific routes for any time period, for example, holiday, night, etc.
E. Can create route plans based on pre-configured business hours – open, closed, lunch etc.
F. Can create route plans based on a specific date, for example, business, state or country holiday

Correct Answer: ABE
QUESTION 77
The NBX Dial Plan can be configured to route calls to an alternate carrier or to replace an internal extension number with an external number, for example, a cell phone.
A. True
B. False

Correct Answer: A
QUESTION 78
Which three bandwidth reduction methods are supported by the NBX system? (Choose three.)
A. Pulse Code Modulation (PCM)
B. Adaptive Transform Encoding (ATE)
C. ITU-T G.723 bandwidth compression
D. ITU-T G.729 bandwidth compression
E. Silence suppression on a per-device basis only
F. Adaptive Differential Pulse Code Modulation (ADPCM)
G. Silence suppression on a system-wide or per-device basis
Correct Answer: DFG
QUESTION 79
Which three are NBX IP licensing features or requirements? (Choose three.)
A. Every NBX device requires a fixed IP address
B. A DHCP server is required to use IP On-the-Fly
C. IP On-the-Fly is included with all new NBX base systems
D. Companies can upgrade their license from IP On-the-Fly to Standard IP
E. IP addresses can be supplied via static or DHCP addressing when using Standard IP
F. An NBX phone can operate as a Layer 3 “IP Phone” on a per-call basis when using IP-on-the-Fly

Correct Answer: CEF
QUESTION 80
Which three are important considerations when configuring/calling a remote NBX phone connected via a cable modem or DSL link? (Choose three.)
A. Enable silence suppression and low bandwidth options in the NBX
B. Fixed or DHCP IP address can be assigned to remote NBX phones
C. An NBX gateway is required to support remote users without an NBX
D. All phone calls between the central and remote sites use Layer 2 IP packets
E. The Network Call Processor (NCP) can provide the remote phone an IP address for the duration of a call to a remote user
F. Network Address Translation (NAT) should be configured for the central site but NAT should not be used at the remote site
G. The Network Call Processor (NCP) can be configured to provide the local phone an IP address for the duration of a call to a remote user

Correct Answer: ABG
QUESTION 81
Which three are requirements for conference call support across Virtual Tie Lines (VTL)? (Choose three.)
A. Requires Standard IP license for each participating NBX system
B. Must use same range of multicast addresses on all NBX systems
C. WAN routers must support Internet Gateway Multicast Protocol (IGMP)
D. Internet Gateway Multicast Protocol (IGMP) addresses must be defined
E. Music on Hold (MOH) and internal page initiation must be done from NetSet
F. Requires Network Address Translation (NAT) configuration on Virtual Tie Lines

Correct Answer: BCD
QUESTION 82
Virtual Tie Lines allow NBX Communication Systems and legacy PBX equipment to place calls between one another without using Analog or Digital connections.
A. True
B. False

Correct Answer: B
QUESTION 83
Which four are features/requirements of the NBX Desktop Call Assistant (DCA) application? (Choose four.)
A. Requires Microsoft Windows 2000 or Windows XP
B. Requires one 3Com SKU and license per NBX system
C. Supports point and click dialing to any phone in the user directory
D. Provides personal inbound/outbound call logs with caller ID information
E. Uses Microsoft Telephone Applications Program Interface (TAPI) to manage calls
F. Computer with NBXTSP software must have a physical connection to an NBX phone
G. Users can manage all their calls from a single on-screen computer interface, for example, call transfer, conferencing, call park

Correct Answer: CDEG
QUESTION 84
Inbound NBX Computer Telephony Integration (CTI) calls support directory dialing, on-screen dialing and call processing.
A. True
B. False
Correct Answer: B QUESTION 85

Flydumps 3Com 3M0-700 practice tests are composed of latest exam questions formulate an actual exam scenario with an intent to expose your potentials and latent skills. Our Microsoft practice tests encompass all the fundamental of 3Com 3M0-700 exam formats, orients your efforts towards guaranteed success for 3Com 3M0-700 exams. You can hit your target with assurance if you have opted for our practice test training.

Newcerts 070-480 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/70-480.html

Continue Reading

3Com 3M0-211 Dumps, Most Reliable 3Com 3M0-211 Practice Exam On Store

Welcome to download the newest Pass4itsure MB7-702 VCE dumps: http://www.newcerts.com/MB7-702.html

Flydumps 3Com 3M0-211 exam material details are researched and created by the Most Professional Certified Authors who are regularly using current exams experience to create precise and logical dumps.You can get questions and answers from many other websites or books, but logic is the main key of success, and Flydumps will give you this key of success.

QUESTION 55
Which two Switch Fabric Engine LED conditions indicate there is a problem with the Switch 7700? (Choose two)
A. ALMLED is off
B. ALMLED is blinking
C. RUN LED is solid green
D. RUN LED is blinking green Actualtests.com – The Power of Knowing

Correct Answer: BC
QUESTION 56
When two PCs on the same Virtual LAN (VLAN) are unable to communicate with each other, which three procedures will help troubleshoot the Layer 2 Data Link issue? (Choose three)
A. Flush the IP routing table
B. Check the VLAN setting for each port
C. Check the LED status on each of the ports
D. Clear and reset the Spanning Tree Protocol tables
E. Flush the Address Resolution Protocol table
F. Check the bridge forwarding table to ensure the IP/MAC address assignment is correct
Correct Answer: BEF
QUESTION 57
Which four are hardware features/functions of the SuperStack 3 Switch 4900 Family? (Choose four)
A. Full/half duplex on all ports
B. Four traffic queues per port
C. Store and forward switching
D. GBIC interface for flexible cabling
E. 12,000MAC addresses per unit, 64 permanent
F. Smart auto-sensing across all multi-speed copper ports
Correct Answer: ABEF
QUESTION 58
Which four are switch configuration features of the Superstack 3 switch 4900 Family? (Choose four)
A. Configuration information is stored in a read-only file
B. Switch configuration can be stored or restored from a remote server
C. Up to three software images can be saved in the switch’s flash memory
D. The switch must be reset to the factory default before a configuration can be saved
E. Only a manager or security access level user can perform save or restor operations
F. All switch information is saved to the configuration file i.e, passwords, IP addresses, etc..
G. During the software upgrade the new image will always overwrite the standby image
H. The configuration of the Distributed Fabric is saved and restored with eXpandable Resilient Networking (XRN)

Correct Answer: ABH
QUESTION 59
XRN Technology v2.0 allows network architects to scale bandwidth capacity.
A. True
B. False

Correct Answer: A
QUESTION 60
Which three are features of Open Shortest Path First (OSPF) routing? (Choose three)
A. 15 maximum router hops
B. Uses a path cost routing metric
C. Updates routing tables when network topology changes occur
D. By default, peridoc updates are sent every 30 seconds between routers
E. Maximum hops are limited only by the size of the routing tables within routers

Correct Answer: BCE
QUESTION 61
Which class of IP addresses is reserved for IP multicasting?
A. Class A
B. Class B
C. Class C
D. Class D
E. Any class of IP address may be used for IP multicasting
Correct Answer: D
QUESTION 62
Which LAN technology provides both incremental bandwidth and redundancy between devices?
A. Resilient Links
B. Aggregated Links
C. IEEE 802.3 1D Spanning Tree Protocol (STP)
D. Virtual Router Redundancy Protocol (VRRP)
E. IEEE 802.3 1W Rapid Spanning Tree Protocol (RSTP)

Correct Answer: B
QUESTION 63
Your Maluti University (MU) data center design uses a single Switch 8814 to support the campus backbone, the server farm and the wiring-closet connections in Building 9. Which four current Switch 8800 features address Maluti Univerisity (MU) network requirements? (Choose four)
A. With no single point of failure, the switch creates a reliable, high-availablity solution
B. Protocol-based VLAN support provides the necessary flexibility to control broadcast traffic.
C. Support integrated Services (IntServ) and RSVP to provide flow-based, fine-grain control over network traffic.
D. With the load-sharing, redundant Switch Fabric, the switch has a maximum aggregated throughput of more than 400 Mpps
E. Multiple priority features will ensure key applications receive the best network response,i.e;right priority queues per port,weighted Random Early Diction (WRED) queuing and DiffServ support.
F. IEEE 802.1X network Login and Authentication, Authorization, Accounting (AAA) capabilities provide the necessary network security by establishing what services employees can use and preventing unauthorized users from gaining access to the network

Correct Answer: CDEF
QUESTION 64
Which 3Com solution would you recommend for the Maluti University (MU) data center in Building 9 to create the highly-redundant campus backbone connecting the four distribution buildings?
A. Option A -One Switch 7700 8-Slot Chassis Starter Kit with -One 8-port 1000BASE-X module (3C16858) Eight 1000BASE-SX GBICs (3CGBIC91)
B. Option B -One Switch 8810 Starter Kit with -One 12-port 1000BASE-X module (3C17516) Eight 1000BASE-LX GBICs (3CGBIC92)
C. Option C -One Switch 8814 Starter Kit with -One 12-port 1000BASE-X module (3C17516) Eight 1000BASE-LX SFP Transceivers (3CSFP92) -One Switch 8800 360 Gbps Fabric Module (3C17508)
D. Option D -One Switch 8814 Starter Kit with -One 12-port 1000BASE-X module (3C17516) -Eight 1000BASE-LX SFP Transceivers (3CSFP92) -Two Switch 8800 360 Gbps Fabric Modules (3C17508) Actualtests.com – The Power of Knowing

Correct Answer: C
QUESTION 65
If you recommended the 3Com Switch 8800 for Maluti University (MU) data center solution in Building 9, which Switch 8800 interface-module solution would you use to connect the Satellite Buildings to the data center switch?
A. One 24-port 10/100/1000BASE-T Module (3C17516)
B. Multiple 2-port 10 GBASE-X modules (3C17512) with 10GBASE-ER XENPAK transceivers
C. One 12-port 1000BASE-X module (3C17513) with multiple 1000BASE-LH SFP Transceivers (3CSFP97)
D. One 12-port 1000BASE-X module (3C17513) with multiple 1000BASE-LX SFP Transceivers (3CSFP92)

Correct Answer: D
QUESTION 66
You recommended a 1000BASE-X campus-backbone solution to Maluti University (MU) to connect the four distribution buildings to the data center MU is concerned that the 1000BASE-X campus backbone will not provide enough network bandwidth to support its combined data/voice network traffic. Which solution would you recommend to MU to alleviate this concern?
A. Use VLAN segmentation to reduce the traffic that traverses the campus backbone.
B. Distribute the 28 servers, currently located in Building 9 data center, throughout the network to reduce campus-backbone traffic.
C. Use the Switch 8800 in the data center and the Switch 4070 in the distribution centers with 10-Gig Ethernet connections between the switches
D. Use the Switch 8800 in the data center and the Switch 7700 in the distribution centers with 10-Gig Ethernet connections between the switches

Correct Answer: D
QUESTION 67
If you recommended the 3Com Switch 8800 for Maluti University (MU) data center solution in Building 9, which Switch 8800 interface-module solution would you use to connect the wiring-closet switches in Building 9 to the data center switch?
A. The 12-or 24-Port 1000BASE-X module
B. The 24-port 10/100/1000BASE-T Module (3C17516)
C. The 12- or 24-Port 1000BASE-X module with multiple 1000BASE-SX SFP Transceivers ( 3CSFP91)
D. The 12- or 24-port 1000BASE-X module with multiple 1000BASE-LHSFP Transceivers (3CSFP97) Actualtests.com – The Power of Knowing

Correct Answer: C
QUESTION 68
Which solution would you recommend to the Da Silva Research Foundation (DRF) to support its wiring closet, end-user switch requirements?
A. SuperStake 3 Switch 4400 FX
B. SuperStake 3 Switch 4400 SE with a 1000BASE-SX Module
C. SuperStake 3 Switch 4400 24/48-Port with 1000BASE-T Module
D. SuperStake 3 Switch 4400 24/48-Port with 1000BASE-SX Module

Correct Answer: D
QUESTION 69
Which two 3Com solution would you recommend for the Da Silva Research Foundation (DRF) Building 9 data center to support both the campus/building backbone and the server farm with a single switch? (Choose two)
A. One Switch 4070
B. One Switch 7700 7-Slot Chassis
C. One Switch 7700R 8-Slot Chassis
D. One Switch 8807
E. One Switch 8810

Correct Answer: CE
QUESTION 70
Which three Switch 8800 features address the Da Silva Research Foundation (DRF) data center’s backbone-core requirements? (Choose three)
A. Protocol-based VLAN support provides the necessary flexibility to control broadcast traffic.
B. Load-sharing, redundant Switch Fabric provides higher data throughput and increased network reliability
C. With four prioritization queues per port, the switch has the QoS support required for network telephony
D. Reliability features reduce network outages, i.e, hot-swappable I/O modules, power supplies fans, Switch Fabric and VRRP support.
E. Resilient Links used in combination with Link Aggregation creates hih-speed, redundant links from the data center to the four distribution buildings.
F. IEEE 802.1X network Login and Authentication, Authorization, Accounting (AAA) capabilities provide the necessary network security by establishing what services Actualtests.com – The Power of Knowing employees can use and preventing unauthorized users from gaining access to the network

Correct Answer: BDF
QUESTION 71
If you chose either the 3Com Switch 8810 or Switch 8814 for Da Silva Research Foundation (DRF) data center solution, which interface Modules would you use to connect the four distribution centers and the nine satellite buildings?
A. Option A -One 24-port 1000BASE-X module (3C17514) with -Four 1000BASE-LX SFP Transceivers (3CSFP92) to connect the distribution centers -Nine 1000BASE-SX SFP Transceivers (3CSFP91) to connect the satellite buildings
B. Option B -Two 24-port 1000BASE-X modules (3C17514) with -26 1000BASE-SX SFP Transceivers (3CSFP91) to connect the distribution centers and the satellite buildings
C. Option C -One 12-port 1000BASE-X modules (3C17513) and One 24-port 1000BASE-X modules (3C17514) with -26 1000BASE-SX SFP Transceivers (3CSFP91) to connect the distribution centers and the satellite buildings
D. Option D -One 12-port 1000BASE-X modules (3C17513) One 24-port 1000BASE-X modules (3C17514)with Eight 1000BASE-SX SFP Transceivers (3CSFP92) to connect the distribution centers -18 1000BASE-SX SFP Transceivers (3CSFP91) to connect the satellite buildings

Correct Answer: D
QUESTION 72
Which two 3 Com solutions would you recommend to Da Silva Research Foundation (DRF) for each of the four distribution centers in Buildings 16,20,35 and 38, to connect them to the campus backbone? (Choose two)
A. Option A -Two Switch 4050 each with -One 1000BASE-SX GBIC
B. Option B -Two Switch 4060 each with -One 1000BASE-LX GBIC
C. Option C -One switch 7700 7-slot chassis starter kit with -One 8-port 1000BASE-X module (3C16858) -Two 1000BASE-SX GBICs (3CBIC91)
D. Option D Actualtests.com – The Power of Knowing -One switch 7700R 8-slot chassis starter kit with -One 8-port 1000BASE-X module (3C16858) -Two 1000BASE-LX GBICs (3CBIC92)
E. Option E -One switch 7700 R 8-slot chassis starter kit with -One 8-port 1000BASE-X module (3C16858) -Four 1000BASE-LX GBICs (3CBIC92)

Correct Answer: BD
QUESTION 73
Which three Switch 8800 features address the Da Silva Research Foundation (DRF) data center’s backbone-core requirements? (Choose three)
A. Protocol-based VLAN support provides the necessary flexibility to control broadcast traffic.
B. Load-sharing, redundant Switch Fabric provides higher data throughput and increased network reliability
C. With four prioritization queues per port, the switch has the QoS support required for network telephony
D. Reliability features reduces network outages, i,e hot -swappable I/O modules, power supplies fans, Switch Fabric and VRRP support
E. Resilient Links used in combination with Link Aggreation creates high-speed, redundant links from the data center to the four distribution buildings
F. IEEE802.1Xnetwork Login and Authentication Authorization, Accounting (AAA) capabilities provide the necessary network security by eastablishing what services employees can use and preventing unauthorized users from gaining access to the network

Correct Answer: BDF
QUESTION 74
Which two 3Com solutions would you recommend for the Da Silva Research Fundation (DRF) Building 9 data center to support both the campus/building backbone and the server farm with a single switch? (Choose two)
A. One Switch 4070
B. One Switch 7700 7-Slot Chassis
C. One Switch 7700R 8-Slot Chassis
D. One Switch 8807
E. One Switch 8810

Correct Answer: CE
QUESTION 75
Which solution would you recommend as the distribution-layer switch for each of
Actualtests.com – The Power of Knowing
the Bantry Bay four main buildings that connect to the data center and to the smaller buildings on campus?
A. Two Switch 4050
B. Two Switch 4060
C. Two SuperStack 3 Switch 4924
D. Two SuperStake 3 Switch 4950

Correct Answer: B
QUESTION 76
If you choose two Switch 4060s for each of the Bantry Bay distribution layer buildings, which three would you recommend to the customer to provide maximum resiliency and throughput? (Choose three)
A. Redundant internal power supplies
B. Resilient Links to maximize backbone redundancy
C. SuperStack 3 Advanced Redundant Power System
D. XRN Interconnect Kit to connect the two distribution-layer switches
E. IEEE802.3 ad Link Aggregation to maximize backbone bandwidth and reliability
F. SuperStack 3 Switch 4900 1000BASE-T module to connect the two distribution-layer switches

Correct Answer: ADE
QUESTION 77
If you choose the SuperStack 3 Switch 4924 to support the Bantry Bay server farm, which three customer benefits are attained from using an XRN interconnection Kit with the two SuperStack 3 Switch 4924 server-farm switches? (Choose three)
A. The Fabric Interconnect has an 8-Gbps (16-Gbps full duplex)switching limit
B. The two switches would share one IP address and be managed as a single entity
C. Any number of ports can join a Link Aggregation trunk with all ports active and transporting data
D. XRN Distributed Resilient Routing (DDR) uses a “Master Router” to perform all the routing across the Fabric.
E. XRN Distributed Resilient Routing (DDR) allows switches in the Fabric to act as a single logical router, which provides router resiliency in the event of a unit failure in the Fabric
F. XRN Distributed Link Aggregation (DLA) guarantees high levels of resiliency, because a failure in one of the member links results in automatic redistribution of traffic across the remaining links

Correct Answer: BEF
QUESTION 78
If you reocommend a single Switch 7700R 8-Slot Chassis to create the hihly-resilient backbone, which three switch components would Bantry Bay require for the data center’s backbone-core switch? (Choose three)
A. One Switch 7700R Starter Kit (3C16852)
B. One Switch 7700 AC Power Supply (3C 16854)
C. Three Switch 7700 AC Power Supplies (3C 16854)
D. One Switch 7700R 8-Slot Fan Assembly (3C 16855)
E. One Switch 7700R Gigabit Ethernet Redundant Switching Fabric (3C 16857R)

Correct Answer: ABE
QUESTION 79
Which two 3Com solutions would you recommend for the Bantry Bay data center, backbone core? (Choose two)
A. Two Router 6040
B. One Router 6080
C. Two Switch 7700 4-Slot Chassis
D. Two switch 7700 7-s;ot chassis
E. One switch 7700R 8-slot Chassis

Correct Answer: DE
QUESTION 80
If you recommend a Switch 7700 for the data center backbone-core solution, which three modules/ interfaces would the customer require for each of the two data center backbone-core switches? (Choose three)
A. Eight 1000BASE-SX GBICs (3CGBIC91)
B. Eight 1000BASE-LH70 GBICs (3CGBIC97)
C. One Switch 7700 8-port 1000BASE-T module (3C16859)
D. One Switch 7700 8-port 1000BASE-X module (3C16858)
E. Two Switch 7700 8-port 1000BASE-T module (3C16859)
F. Two Switch 7700 8-port 1000BASE-X module (3C16858)
Correct Answer: ACD
The Flydumps New 3Com 3M0-211 practice tests helps the user to keep a check on their learning and understanding and improve for the 3Com 3M0-211 exam. Flydumps makes you pass your exam much easier.
Newcerts MB7-702 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/mb7-702.html

Continue Reading

Apple 9L0-207 Q&A, Free Download Real Apple 9L0-207 Answers Is What You Need To Take

Welcome to download the newest Pass4itsure C4040-108 VCE dumps: http://www.flydumps.com/C4040-108.html

GOOD NEWS: You can free download 100% accurate Apple 9L0-207 practice test for training on Flydumps.com.Flydumps is also an authenticated IT certifications site that offers all the new Apple 9L0-207 questions and answers timely.Visit the site Flydumps.com to get free Apple 9L0-207 VCE and PDF.

QUESTION 21
You are troubleshooting an intermittent video issue on an PowerBook G4 (17-inch 1.67 GHz). Which of the following is the most appropriate way to approach this problem?
A. Do nothing. The problem may resolve itself.
B. Run looping diagnostics to verify the issue.
C. Replace the Display Assembly inside the PowerBook.
D. Follow component isolation steps to resolve the issue.

Correct Answer: B
QUESTION 22
Which of the following is ALMOST CERTAINLY a hardware-related problem?
A. No video at startup
B. Error beep at startup
C. Distorted video at startup
D. Blinking question mark at startup

Correct Answer: B
QUESTION 23
You are troubleshooting an iBook G4 that will not boot, and emits error tones when powered on. You suspect that the customer may have installed incompatible or faulty RAM, but you aren’t sure. What should you do to verify the RAM requirements for this iBook G4?
A. Call Apple.
B. Order Apple RAM.
C. Check Specifications.
D. Count the RAM sockets on the logic board.

Correct Answer: C
QUESTION 24
Which of the following is the best way to eject a disc when normal methods for ejecting it, such as using the Mac OS X Finder or the keyboard, have not succeeded?
A. Boot into Open Firmware and type ‘reset-nvram’.
B. Restart the computer while holding down the trackpad button.
C. Remove and disassemble the optical drive to remove the disc.
D. Remove the computer’s front bezel and manually pry the disc out of the drive.

Correct Answer: B
QUESTION 25
Which of the following would be the most appropriate question to ask FIRST, when gathering information from customers about a problem with their Apple product?
A. What is the issue?
B. What operating system are you using?
C. Did you turn off the computer improperly?
D. Is this the first time you have had this problem?

Correct Answer: A QUESTION 26
A customer’s PowerBook G4 (12-inch 1.5GHz) fails to power on with a known-good power adapter connected and plugged in. Which of the following steps should be tried FIRST?
A. Replace the logic board.
B. Replace the DC-In Board.
C. Run Apple Service Diagnostic.
D. Perform a keyboard PMU reset.

Correct Answer: D QUESTION 27
The image displayed on an iBook (Late 2004) appears small and does not fill the screen. Which of the following best explains the cause of this symptom?
A. The logic board has failed.
B. The display backlight has failed.
C. The iBook’s battery power is depleted.
D. An earlier version of system software is installed.

Correct Answer: D QUESTION 28
A PowerBook G4 (17-inch 1.67GHz) has a malfunctioning logic board. You replace the logic board. Which of the following diagnostic utilities should you run to verify that the new logic board is functioning properly?
A. MacTest Pro
B. Disk First Aid
C. TechTool Deluxe
D. Apple Service Diagnostic

Correct Answer: D QUESTION 29
Verifying that a computer functions properly after you repair it ensures that _____.
A. No new issues have arisen.
B. Third-party software is working.
C. The original issue has been resolved.
D. The computer falls under service warranty.
E. System Preferences settings are set correctly.

Correct Answer: AC QUESTION 30
Which of the following is a valid reason to perform a soft reset on an AirPort Extreme Base Station?
A. to update base station firmware
B. to reset the base station password
C. to return the base station to its default settings
D. to erase AirPort client software from Mac OS X Correct Answer: B
QUESTION 31
AirPort Extreme operates under which TWO of the following IEEE standards?
A. 802.11a
B. 802.11b
C. 802.11c
D. 802.11g
E. 802.11h
F. 802.11i

Correct Answer: BD
QUESTION 32
A customer states that he cannot transfer files over the Internet after connecting his new iBook G4 (Late 2004) to his cable modem via Ethernet. According to the Apple General Troubleshooting Flowchart, which of the following is the most efficient area to pursue FIRST?
A. The Internet Connect application is not running.
B. The iBook is not running the latest version of Mac OS X.
C. The computer and cable modem are not compatible with each other.
D. The iBook network system preferences are not configured properly.

Correct Answer: D
QUESTION 33
A customer states that he cannot access the Internet after connecting his new PowerBook G4 (12-inch 1 GHz) to his cable modem via Ethernet. Which of the following is most likely the cause of this problem?
A. AppleTalk is not enabled on the computer’s Ethernet port.
B. The computer is not running the latest version of Mac OS X.
C. A faulty cable was used to connect the computer and the cable modem.
D. The cable modem’s Ethernet port is not compatible with the computer’s Ethernet port.

Correct Answer: C
QUESTION 34
A customer complains that his PowerBook G4 (17-inch) will not allow a number of other workers in his office to share his files simultaneously. All the other computers are iMac G5 that are networked and configured properly. According to the Apple General Troubleshooting Flowchart which of the following is the best area to explore FIRST?
A. Does the customer have a firewall enabled?
B. Is the customer’s PowerBook Ethernet port faulty?
C. How many simultaneous users does the customer’s network have?
D. What version of Mac OS X is the customer’s PowerBook running?

Correct Answer: C
QUESTION 35
A customer claims that her iBook G4 cannot connect to her AirPort Express network at home. Which of the following would be the BEST question to ask her FIRST?
A. Can any other computer successfully join this network?
B. Does your ISP support wireless access to the Internet?
C. What type of wireless card is installed in your iBook G4?
D. Have you upgraded to Mac OS X v10.4.2?

Correct Answer: A QUESTION 36
Which of the following AirPort Extreme ports should be used to connect to a DSL or Cable modem for Internet access?
A. LAN
B. WAN
C. Modem
D. Antenna

Correct Answer: B QUESTION 37
To utilize Gigabit Ethernet, you must use an Ethernet cable with:
A. two wires (one pair) present.
B. four wires (two pairs) present.
C. six wires (three pairs) present.
D. eight wires (four pairs) present.

Correct Answer: D QUESTION 38
Basic computer-to-computer wireless networking with AirPort requires _____.
A. two or more AirPort clients
B. two or more AirPort Base Stations
C. version 2.0.4 or later of the AirPort software
D. an AirPort Base Station and an AirPort client

Correct Answer: A QUESTION 39
A customer states that when an external antenna is connected to her AirPort Extreme Base Station, the external antenna does not appear in the Show Summary screen of AirPort Admin Utility. What is the most likely problem?
A. The base station’s firmware needs to be updated.
B. The base station is malfunctioning and requires service.
C. The base station needs to be powered down and restarted.
D. The base station needs to be upgraded to use the external antenna.

Correct Answer: C QUESTION 40
A customer states that she sees an error message appear when she opens her Web browser with her iBook G4 using dial-up Internet service. The message displayed in the Web browser is “The specified server could not be found.” When she attempts to access the same Web page a second time the Web page is loaded without a problem. Which of the following is the BEST explanation for what is happening?
A. The iBook needs to warm up before it can access the Web page.
B. The Web browser is configured to only access Web pages when reloaded.
C. The iBook dial-up modem is configured for extra error correction resulting in the delay.
D. The Web browser attempted to load the page before the iBook dial-up modem had finished connecting to the Internet Service Provider.

Correct Answer: D QUESTION 41
A PowerBook G4 that only requires a 45-Watt AC adapter will charge its main battery faster if a 65-Watt AC adapter is connected.
A. True
B. False

Correct Answer: B QUESTION 42
What is the proper way to calibrate a lithium Ion battery used in a PowerBook G4 or iBook?
A. Charge the battery while running the Battery Calibration Utility.
B. The battery is calibrated out of the box; no further steps are needed.
C. Charge the battery fully. Run computer on battery until it goes to sleep. Charge it fully again.
D. Charge the battery overnight. Make sure battery status indicates 100% before disconnecting AC adapter.

Correct Answer: C QUESTION 43
Which THREE of the following have an effect on the lifespan of Lithium Ion batteries used in PowerBooks and iBooks?
A. Memory effect
B. Processor speed
C. Energy Saver settings
D. Temperature extremes
E. Number of discharge cycles

Correct Answer: CDE QUESTION 44
Which of the following steps is NOT recommended to maximize battery life in a PowerBook G4?
A. Reduce brightness settings
B. Turn AirPort card off if installed
C. Disconnect any bus-powered USB peripherals
D. Remove any PC (PCMCIA) card from the PC card expansion slot.
E. Choose ‘Highest Performance’ in the Energy Saver System Preferences

Correct Answer: E QUESTION 45
What does recalibrating a Lithium Ion battery inside a PowerBook or iBook actually do?
A. Reconditions the battery to overcome the memory effect.
B. Keeps the onscreen battery time and percent display accurate.
C. Extends the number of full discharge cycles available in the battery.
D. Readjusts the Energy Saver preferences to correspond to the battery’s performance.

Correct Answer: B QUESTION 46
How often should you calibrate a PowerBook G4’s Lithium Ion battery?
A. Never
B. Just once when you first use the PowerBook
C. Whenever the PowerBook is forced into sleep mode
D. When you first use the PowerBook and then every couple of months thereafter

Correct Answer: D QUESTION 47
A customer asks about RAM speed requirements to upgrade his iBook G4 (Late 2004). What Apple resource should you refer this customer to?
A. Downloads
B. Discussions
C. User’s manual
D. Service manual

Correct Answer: C QUESTION 48
You require additional information about a specific problem with a customer’s iBook G4.
Which one of the following resources is the Apple-recommended choice for researching the problem?

A. Downloads
B. Discussions
C. User’s manual
D. Knowledge Base

Correct Answer: D QUESTION 49
According to Apple service manuals, what steps should you take before performing any take-apart steps when replacing a part in any Apple product?
A. Lay the product on its side so it will not fall over.
B. Update the product’s firmware to the latest version.
C. Discharge the CRT and establish an ongoing ground.
D. Gather all necessary tools and perform all preliminary steps.
E. Order all available service parts for the appropriate configuration of the product.

Correct Answer: D QUESTION 50
Which section of the PowerBook G4 (12-inch 1.5 GHz) Service manual is the BEST place to look for instructions for replacing a DC-In board?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting

Correct Answer: C QUESTION 51
Where is the BEST place to look for information regarding special take-apart tools for an Apple product?
A. Discussions
B. Service News
C. User’s manual
D. Service manual

Correct Answer: D
QUESTION 52
Which of the following can permanently damage an LCD display?
A. Rubbing the display.
B. Using a screen saver.
C. Not using a screen saver.
D. Turning brightness up too high.

Correct Answer: A
QUESTION 53
Identify the correct procedure to reset the Power Manager on a PowerBook G4 (12-inch 1.5GHz).
A. Press the PMU Reset button on the main logic board.
B. Shut the computer down and press the reset button for 10 to 15 seconds.
C. Shut the computer down and press Shift-Control-Option-Power on the keyboard.
D. Remove the AC power adapter and battery, and let the computer sit for a minimum of 15 minutes.

Correct Answer: C
QUESTION 54
An iBook operating on battery power is in sleep mode and cannot be awakened. Which of the following is most likely the cause of this problem?
A. The iBook is malfunctioning.
B. The iBook has a crashed PMU.
C. The iBook’s battery is too low to operate the iBook.
D. The iBook’s security features have been activated.

Correct Answer: C
QUESTION 55
Which THREE of the following symptoms would be best resolved by performing a PMU reset as a first step?
A. Computer does not turn on
B. Fans run too loudly after startup
C. Network / Internet connectivity issues
D. USB and/or FireWire port(s) do not function
E. Computer does not sleep / wake from sleep
Correct Answer: ADE
QUESTION 56
What is the function of the PMU in an Apple portable computer?
A. The PMU controls all aspects of power flow.
B. The PMU controls the speed of the hard drive.
C. The PMU manages the amount of virtual memory used.
D. The PMU manages all communication with attached peripherals.

Correct Answer: A QUESTION 57
An iBook G4 is running from the AC adapter, and has a battery installed which is charging. Which TWO of the following indicate that the battery is fully charged?
A. The iBook backlight will return to full intensity.
B. All lights on the battery will illuminate when the button on the battery is pressed.
C. The sleep light will blink three times, indicating that the iBook is no longer charging.
D. The lighted ring on the power adapter connector will change from amber to green.
E. The sleep light will solidly illuminate, indicating that the iBook can be powered on or awakened from sleep.

Correct Answer: BD QUESTION 58
Which THREE of the following actions can put a PowerBook to sleep?
A. Close the PowerBook lid.
B. Press Command-Option-S.
C. Select Sleep from the Apple menu.
D. Select Sleep from the Location Manager.
E. Select Sleep in the Energy Saver pane of System Preferences.
F. Press the Power button and select Sleep from the dialog box.

Correct Answer: ACF QUESTION 59
A customer needs to transfer data from her PowerBook G4 (17-inch 1.67 GHz) for use on her Power Mac G5, but the PowerBook fails to start up completely due to a video issue.
Which of the following would most easily accomplish the data transfer?
A. Remove the hard drive from the PowerBook and install it into the Power Mac G5.
B. The PowerBook will need to be repaired before any data can be recovered from it.
C. Boot the PowerBook into Mac OS X Safe Mode and connect the PowerBook and Power Mac G5 with an Ethernet cable.
D. Boot the PowerBook into Target Disk Mode and connect the PowerBook and Power Mac G5 with a FireWire cable.

Correct Answer: D QUESTION 60
Which of the following Apple diagnostic utilities is the most appropriate for a service technician to test an iBook (G4)?
A. Mac Test Pro
B. Tech Tool Deluxe
C. Apple Hardware Test
D. Apple Service Diagnostic

Correct Answer: D QUESTION 61
What is the first step to take if you have an iBook G4 that constantly ejects any CD / DVD that is inserted?
A. Replace the logic board.
B. Replace the optical drive.
C. Replace the optical drive cable.
D. Disconnect all peripheral devices, especially the mouse.

Correct Answer: D
QUESTION 62
You are replacing the logic board in a PowerBook G4 (12-inch 1.5 GHz). Which of the following special tools is recommended during disassembly?
A. Nylon probe tool
B. Torque screwdriver
C. Spring tensioning tool
D. Jumper adjustment tool

Correct Answer: A
QUESTION 63
Which of the following diagnostic utilities can be used by all customers to verify functionality of their own PowerBooks and iBooks?
A. Mac Test Pro
B. Apple Display Utility
C. Apple Hardware Test
D. Apple Service Diagnostic

Correct Answer: C
QUESTION 64
An iBook (G4) displays a flashing question mark at startup. Which step does Apple recommend you take FIRST?
A. Replace the logic board.
B. Try to start up from a bootable CD or DVD.
C. Reinitialize the hard disk and reinstall the Mac OS.
D. Replace the internal hard drive with a known-good hard drive.

Correct Answer: B
QUESTION 65

Apple 9L0-207 Interactive Testing Engine is an engine that can be downloaded and installed on your PC.This Apple 9L0-207 engine is not only advanced and equipped with much more features, it is also not internet dependent, once installed. It enables you to see questions and answers in a simulated Apple 9L0-207 exam environment. Working with Apple 9L0-207 Interactive Testing Engine is like passing an actual Apple 9L0-207 exam.

Flydumps C4040-108 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/c4040-108.html

Continue Reading

Apple 9L0-060 Test Software, The Most Apple 9L0-060 Free Dowload For Download

Welcome to download the newest Pass4itsure MB6-700 VCE dumps: http://www.pass4itsure.com/MB6-700.html

Are you struggling for the Apple 9L0-060 exam? Good news,Just try Flydumps Apple 9L0-060 exam dumps,it will help you a lot.In Flydumps new Apple 9L0-060 vce or pdf braindump file,you can get all the Apple 9L0-060 new questions and answers,we ensure high pass rate and money back guarantee.

QUESTION 22
Which utility can gather information about a wide range of system components?
A. Setup Assistant
B. System Profiler
C. Keychain Access
D. Internet Connect
E. Network Diagnostics

Correct Answer: B
QUESTION 23
The Console utility.____________________
A. displays log files
B. enables root access
C. invokes the command line
D. controls monitor configuration

Correct Answer: A
QUESTION 24
Which THREE network connections can you troubleshoot using Mac OS X 10.4 Network Diagnostics?
A. AirPort
B. Internal Modem
C. Built-in-Ethernet
D. Built-in-FireWire
E. Bluetooth Modems

Correct Answer: ABC
QUESTION 25
You should be able to connect to an AirPort network when your iBook starts up in Safe Mode in Mac OS X
10.4.
A. True
B. False
Correct Answer: B
QUESTION 26
Where can you reset the User Account password?
A. Disk Utility
B. Security system preference
C. Accounts system preference
D. Reset Password from the install disc
E. Login window ‘Forgot Password’ button
Correct Answer: CD
QUESTION 27
What is the best way to resolve most application/frameworks mismatches in Mac OS X 10.4?
A. Create a new user
B. Repair permissions
C. Run Software Update
D. Reinstall the application
E. Archive and install Mac OS X

Correct Answer: C QUESTION 28
What does starting up in Safe Mode in Mac OS X 10.4 do?
A. It disables Auto-login
B. It disable all Startup items
C. It disables all non-system fonts
D. It moves font caches to the trash
E. It disables only Non-Apple Startup items

Correct Answer: ABCD QUESTION 29
Mac OS X 10.4 Disk Utility lets you run Verify Disk on the current startup volume.
A. True
B. False

Correct Answer: B QUESTION 30
Which two options should be used when Disk Utility cant repair a disk in Mac OS X 10.4?
A. Back up the data, and erase and install Mac OS X
B. Archive and install Mac OS X preserving user and network settings
C. Click Repair Disk one more time to see if a second attempt resolves the issue
D. Archive and Install Mac OS X WITHOUT preserving user and network settings
E. Back up the data and use a Mac OS X 10.4 compatible third-party utility to repair the disk

Correct Answer: AE QUESTION 31

Apple 9L0-060 tests containing questions that cover all sides of tested subjects that help our members to be prepared and keep high level of professionalism.The main purpose of Apple 9L0-060 exam is to provide high quality test that can secure and verify knowledge, give overview of question types and complexity that can be represented on real exam certification.

Flydumps MB6-700 dumps with PDF + Premium VCE + VCE Simulator: https://www.pass4itsure.com/mb6-700.html

Continue Reading